ABB Zenith ZTS T Series Manuel utilisateur

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

Zenith ZTS T-series

For ZTS(D) T-series automatic transfer

switches 1600-3000 A and ZTSCT

T-series automatic transfer switches

100-3000 A, 208-480 Vac

ZENITH ZTS(D) T-SERIES 1600-3000 A & ZTSCT T-SERIES 100-3000 A

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

—

Receiving, handling and storage

Receiving and handling

Upon receipt, carefully inspect the trans-

fer switch for damage that may have oc-

curred during transit. If damage is evi-

dent, or there is visible indication of

rough handling, immediately file a dam-

age claim with the transportation com-

pany, and notify your local ABB sales

office.

Do not remove the shipping packaging

until ready to install the switch.

Storage

If the unit will not be placed into service

immediately, store the transfer switch in

its original package in a clean, dry loca-

tion. To prevent condensation, maintain a

uniform temperature. Store the unit in a

heated building, allowing adequate air

circulation and protection from dirt and

moisture. Storing the unit outdoors could

cause harmful condensation inside the

transfer switch enclosure.

HAZARD OF EQUIPMENT

OVERTURNING

When moving with a fork lift, do not

remove the shipping packaging until the

device is in its final location.

Failure to follow this instruction may

result in personal injury or equipment

damage.

Warning

Indicates a hazardous situation that, if not

avoided, could result in death or serious

injury.

ZENITH ZTS(D) T-SERIES 1600-3000 A & ZTSCT T-SERIES 100-3000 A

—

Read these safety instructions

carefully before using this product!

HAZARD OF ELECTRIC SHOCK,

EXPLOSION, OR ARC FLASH

• Apply appropriate personal protective

equipment and follow safe electrical

work practices.

• This equipment must only be installed

and serviced by qualified electrical per-

sonnel.

• Before performing visual inspections,

tests, or maintenance on the equip-

ment, disconnect all sources of electric

power. Assume that all circuits are live

unless they are completely de-ener-

gized, tested, grounded, and tagged.

Pay particular attention to the design of

the power system. Consider all sources

of power, including the possibility of

backfeeding.

• Disconnect all sources of electric power

before removing or making source side

or load side connections to the transfer

switch.

• Always use a properly rated voltage

sensing device at all line and load con-

nections to confirm transfer switch is

disconnected from all live electrical

sources.

• Turn off power supplying transfer

switch before doing any other work on

or inside switch.

Failure to follow these instructions could

result in death or serious injury.

Danger

Indicates a hazardous situation that,

if not avoided, will result in death or

serious injury.

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

—

Operation, maintenance,

and installation

instruction

Automatic transfer

switches, Zenith

ZTS T-series ATS

INSTALLATION INSTRUCTIONS,

ZENITH ZTS T-SERIES ATS,

CHAPTERS 9–11

OPERATION AND MAINTENANCE

INSTRUCTIONS, ZENITH

ZTS T-SERIES ATS,

CHAPTERS 1–8

ZENITH ZTS(D) T-SERIES 1600-3000 A & ZTSCT T-SERIES 100-3000 A

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

—

Operation and

maintenance instruction

Automatic transfer

switches, Zenith

ZTS T-series ATS

1. Introduction 11

1.1 Hazard Categories 11

1.2 Definitions 12

1.3 Warranty 13

1.4 Product Specification 14

2. Product overview 15

2.1 General overview 16

2.1.1 Operation types 18

2.2 HMI 19

2.3 Zenith ZTS T-series features 20

2.4 Typical applications 23

2.5 Sequence of operations 25

2.5.1 Switching sequence / Automatic

(open / delayed transition) 25

2.5.2 Switching sequence / Automatic

(open / delayed transition) 31

2.6 Special features description 35

2.6.1 Automatic configuration 35

2.6.2 In-phase monitor 35

2.6.3 Powering supply scenarios 35

ZENITH ZTS(D) T-SERIES 1600-3000 A & ZTSCT T-SERIES 100-3000 A

3. General operation 37

3.1 Position indication 37

3.1.1 Position indication - R5 37

3.1.2 Position Indication - 63L 38

3.2 Operating of automatic Transfer Switch

Equipment 39

3.2.1 Operation of Automatic Transfer

Switch equipment -R5 40

3.2.2 Operation of Automatic Transfer

Switch equipment -63L 42

4. Navigating HMI menu 45

4.1 Start Menu 45

4.2 Using main menu and setting parameters 47

4.3 Menus and parameters 48

4.4 Analog meters and Measures 61

5. Electronic accessories 63

5.1 Using Ekip Connect -software 64

5.2 Using Ekip Programming -module 65

5.2.1 LED indications 65

5.3 Auxiliary power supply module 66

5.3.1 Electrical characteristics 66

5.3.2 LED indications 66

5.4 Using Ekip Signalling 2K-_ -module 67

5.4.1 Electrical characteristics of Ekip

Signalling 2K-_ -module 67

5.4.2 Access from the display / Ekip

Signalling 2K-_ -module 67

5.4.3 LED indications and inputs/outputs

of Ekip Signalling 2K-_ -module 71

5.5 Using Ekip Com _ -modules 72

5.5.1 Ekip Com Modbus RTU -module 72

5.5.2 Ekip Com Profibus DP -module 75

5.5.3 Ekip Com DeviceNet -module 78

5.5.4 Ekip Com Modbus TCP -module 82

5.5.5 Ekip Com Profinet -module 86

5.5.6 Ekip Com EtherNet/IP -module 89

OPERATION, MAINTENANCE, AND INSTALLATION GUIDE

6. Troubleshooting 93

6.1 Alarms 93

6.2 Warnings 95

6.3 Information 96

7. Technical data 97

7.1 General technical data 97

7.2 Circuit diagrams 100

7.3 Overall dimensions 103

8. Maintenance 119

9. Panel installation 111

9.1 Basic Tools for Installation

and Maintenance 112

9.2 Equipment Inspection and Storage 112

9.3 Lifting and mounting the panel 113

9.4 Mounting the automatic transfer switch 117

9.4.1 Mounting hole dimensions 117

9.4.2 Mounting hole dimensions

(stand-alone ATS, no enclosure) 118

9.4.3 HMI Installation 120

9.5 Wire Connection 121

9.6 Final Equipment Inspection 122

9.7 Initial Energizing 123

10. Accessories 125

10.1 Auxiliary power supply and Ekip -modules 125

10.2 HMI protective cover 127

11. Replacement parts 129

ZENITH ZTS(D) T-SERIES 1600-3000 A & ZTSCT T-SERIES 100-3000 A

Autres manuels pour Zenith ZTS T Series

Table des matières

Autres manuels ABB Changer

ABB

ABB Zenith ZTX Series Manuel utilisateur

ABB

ABB NE820 Manuel utilisateur

ABB

ABB UC Series Manuel d'utilisation

ABB

ABB Zenith ZTG Series Manuel utilisateur

ABB

ABB 3299-22958 Manuel utilisateur

ABB

ABB 1SLC805002F0001 Manuel utilisateur

ABB

ABB 3299-11500 Manuel utilisateur

ABB

ABB Zenith ZTG T Series Manuel utilisateur

ABB

ABB GE Entellysis Manuel utilisateur

ABB

ABB 8185.1 Manuel utilisateur

ABB

ABB 3299H-A02182 Mode d’emploi

ABB

ABB 3299A-A02100 x Guide de configuration

ABB

ABB 6805U-508 Manuel utilisateur

ABB

ABB 3299A-A12100 Manuel utilisateur

ABB

ABB SACE Tmax XT5 Manuel utilisateur

ABB

ABB SACE Tmax T5 1000V DC Manuel utilisateur

ABB

ABB FIP1001 Manuel utilisateur

ABB

ABB EDS500 Series Manuel utilisateur

ABB

ABB FAP 1011 Manuel utilisateur

ABB

ABB VUBB Manuel utilisateur

ABB

ABB ATS021 Manuel utilisateur

ABB

ABB FIP1011 Manuel utilisateur

ABB

ABB 3292U-A00003 Manuel utilisateur

ABB

ABB SACE Tmax XT Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur