Accton Technology CheetahSwitch Workgroup-3726M Manuel utilisateur

CheetahSwitch Workgroup-3726M

Quick Installation Guide

CheetahSwitch Workgroup-3726M

Intelligent/Stackable Fast Ethernet Switch

with 24 10BASE-T / 100BASE-TX (RJ-45) Ports,

and Optional Media Expansion and Stack Modules

Accton is a trademark of Accton Technology Corporation. Other trademarks or brand names mentioned

herein are trademarks or registered trademarks of their respective companies.

International Headquarters

No. 1 Creation Road III,

Science-based Industrial Park

Hsinchu 300, Taiwan, R.O.C.

Phone: +886-3-5770-270

Fax: +886-3-5770-267

Internet: support@accton.com.tw

Europe Headquarters

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí,

Barcelona, Spain.

Phone: +34-93-477-4920

Fax: +34-93-477-3774

Asia Pacific Headquarters

1 Claymore Drive

#08-05/06 Orchard Towers (Rear Block)

Singapore 229594

Phone: +65 238 6556

Fax: +65 238 6466

Internet: www.acctontech.com

USA Headquarters

6 Hughes

Irvine, CA 92618

Phone Numbers:

Sales: +800-926-9288

Support: +888-398-4101 or +949-707-4847

RMA: +800-762-4968

Fax: +949-707-2460

No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of Accton Technology Corporation.

Accton makes no warranties with respect to this documentation and disclaims any implied warranties of

merchantability, quality, or fitness for any particular purpose. The information in this document is subject to

change without notice. Accton reserves the right to make revisions to this publication without obligation to

notify any person or entity of any such changes.

On-line Registration

For quick warranty registration, log on our website at http://register.acctontech.com to register your Accton

products.

AC-ES3726M

E012002-R01

F2.476 150200008100A

Limited Warranty

Accton Technology Corporation

Limited Warranty: Accton warrants all is products to be free of manufacturing defects in

workmanship and materials, under normal use and service, for the applicable warranty

term. All Accton products carry a standard 90-day limited warranty from the date of

purchase from Accton or its Authorized Reseller. Accton may, at its own discretion, repair

or replace any product not operating as warranted with a similar or functionally equivalent

product, during the applicable warranty term.

The standard limited warranty can be upgraded to a Limited Lifetime* warranty by

registering new products within 30 days of purchase from Accton or its Authorized

Reseller. Registration can be accomplished via the enclosed product registration card or

online via the Accton web site. Failure to register will not affect the standard limited

warranty. The Limited Lifetime warranty covers a product during the Life of that Product,

which is defined as the period of time during which the product is an ‘Active’ Accton

product. A product is considered to be ‘Active’ while it is listed on the current Accton price

list. As new technologies emerge, older technologies become obsolete and Accton will, at

its discretion, replace an older product in its product line with one that incorporates these

newer technologies. At that point, the obsolete product is discontinued and is no longer

an ‘Active’ Accton product. A list of discontinued products is attached with the firmware,

configuration information, or memory data of Customer contained in, stored on, or

integrated with any products returned to Accton pursuant to any warranty. Products

returned to Accton should have any customer-installed accessory or add-on components,

such as expansion modules, removed prior to returning the product for replacement.

Accton is not responsible for these items if they are returned with the product.

Customers must contact Accton for a Return Material Authorization number prior to

returning any product to Accton. Proof of purchase may be required. Any product

returned to Accton without a valid Return Material Authorization (RMA) number clearly

marked on the outside of the package will be returned to customer at customer’s

expense. Customers are responsible for all shipping charges from their facility to Accton.

Accton is responsible for return shipping charges from Accton to customer.

WARRANTIES EXCLUSIVE: IF AN ACCTON PRODUCT DOES NOT

OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY

SHALL BE REPAIR OR REPLACEMENT OF THE PRODUCT IN QUESTION,

AT ACCTON’S OPTION. THE FOREGOING WARRANTIES AND REMEDIES

ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES OR

CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY

OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING

WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE. ACCTON NEITHER ASSUMES NOR

AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER

LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,

MAINTENANCE OR USE OF ITS PRODUCTS. ACCTON SHALL NOT BE

Limited Warranty

LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION

DISCLOSE THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST

OR WAS CAUSED BY CUSTOMER'S OR ANY THIRD PERSON'S MISUSE,

NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED

ATTEMPTS TO REPAIR, OR ANY OTHER CAUSE BEYOND THE RANGE OF

THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER

HAZARD.

LIMITATION OF LIABILITY: IN NO EVENT, WHETHER BASED IN

CONTRACT OR TORT (INCLUDING NEGLIGENCE), SHALL ACCTON BE

LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR

PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE, LOSS

OF BUSINESS, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN

CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,

PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS PRODUCTS, EVEN

IF ACCTON OR ITS AUTHORIZED RESELLER HAS BEEN ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES.

SOME COUNTRIES DO NOT ALLOW THE EXCLUSION OF IMPLIED

WARRANTIES OR THE LIMITATION OF INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, SO THE

ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO YOU. THIS

WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, WHICH MAY VARY

FROM STATE TO STATE. NOTHING IN THIS WARRANTY SHALL BE

TAKEN TO AFFECT YOUR STATUTORY RIGHTS.

* Accton will provide warranty service for up to three years following

discontinuance from the active Accton price list. Under the limited lifetime

warranty, internal and external power supplies, fans, and cables are covered by a

standard one-year warranty from date of purchase.

Contents

Introduction 1

Installing the Switch 2

Package Contents 2

Description of Hardware 2

Mounting the Switch 3

Stacking Switches on a Flat Surface 3

Mounting Switches in a Rack 4

Installing a Management Module 4

Installing Optional Media and Stacking Modules 4

Connecting to the Stack’s Backplane 5

Connecting the Switch System 6

Making a Connection to an RJ-45 Port 6

Connecting to a 100BASE-FX Port 7

Connecting to a Gigabit Fiber Optic Port 7

Powering On the Switch 8

Verifying Port Status 9

Verifying System Operation 9

Applications 10

Product Specifications 11

Base Unit 11

Physical Characteristics 11

Switching Criteria 12

Traffic Control 12

Modules 12

Management Module (AC-ES3726M-AGENT) 12

100BASE-FX Module (EM3582-FX-SC) 12

1000BASE-SX Module (EM4582-SX-SC) 13

1000BASE-LX Module (EM4582-LX-SC) 13

Stacking Module (EM3580-STACK) 13

Troubleshooting 13

Diagnosing Switch Indicators 13

Power and Cooling Problems 14

Installation 14

Port and Cable Assignments 15

RJ-45 Port Description 15

Straight-Through Wiring 15

Crossover Wiring 15

EMI Certification 16

FCC Class A Certification (USA) 16

Contents

Canada Department of Communications - Class A 16

BSMI Class A (Taiwan) 16

VCCI Class A Compliance (Japan) 16

CE Mark Declaration of Conformance for EMI and Safety (EEC) 17

Safety Compliance 18

Warning: Fiber Optic Port Safety 18

Avertissment: Ports pour fibres optiques - sécurité sur le plan optique 18

Warnhinweis: Faseroptikanschlüsse - Optische Sicherheit 18

Underwriters Laboratories Inc. (USA) 18

Wichtige Sicherheitshinweise (Germany) 19

Optional Hardware Modules 20

Introduction

The CheetahSwitch Workgroup-3726M is perfect for moving workgroups from

conventional 10 Mbps Ethernet to multiple-segment 100 Mbps Fast Ethernet, and

for consolidating your network equipment into a single, clean, efficient, and

super-fast switch stack. This switch system delivers dedicated 100 Mbps links to

each attached LAN segment (independent collision domain) or to any PC attached

directly to the stack – all with conventional cabling and adapters. It completely

eliminates the bottlenecks of shared 10 Mbps Ethernet networks by providing a wide

bandwidth of up to 8.8 Gbps per switch, and a stack backplane that can operate at

up to 9.6 Gbps. This makes it ideal for increasing the throughput of interconnected

Ethernet and Fast Ethernet hubs or server farms.

This switch includes three slots on the rear panel for various modules:

• The upper slot is for an SNMP/RMON Management Module. The stack supports only

one management agent.

• The lower right slot is for optional media expansion modules, including a dual-port

100 Mbps fiber optic module that can be connected to a remote site up to

2 kilometers (1.24 miles) away, or a single-port Gigabit module that can be used to

uplink to a collapsed Gigabit backbone or for a high-speed server connection.

• The lower left slot is for either an optional media expansion module or Stacking

Module. (Up to four switch units can be stacked together using Stacking Modules.)

When the Management Module is installed, this system can provide a wide array of

advanced features:

• Master agent module manages entire stack in-band or out-of-band

• Backup agent module provides fault tolerance*

• Supports Telnet, SNMP/RMON and Web-based interface

• Four-group RMON (including Statistics, History, Alarms and Events)

• Spanning Tree Algorithm for redundant paths between switches

• VLAN support for up to 256 groups, port-based or with 802.1Q VLAN tagging

• GVRP for automatic VLAN learning*

• IGMP multicast filtering

• Quality of Service supports two levels of priority with Weighted Fair Queueing

• Configurable broadcast storm control

• Port mirroring (for real-time debugging without affecting the target port)

• Port trunking (up to 5 trunks per switch or 12 trunks for the entire stack, each trunk

contains 2~4 ports)

* This feature is not supported in the current firmware release.

The agent module allows you to configure or monitor the switch using the embedded

management program or SNMP/RMON applications. To manage the switch, you can

make a direct connection to the console port. You can also make a network

connection to manage the switch using Telnet, the Web agent, or Accton’s free

Windows-based network management software called AccView/Open.

Quick Installation Guide

Installing the Switch

Before installing the switch verify that you have all the items listed under “Package

Contents.” If any of the items are missing or damaged, contact your local Accton

distributor. Also be sure you have all the necessary tools and cabling before

installing the switch. Note that this switch can be installed on any suitably large flat

surface or in a standard EIA 19-inch rack. After installing the switch, refer to the

Management Guide to set up its more advanced features, such as Spanning Tree

Protocol or VLAN port groups.

Package Contents

This package includes:

Description of Hardware

The base unit contains 24 10BASE-T/100BASE-TX ports, plus three slots on the

rear panel for various modules. A Management Module can be installed in the upper

slot on the rear panel (see “Installing a Management Module” on page 4). The

lower-left slot can be used for an optional media expansion module or Stacking

Module, while the lower-right slot can be used for a media expansion module. Note

that the media expansion modules include a Fast Ethernet fiber optic module with

two 100BASE-FX (SC type) ports or a one port Gigabit 1000BASE-SX (SC type), or

1000BASE-LX uplink module.

All RJ-45 ports on the base unit operate at 10 or 100 Mbps, and support

auto-negotiation of speed, duplex mode (i.e., half or full duplex), and flow control.

The 1000BASE-SX and 1000BASE-LX ports are fixed at 1000 Mbps but

auto-negotiate duplex mode. The 100BASE-FX module is fixed at the 100 Mbps, full

duplex. All media types can auto-negotiate flow control.

Note that when using auto-negotiation, the speed, transmission mode and flow

control can be automatically set if this feature is also supported by the attached

device. Otherwise, these items can be manually configured for any connection.

The base unit also includes a display panel for key system and port indications that

simplify installation and network troubleshooting.

• CheetahSwitch Workgroup-3726M (Model No. AC-ES3726M)

• Four rubber foot pads • This Quick Installation Guide

• Rack mount bracket kit • Owner registration card

• AC power cord

Table des matières

Autres manuels Accton Technology Changer

Accton Technology

Accton Technology CheetaHub Classic-2041 Manuel utilisateur

Accton Technology

Accton Technology VS4512DC Manuel de programmation

Accton Technology

Accton Technology Fast EtherHub-8s Manuel utilisateur

Accton Technology

Accton Technology Zilla Dual-Speed Hub-3008R Manuel utilisateur

Accton Technology

Accton Technology Volare Sensor 2 Manuel utilisateur

Accton Technology

Accton Technology SwitcHub-7s Manuel utilisateur

Accton Technology

Accton Technology CheetahSwitch Workgroup-3627 Manuel utilisateur

Accton Technology

Accton Technology CHEETAHUB POWER-3012A Manuel utilisateur

Accton Technology

Accton Technology EH2045S Manuel utilisateur

Accton Technology

Accton Technology ES4512C Manuel de programmation

Accton Technology

Accton Technology Fast EtherHub-12se Manuel utilisateur

Accton Technology

Accton Technology EtherHub-16 Manuel utilisateur

Accton Technology

Accton Technology SwitcHub-2se Manuel utilisateur

Accton Technology

Accton Technology ES3616 Manuel de programmation

Accton Technology

Accton Technology EH3016G Manuel utilisateur

Accton Technology

Accton Technology CheetaHub Power-3008A Manuel utilisateur

Accton Technology

Accton Technology Edge-Core ES4528V Manuel utilisateur

Accton Technology

Accton Technology USB204B Manuel utilisateur

Accton Technology

Accton Technology VM2524 Manuel utilisateur

Accton Technology

Accton Technology 24/48 10/100 Ports + 2GE Manuel de programmation

Accton Technology

Accton Technology Classic-2040 Manuel utilisateur

Accton Technology

Accton Technology USB204A Manuel utilisateur

Accton Technology

Accton Technology CheetaHub Power-3012B Manuel utilisateur

Accton Technology

Accton Technology USB204A Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur