Aaeon AEC-6613 Manuel utilisateur

Embedded Controller AEC-6613

AEC-6613

Embedded Controller

Intel

®Atom™ D2700 2.13GHz Processor

Dual LAN, 4 USB2.0, 4 COM, 1 VGA

1 Mini Card

AEC-6613 Manual 2nd Ed.

February 2013

Embedded Controller AEC-6613

This document is copyrighted, 2012. All rights are reserved. The

original manufacturer reserves the right to make improvements to

the products described in this manual at any time without notice.

No part of this manual may be reproduced, copied, translated, or

transmitted in any form or by any means without the prior written

permission of the original manufacturer. Information provided in

this manual is intended to be accurate and reliable. However, the

original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result

from its use.

The material in this document is for product information only and is

subject to change without notice. While reasonable efforts have

been made in the preparation of this document to assure its

accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information

contained herein.

AAEON reserves the right to make changes in the product design

without notice to its users.

Embedded Controller AEC-6613

Acknowledgments

All other products’ name or trademarks are properties of their

respective owners.

AMI is a trademark of American Megatrends, Inc.

CompactFlash™is a trademark of the Compact Flash

Association.

Microsoft Windows®is a registered trademark of Microsoft

Corp.

Intel®, Atom™ are trademarks of Intel Corporation.

PC/AT, PS/2, and VGA are trademarks of International

Business Machines Corporation.

All other product names or trademarks are properties of their

respective owners.

Embedded Controller AEC-6613

iii

Packing List

Before you begin operating your PC, please make sure that the

following materials are enclosed:

1 AEC-6613 Embedded Controller

2 Wallmount Brackets

1 Screw Package

1 CD-ROM for manual (in PDF format) and drivers

1 Phoenix Power Connector

1 Heat Spreader

If any of these items should be missing or damaged, please contact

your distributor or sales representative immediately.

Embedded Controller AEC-6613

Safety & Warranty

1. Read these safety instructions carefully.

2. Keep this user's manual for later reference.

3. Disconnect this equipment from anyAC outlet before cleaning. Do

not use liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near

the equipment and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a firm surface during installation. Dropping

it or letting it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the

equipment from overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not

place anything over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the

power source to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or

electrical shock.

13. Never open the equipment. For safety reasons, only qualified

service personnel should open the equipment.

14. If any of the following situations arises, get the equipment

checked by service personnel:

a. The power cord or plug is damaged.

b. Liquid has penetrated into the equipment.

c. The equipment has been exposed to moisture.

Embedded Controller AEC-6613

d. The equipment does not work well, or you cannot get it

to work according to the user’s manual.

e. The equipment has been dropped and damaged.

f. The equipment has obvious signs of breakage.

15. DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT

WHERE THE STORAGE TEMPERATURE IS BELOW -20°C

(-4°F) OR ABOVE 70°C (158°F). IT MAY DAMAGE THE

EQUIPMENT.

FCC

This device complies with Part 15 FCC Rules.

Operation is subject to the following two

conditions: (1) this device may not cause

harmful interference, and (2) this device must

accept any interference received including

interference that may cause undesired

operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the

manufacturer’s instructions and your local government’s recycling or

disposal directives.

Embedded Controller AEC-6613

Below Table for China RoHS Requirements

产品中有毒有害物质或元素名称及含量

AAEON Boxer/ Industrial System

有毒有害物质或元素

部件名称铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件 ×○○○○○

外部信号

连接器及线材 ×○○○○○

外壳 ×○○○○○

中央处理器

与内存 ×○○○○○

硬盘 ×○○○○○

电源 ×○○○○○

O：表示该有毒有害物质在该部件所有均质材料中的含量均在

SJ/T 11363-2006 标准规定的限量要求以下。

X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出

SJ/T 11363-2006 标准规定的限量要求。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、电源为选购品。

Embedded Controller AEC-6613

vii

Chapter 1 General Information

1.1 Introduction................................................................1-2

1.2 Features....................................................................1-3

1.3 Specifications............................................................1-4

Chapter 2 Hardware Installation

2.1 Dimension and I/O of AEC-6613...............................2-2

2.2 Location of Connectors and Jumpers of the Main Board

.........................................................................................2-6

2.3 List of Jumpers..........................................................2-8

2.4 List of Connectors .....................................................2-9

2.5 COM Port 1 Connector..............................................2-11

2.6 COM Port 2 Connector..............................................2-11

2.7 COM Port 3 Connector..............................................2-12

2.8 COM Port 4 Connector..............................................2-12

2.9 Hard Disk Drive Installation.......................................2-13

2.10 SD RAM Installation ..............................................2-17

2.11 DIN Rail Installation.................................................2-23

2.12 Wallmount Installation.............................................2-24

Chapter 3 AMI BIOS Setup

3.1 System Test and Initialization. ..................................3-2

3.2 AMI BIOS Setup........................................................3-3

Chapter 4 Driver Installation

4.1 Installation.................................................................4-3

Embedded Controller AEC-6613

viii

Appendix A Programming The Watchdog Timer

A.1 Programming ........................................................A-2

A.2 ITE8783 Watchdog Timer Initial Program ............A-6

Appendix B I/O Information

B.1 I/O Address Map ..................................................B-2

B.2 1st MB Memory Address Map ...............................B-4

B.3 IRQ Mapping Chart ..............................................B-5

B.4 DMA Channel Assignments .................................B-6

Appendix C AHCI Setting

C.1 Setting AHCI ....................................................... C-2

Embedded Controller AEC-6613

Chapter 1 General Information 1- 1

General

Chapter

Information

Autres manuels pour AEC-6613

Table des matières

Autres manuels Aaeon Matériel informatique

Aaeon

Aaeon HSB-800I Manuel utilisateur

Aaeon

Aaeon HSB-668I Manuel utilisateur

Aaeon

Aaeon BOXER-8120AI Manuel utilisateur

Aaeon

Aaeon SBC-411 Manuel utilisateur

Aaeon

Aaeon UPN-EHLCB Manuel utilisateur

Aaeon

Aaeon EMB-A50M Manuel utilisateur

Aaeon

Aaeon NIM-S13D Manuel utilisateur

Aaeon

Aaeon AEC-6643 Manuel utilisateur

Aaeon

Aaeon UPN-EDGE-EHL01 Manuel utilisateur

Aaeon

Aaeon SBC-598 Manuel utilisateur

Aaeon

Aaeon PFM-620S Manuel utilisateur

Aaeon

Aaeon EPIC-8526 Manuel utilisateur

Aaeon

Aaeon PCM-9150 Manuel utilisateur

Aaeon

Aaeon COM-690T Manuel utilisateur

Aaeon

Aaeon SBC-775 Manuel utilisateur

Aaeon

Aaeon NanoCOM-WHU Manuel utilisateur

Aaeon

Aaeon HSB-660S/I Manuel utilisateur

Aaeon

Aaeon PER-C41L Manuel utilisateur

Aaeon

Aaeon EPIC-BT07-A13 Manuel utilisateur

Aaeon

Aaeon HSB-440I Manuel utilisateur

Aaeon

Aaeon AQ7-LN Manuel utilisateur

Aaeon

Aaeon SBC-456 Manuel utilisateur

Aaeon

Aaeon PFM-336I Manuel utilisateur

Aaeon

Aaeon AEC-6637 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur