Accton Technology VS4512DC Manuel de programmation

VDSL Switch-VS4512

VDSL Switch-VS4512DC

Management Guide

VDSL Switch-V4512

VDSL Switch (with AC power connector) supporting 12 VDSL lines, with

2 Slots for Optional 1000BASE-SX, 1000BASE-LX, 1000BASE-T or

1000BASE-X GBIC uplink modules

VDSL Switch-VS4512DC

VDSL Switch (with DC power connector) supporting 12 VDSL lines, with

2 Slots for Optional 1000BASE-SX, 1000BASE-LX, 1000BASE-T or

1000BASE-X GBIC uplink modules

Accton is a trademark of Accton Technology Corporation. Other trademarks or brand names mentioned

herein are trademarks or registered trademarks of their respective companies.

International Headquarters

No. 1 Creation Road III,

Science-based Industrial Park

Hsinchu 300, Taiwan

Phone: 886-3-5770-270

Fax: 886-3-5770-267

Internet: support@accton.com.tw

Asia Pacific Headquarters

1 Claymore Drive

#08-05/06 Orchard Towers (Rear Block)

Singapore 229594

Phone: +65 238 6556

Fax: +65 238 6466

Internet: www.acctontech.com

Europe Headquarters

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí,

Barcelona, Spain.

Phone: +34-93-477-4920

Fax: +34-93-477-3774

No part of this document may be copied or reproduced in any form or by any means without the prior written

consent of Accton Technology Corporation.

Accton makes no warranties with respect to this documentation and disclaims any implied warranties of

merchantability, quality, or fitness for any particular purpose. The information in this document is subject to

change without notice. Accton reserves the right to make revisions to this publication without obligation to

notify any person or entity of any such changes.

VS4512

VS4512DC

F1.0.4.0 E122003-R02

150000041800A

Contents

Chapter 1: Introduction 1-1

Key Features 1-1

Description of Software Features 1-2

System Defaults 1-5

Chapter 2: Initial Configuration 2-1

Connecting to the Switch 2-1

Configuration Options 2-1

Required Connections 2-2

Remote Connections 2-3

Basic Configuration 2-3

Console Connection 2-3

Setting Passwords 2-4

Setting an IP Address 2-4

Manual Configuration 2-4

Dynamic Configuration 2-5

Enabling SNMP Management Access 2-6

Community Strings 2-6

Trap Receivers 2-7

Saving Configuration Settings 2-7

Managing System Files 2-8

Chapter 3: Configuring the Switch 3-1

Using the Web Interface 3-1

Navigating the Web Browser Interface 3-2

Home Page 3-2

Configuration Options 3-2

Panel Display 3-3

Main Menu 3-3

Basic Configuration 3-7

Displaying System Information 3-7

Displaying Switch Hardware/Software Versions 3-9

Displaying Bridge Extension Capabilities 3-10

Setting the Switch’s IP Address 3-11

Manual Configuration 3-12

Using DHCP/BOOTP 3-13

Fan Status 3-14

Managing Firmware 3-14

Downloading System Software from a Server 3-15

Contents

Saving or Restoring Configuration Settings 3-16

Downloading Configuration Settings from a Server 3-16

Setting the Startup Configuration File 3-17

Copying the Running Configuration to a File 3-17

Resetting the System 3-18

Setting the System Clock 3-18

Configuring SNTP 3-18

Setting the Time Zone 3-19

Simple Network Management Protocol 3-20

Setting Community Access Strings 3-21

Specifying Trap Managers and Trap Types 3-22

Filtering Addresses for SNMP Client Access 3-23

User Authentication. 3-24

Configuring the Logon Password 3-24

Configuring Local/Remote Logon Authentication 3-25

Telnet Settings 3-28

Configuring HTTPS 3-28

Replacing the Default Secure-site Certificate 3-29

Configuring the Secure Shell 3-30

Configuring Port Security 3-31

Configuring 802.1x Port Authentication 3-33

Displaying 802.1x Global Settings 3-34

Configuring 802.1x Global Settings 3-36

Configuring Port Authorization Mode 3-37

Displaying 802.1x Statistics 3-38

Port Configuration 3-39

Displaying Connection Status 3-39

Configuring Interface Connections 3-42

Creating Trunk Groups 3-44

Statically Configuring a Trunk 3-45

Enabling LACP on Selected Ports 3-46

Setting Broadcast Storm Thresholds 3-48

Configuring Port Mirroring 3-49

Configuring Rate Limits 3-50

Showing Port Statistics 3-51

VDSL Configuration 3-56

VDSL Global Configuration 3-56

VDSL Port Configuration 3-58

VDSL Port Link Status 3-61

Displaying VDSL Port Ethernet Statistics 3-64

VDSL Line Configuration 3-65

Displaying VDSL Interface Information 3-66

VDSL Performance Monitor Information 3-69

Monitoring VDSL Performance History 3-72

Contents

iii

Address Table Settings 3-73

Setting Static Addresses 3-73

Displaying the Address Table 3-74

Changing the Aging Time 3-75

Spanning Tree Algorithm Configuration 3-76

Displaying Global Settings 3-77

Configuring Global Settings 3-79

Displaying Interface Settings 3-81

Configuring Interface Settings 3-84

VLAN Configuration 3-86

Overview 3-86

Assigning Ports to VLANs 3-87

Forwarding Tagged/Untagged Frames 3-88

Displaying Basic VLAN Information 3-88

Displaying Current VLANs 3-89

Creating VLANs 3-91

Adding Static Members to VLANs (VLAN Index) 3-92

Adding Static Members to VLANs (Port Index) 3-93

Configuring VLAN Behavior for Interfaces 3-94

Configuring Private VLANs 3-96

Enabling Private VLANs 3-97

Configuring Uplink and Downlink Ports 3-97

Class of Service Configuration 3-98

Setting the Default Priority for Interfaces 3-98

Mapping CoS Values to Egress Queues 3-100

Selecting the Queue Mode 3-101

Setting the Service Weight for Traffic Classes 3-102

Mapping Layer 3/4 Priorities to CoS Values 3-103

Selecting IP Precedence/DSCP Priority 3-103

Mapping IP Precedence 3-104

Mapping DSCP Priority 3-105

Mapping IP Port Priority 3-107

Copy Priority Settings 3-108

Multicast Filtering 3-109

Layer 2 IGMP (Snooping and Query) 3-109

Configuring IGMP Snooping and Query Parameters 3-110

Displaying Interfaces Attached to a Multicast Router 3-111

Specifying Static Interfaces for a Multicast Router 3-112

Displaying Port Members of Multicast Services 3-113

Assigning Ports to Multicast Services 3-114

Contents

Chapter 4: Command Line Interface 4-1

Using the Command Line Interface 4-1

Accessing the CLI 4-1

Console Connection 4-1

Telnet Connection 4-1

Entering Commands 4-3

Keywords and Arguments 4-3

Minimum Abbreviation 4-3

Command Completion 4-3

Getting Help on Commands 4-3

Showing Commands 4-4

Partial Keyword Lookup 4-4

Negating the Effect of Commands 4-5

Using Command History 4-5

Understanding Command Modes 4-5

Exec Commands 4-5

Configuration Commands 4-6

Command Line Processing 4-7

Command Groups 4-8

Line Commands 4-9

line 4-9

password 4-11

exec-timeout 4-12

password-thresh 4-12

silent-time 4-13

databits 4-14

parity 4-14

speed 4-15

stopbits 4-16

disconnect 4-16

show line 4-17

General Commands 4-17

enable 4-18

disable 4-18

configure 4-19

show history 4-19

reload 4-20

end 4-21

exit 4-21

quit 4-21

System Management Commands 4-22

Device Designation Commands 4-22

prompt 4-23

hostname 4-23

Contents

User Access Commands 4-24

username 4-24

enable password 4-25

IP Filter Commands 4-26

management 4-26

show management 4-27

Web Server Commands 4-28

ip http port 4-28

ip http server 4-28

ip http secure-server 4-29

ip http secure-port 4-30

ip telnet server 4-30

Secure Shell Commands 4-31

ip ssh server 4-31

ip ssh timeout 4-32

ip ssh authentication-retries 4-33

disconnect ssh 4-33

show ip ssh 4-34

show ssh 4-34

Event Logging Commands 4-35

logging on 4-35

logging history 4-36

logging host 4-37

logging facility 4-37

logging trap 4-38

clear logging 4-38

show logging 4-39

SMTP Alert Commands 4-40

logging sendmail host 4-41

logging sendmail level 4-41

logging sendmail source-email 4-42

logging sendmail destination-email 4-42

logging sendmail 4-43

show logging sendmail 4-43

Time Commands 4-44

sntp client 4-44

sntp server 4-45

sntp poll 4-46

sntp broadcast client 4-47

show sntp 4-47

clock timezone 4-48

calendar set 4-48

show calendar 4-49

Contents

System Status Commands 4-49

show startup-config 4-49

show running-config 4-51

show system 4-53

show users 4-53

show version 4-54

Flash/File Commands 4-55

copy 4-55

delete 4-57

dir 4-58

whichboot 4-59

boot system 4-59

Authentication Commands 4-60

Authentication Sequence 4-60

authentication login 4-60

RADIUS Client 4-61

radius-server host 4-61

radius-server port 4-62

radius-server key 4-62

radius-server retransmit 4-63

radius-server timeout 4-63

show radius-server 4-64

TACACS+ Client 4-64

tacacs-server host 4-64

tacacs-server port 4-65

tacacs-server key 4-65

show tacacs-server 4-66

Port Security Commands 4-66

port security 4-67

802.1x Port Authentication 4-68

authentication dot1x default 4-68

dot1x default 4-69

dot1x max-req 4-69

dot1x port-control 4-70

dot1x operation-mode 4-70

dot1x re-authenticate 4-71

dot1x re-authentication 4-71

dot1x timeout quiet-period 4-71

dot1x timeout re-authperiod 4-72

dot1x timeout tx-period 4-72

show dot1x 4-73

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Accton Technology Changer

Accton Technology

Accton Technology VM2524 Manuel utilisateur

Accton Technology

Accton Technology 24/48 10/100 Ports + 2GE Manuel de programmation

Accton Technology

Accton Technology USB204A Manuel utilisateur

Accton Technology

Accton Technology CheetahSwitch Workgroup-3627 Manuel utilisateur

Accton Technology

Accton Technology Volare Sensor 2 Manuel utilisateur

Accton Technology

Accton Technology ETHERHUB-16MI+ E0398-R01 Manuel utilisateur

Accton Technology

Accton Technology EtherHub-16 Manuel utilisateur

Accton Technology

Accton Technology ES4512C Manuel de programmation

Accton Technology

Accton Technology USB204B Manuel utilisateur

Accton Technology

Accton Technology Fast EtherHub-8s Manuel utilisateur

Accton Technology

Accton Technology CheetaHub Power-3008A Manuel utilisateur

Accton Technology

Accton Technology Cheetah iSharer-3010 Manuel utilisateur

Accton Technology

Accton Technology CheetaHub Power-3008N Manuel utilisateur

Accton Technology

Accton Technology SwitcHub-2se Manuel utilisateur

Accton Technology

Accton Technology CheetahSwitch Workgroup-3726M Manuel utilisateur

Accton Technology

Accton Technology Fast EtherHub-12s Manuel utilisateur

Accton Technology

Accton Technology ES4710BD Manuel utilisateur

Accton Technology

Accton Technology EtherHub-24s Manuel utilisateur

Accton Technology

Accton Technology Fast EtherHub 3500 Series Manuel utilisateur

Accton Technology

Accton Technology ES3616 Manuel de programmation

Accton Technology

Accton Technology ETHERHUB-16MI+ E0398-R01 Manuel utilisateur

Accton Technology

Accton Technology SwitcHub-7s Manuel utilisateur

Accton Technology

Accton Technology Edge-Core ES4528V Manuel utilisateur

Accton Technology

Accton Technology CheetahSwitch Workgroup-2027 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur