ABB Orion3 Extended Manuel utilisateur

Excerpts from the original instructions

Orion3 Extended

Safety light grids

Type 4 Active Opto-electronic Protective Device (AOPD)

While every effort has been taken to ensure the accuracy of information contained in this book and any associated promotional and information

material ABB Jokab Safety cannot accept responsibility for errors or omissions and reserves the right to make any improvements without notice. It is

the user’s responsibility to ensure that this equipment is correctly designed, specified, installed, cared for and operated to meet all applicable local,

national and international codes/regulations. Technical data in our book is correct to the level of accuracy of ABB Jokab Safety´s test procedures as

verified by various international approved bodies. Other information (such as application examples, wiring diagrams, operation or use) is intended

solely to illustrate the various uses of our products. ABB Jokab Safety does not guarantee or imply that the product when used in accordance with

such examples in a particular environment will fulfil any particular safety requirement and does not assume any responsibility or liability for actual

use of the product based on the examples given.

[EN] The complete instruction manual is delivered with

the product in a digital format and can also be

downloaded from:

[SE] Den fullständiga bruksanvisningen levereras med

produkten i digitalt format och kan även laddas

ned från:

[DE] Die vollständige Bedienungsanleitung in digitaler

Form wird mit dem Produkt geliefert und steht

auch unter dieser Adresse zum Download bereit:

[IT] Il manuale di istruzioni completo viene fornito in

formato digitale con il prodotto e può anche

essere scaricato da:

[FR] La notice d'instructions complète est fournie avec

le produit au format numérique et peut également

être téléchargée sur le site :

[ES] El manual de instrucciones completo se entrega

junto con el producto en formato digital y también

puede descargarse en este enlace:

www.abb.com/jokabsafety

ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden

www.abb.com/jokabsafety

Safety information

Warning! For a correct and safe use of the Orion3 Extended light grids, the following points must be observed:

•The stopping system of the machine must be electrically controlled.

•This control system must be able to stop the hazardous movement of the machine within the total machine

stopping time T as per paragraph “Minimum installation distance” of the instruction manual, and during all

working cycle phases.

•Mounting and connection of the AOPD must be carried out by qualified personnel only, according to the

indications included in the special sections of the instruction manual and in the applicable standards.

•The AOPD must be securely placed in a particular position so that access to the hazard zone is not possible

without the interruption of the beams, see paragraph “Installation” of the instruction manual.

•The personnel operating in the hazard zone must be well trained and must have adequate knowledge of all

the operating procedures of the AOPD.

•The RESET button must be located outside the hazard zone because the operator must check the entire

hazard zone during all the reset and override operations. It must be impossible to reach the button from the

hazard zone.

•The external lamp signaling that muting is active must be visible from all operating sides.

•Please carefully respect the mounting instructions for the muting sensors, see paragraph “Muting” of the

instruction manual.

•If the external device monitoring (EDM) function is to be used, it must be activated with the dip-switches.

Please carefully read the instructions for the correct functioning before powering the AOPD.

2TLC172298M0201 2 www.abb.com/jokabsafety

2015-09-15

Installation

•The outputs (OSSD) of the AOPD must be used as machine stopping devices and not as command devices.

The machine must have its own Start command.

•The dimension of the smallest object to be detected must be larger than the resolution of the AOPD.

•The AOPD must be installed in a room complying with the technical characteristics indicated in paragraph

“Technical data” of the instruction manual.

•Do not place the AOPD near strong and/or flashing light sources or similar devices.

•Strong electromagnetic interferences can jeopardize the function of the AOPD. Please contact your

ABB Jokab Safety representative for advice.

•The operating distance of the device can be reduced in presence of smog, fog or airborne dust.

•A sudden change in environment temperature, with very low minimum peaks, can generate a small

condensation layer on the lenses and so jeopardize the function.

•Reflecting surfaces placed near the light beams of the AOPD (over, under or laterally) can cause passive

reflections. These reflections can compromise the recognition of an object inside the detection zone.

•The Muting/Override function is signaled by a muting/override lamp. Make sure that the lamp has sufficient

lighting and is visibly positioned near the hazard zone.

•Make sure to correctly use the muting sensors as described in paragraph “Muting” of the instruction manual.

•Avoid incongruent connections that cannot be controlled and thus, exclude undesired potentially dangerous

activations.

Warning! The minimum installation distance must be respected. For more information about its calculation,please

refer to the instruction manual or EN ISO 13855:2010.

Warning! Make sure to test the function and to perform the checks described in paragraph “Checks after first

installation” of the instruction manual before machine start-up.

2TLC172298M0201 3 www.abb.com/jokabsafety

2015-09-15

Electrical connections

Active unit

Pin Wire1Function Connection to

1 White RESET

ACKN.

EDM

Auto. Reset with no function +24 VDC

Auto. Reset with EDM NC contact of force-guided relay to

+24 VDC

Manual Reset with no function NC contact to +24 VDC

Manual Reset with EDM NC contact in series with NC contact of

force-guided relay to +24 VDC

2 Brown Supply +24 VDC

3 Green MUTING A Muting sensor A

4 Yellow MUTING B Muting sensor B

5 Grey OSSD1 Safety control module for ex.

6 Pink OSSD2 Safety control module for ex.

7 Blue Supply 0 V

8 Red Muting lamp Muting lamp and +24 VDC

1Colors according to ABB Jokab Safety standard cables.

2TLC172298M0201 4 www.abb.com/jokabsafety

2015-09-15

Connection example to a RT9 safety relay

2TLC172298M0201 5 www.abb.com/jokabsafety

2015-09-15

Connection of the OSSD outputs

YES

2TLC172298M0201 6 www.abb.com/jokabsafety

2015-09-15

Functions

Unscrew the cap on top of the active unit to access the dip-switches.

1 2 3 4 5 6 7 8

NB: Each function is associated with two different dip-switches: the top and bottom dip-switches must be configured in

the same manner. The “ON” position is the position at delivery.

The dip-switches allows to set the functions as described in the following table:

Dip-switches Function ON* OFF

1 Muting timeout 10 min ∞

2 T / X or L-muting T / X-muting L-muting

3 Muting filter Deactivated Activated

4 Reset of the Override Manual Automatic

5 Not used - -

6 EDM Deactivated Activated

7 Reset Automatic Manual

8 Not used - -

*Factory default configuration

Warning! An infinite muting (timeout = ∞) is not compliant with EN 61496-1:2013. Therefore, all possible risks must be

considered and related precautions undertaken before selecting the option “∞”.

Warning! The device does not accept configuration changes during normal operation. A change is taken into account

after the next powering of the device. Therefore, the management and the use of the configuration dip-switches

should be performed with great care.

2TLC172298M0201 7 www.abb.com/jokabsafety

2015-09-15

Alignment procedure

The alignment between the active and the passive unit is necessary to obtain the correct functioning of the AOPD. A

good alignment prevents outputs instability due to dust or vibration.

The alignment is perfect if the optical axes of the beams of the active unit coincide with the optical axes of the

corresponding mirrors on the passive unit.

The alignment is performed after having completed the mechanical installation and the electrical connections.

2TLC172298M0201 8 www.abb.com/jokabsafety

2015-09-15

The Alignment mode is activated by pushing the RESET push-button for at least 0.5 s at power on.

1 ) Keep the active unit in a steady position and adjust the passive unit until the yellow LED ( FIRST) turns off.

This condition shows the alignment of the first transmitter/receiver couple.

2 ) Rotate the passive unit, pivoting around the lower optics axis, until the yellow LED ( LAST) turns off.

NB: Make sure that the green LED ( ) is on and steady.

3 ) Slightly turn both units both ways to find the limits of the area in which the green LED ( ) is steady and “3” is

displayed (Maximum alignment). Place both units in the center of this area.

4 ) Fix the two units firmly using brackets.

Check that the green LED ( ) on the active unit is on when the beams are not interrupted Then check that

the red LED ( ) turns on when one single beam is interrupted. This check shall be made with the special

cylindrical “Test Piece” having a suitable size for the resolution of the device used (see paragraph “Checks after

first installation” of the instruction manual).

5 ) Switch the device off and on to normal operating mode.

Display Alignment status Alignment

quality

Output status when

out of alignment

mode

First and last couple are not aligned Bad OSSD OFF

Last couple is not aligned Bad OSSD OFF

First couple is not aligned Bad OSSD OFF

Every couple over the lower light reception

threshold and no couple over the upper

light reception threshold

Good OSSD ON

Every couple over the lower light reception

threshold and one couple over the upper

light reception threshold OSSD ON

Every couple over the upper light reception

threshold Excellent OSSD ON

2TLC172298M0201 9 www.abb.com/jokabsafety

2015-09-15

Display and diagnostic functions

Display Alignment status Alignment quality

Every couple over the lower light reception threshold

and no couple over the upper light reception

threshold

Min.

Every couple over the lower light reception threshold

and one couple over the upper light reception

threshold

Every couple over the upper light reception threshold Excellent

Display Status Description Action

Interlock Detection zone free.

OSSD outputs off. Push the RESET button to return to

OSSD ON.

Interlock Beam(s) interrupted.

OSSD outputs off. Remove the object from the detection

zone and push the RESET button.

OSSD ON OSSD outputs on.

OSSD OFF OSSD outputs off.

Normal operation

mode,

OSSD OFF,

interlock

EDM function activated.

Normal operation

mode,

OSSD OFF,

interlock

EDM function deactivated.

OSSD OFF,

interlock Override function ready to

be activated

Activate the Override function

according to paragraph “Override” of

the instruction manual.

Error mode OSSD error, one or both.

OSSD outputs off.

Check the wiring and connections of

the OSSD outputs. Make sure that

there is no short-circuit between them

or with the supply voltage.

Then Acknowledge.

If the error persists, contact your

ABB Jokab Safety representative.

2TLC172298M0201 10 www.abb.com/jokabsafety

2015-09-15

Autres manuels pour Orion3 Extended

Table des matières

Langues :

Autres manuels ABB Capteur de sécurité

ABB

ABB Eden OSSD Manuel utilisateur

ABB

ABB AP10X/1 Manuel utilisateur

ABB

ABB Orion3 Extended Manuel utilisateur

ABB

ABB Adam DYN-Info M12-5 Manuel utilisateur

ABB

ABB Busch-Watchdog 70 MasterLINE Manuel utilisateur

ABB

ABB Elos Series Manuel utilisateur

ABB

ABB Orion1 Base Manuel utilisateur

ABB

ABB Busch Watchdog 6131 102-500 PM/A Series Manuel utilisateur

ABB

ABB Busch-Wachter Presents 6131-74-101-500 Manuel utilisateur

ABB

ABB ret650 Guide de démarrage rapide

ABB

ABB 2CSYD0103M Manuel utilisateur

ABB

ABB MSA-F-1.1.1-***-WL series Manuel du produit

ABB

ABB VD Series Mode d’emploi

ABB

ABB Stanilite Economy exit LED - slide connect... Manuel utilisateur

ABB

ABB Stanilite Standard Manuel utilisateur

ABB

ABB NIESSEN N9611.71 Manuel d'exploitation et d'entretien

ABB

ABB JSHD4 Manuel utilisateur

ABB

ABB Busch E-contact Guide de l'utilisateur

ABB

ABB Busch-Watchdog 6747-500 AGM Series Manuel utilisateur

ABB

ABB Busch Watchdog Prasenz EIB 6131-102-500... Manuel utilisateur

ABB

ABB i-bus EIB Series Manuel utilisateur

ABB

ABB Busch Watchdog Alarmtech 220 Manuel utilisateur

ABB

ABB Orion3 Extended Manuel utilisateur

ABB

ABB Stanilite Series Manuel utilisateur

Manuels Capteur de sécurité populaires d'autres marques

THORLABS

THORLABS PDA10JT Manuel utilisateur

Waeco

Waeco UV-DETECT Manuel utilisateur

Intermatic

Intermatic IOS-DSIMF Manuel utilisateur

urmet domus

urmet domus 1083 Manuel utilisateur

Siemens

Siemens AZL66 Series Manuel utilisateur

BTI

BTI Profiline Multi Finder Manuel utilisateur

Challenger

Challenger SL01 Manuel utilisateur

DMP Electronics

DMP Electronics 1122INT Manuel utilisateur

Rielta

Rielta Ladoga MK-RK Manuel utilisateur

Mirion Technologies

Mirion Technologies ACCURAD PRD Manuel utilisateur

Bosch

Bosch DS835 Manuel utilisateur

DBI SALA

DBI SALA EZ Stop Manuel de l'opérateur

Lamptime

Lamptime ST05C Manuel utilisateur

Ubiquiti

Ubiquiti MFI-MSC Manuel utilisateur

Subsite

Subsite 910R Instructions d'installation

Satel

Satel OPAL Pro Manuel utilisateur

Aleph

Aleph XC-1XTEU Manuel utilisateur

Pima

Pima LARIS QUAD Manuel utilisateur