A-Trend ATC-5030 Manuel utilisateur

Table of Contents

JUMPER COMPONENT LOCATION DIAGRAM.................A

CHAPTER 1 INTRODUCTION..........................................2

1-1 System features..................................................................3

1-2 S ftware p wer ff c ntr l..................................................4

1-3 Check list f the packing.....................................................5

1-4 Wake-On-LAN………………………………………………….6

CHAPTER 2 INSTALLATION...........................................7

2-1 Installati n pr cedures .......................................................7

2-2 CPU installati n..................................................................8

2-3 System mem ry installati n................................................20

2-4 SRAM installati n................................................................22

2-5 Other jumpers and c nnect rs

descripti n .........................................................................23

2-6 IDE driver installati n..........................................................28

CHAPTER 3 AWARD BIOS SETUP.................................2

3-1 Update BIOS pr cedures....................................................30

3-2 Award system BIOS c nfigurati n setup............................31

APPENDIX A ......................................................................56

CHAPTER 1 INTRODUCTION

Thank f r y u purchasing the ATC-5030 mainb ard, up n purchas-

ing this pr duct fr m the supplier, r any f its distribut rs, vend rs

l cal dealers, y u are qualified f r ne year warranty.

This manual describes t c nfigure the ATC-5030 mainb ard f r

different envir nments. It's an verview f the lay ut and features

f the ATC-5030 mainb ard, and als pr vides inf rmati n f r y u

t change the c nfigurati n r system envir nment.

This manual is divided int tw secti ns :

PART ONE includes page A and tw chapters as f ll wing:

Page A c ntains lay ut diagram f the mainb ard.

Please refer t it when y u c nfigure the system.

Chapter 1 is an verview f the ATC-5030 mainb ard features

and packing items.

Chapter 2 describes h w t upgrade and t change hardware

c nfigurati ns such as mem ry size, CPU type, and

the lists f jumper settings and c nnect rs.

PART TWO includes chapter 3 which c ntains Award BIOS

descripti n..

Chapter 3 is the user's guide f the Award BIOS setup utility and

Flash ROM BIOS. The menu is sh wn in this chapter

will be indicated the value f the default settings.

Y ur system dealer will set up the ATC-5030 mainb ard acc rding

t y ur demand f the c mputer. It means that the current settings f

y ur ATC-5030 mainb ard may n t be the same as the defaults sh wn

in this user's manual. If y u need t change y ur c nfigurati n, please

ask y ur dealer first. Be sure this will n t v id y ur system warranty, r

ask y ur dealer t d it f r y u.

REMARK

Intel® is a registered trademark f Intel C rp rati n.

All ther brands and pr duct names are trademarks registered trademarks f their respective

c mpanies.

1-1 SYSTEM FEATURES

Supp rts Intel Pentium (P54C) CPU perating at 90MHz t

200MHz & Intel Pentium MMXTM 166~233MHz (P55C), AMD

K5, AMD K6, Cyrix 6x86MXTM, 6x86L.

INTEL 430TX PCIset.

Using f ur 72-pin SIMM s ckets, pr vides tw banks f 64-bit

wide path up t 256MB addressing page m de DRAMs.

Using tw 168-pin DIMM s ckets f r 3.3V SDRAM r 3.3V

EDO DRAM m dule.

Built-in 512KB PB SRAM n b ard

Supp rting f ur PCI bus master revisi n 2.1, 5V interface

c mpliant and three 16-bit ISA sl ts.

Dual Master IDE c nnect rs supp rt Ultra UMA/33 (33MB/sec

transfer rate), up t f ur devices in tw channels f r c nnecti n

f high capacity hard disk drive, CD-ROM, tape backup etc..

AT style keyb ard c nnect r and header.

The Ultra Multi-I/O chipset, integrated Keyb ard c ntr ller.

Supp rting Infrared transfer (IrDA TX/RX) c nnecti n.

One FDC p rt supp rts tw devices up t 2.88MB

Tw 16550A fast UARTs c mpatiable serial p rts

One EPP/ECP m de parallel p rt

Supp rting Dual channel USB c nnecti n.

Built-in Switching V ltage Regulat r

Supp rts ACPI P wer Management - OSPM (OS directed

p wer management)

ATX and AT p wer c nnect r

PCB Dimensi n is 220mm x 230mm (8.66" x 9.0") with f ur

layers designed.

1-2 SOFT-OFF CONTROL (option)

The ATC-5030 mainb ard design supp rts S ft-Off C ntr l

feature thr ugh the SMM c de in the BIOS under Wind ws 95,

Wind ws 3.1x, and MS-DOS perati n system envir nment. It

needs t use ATX p wer supply. (please c ntact y ur supplier f r

this pti n)

Firstly, y u sh uld c nnect p wer switch cable (pr vided by ATX

case supplier) t the PS_ON (CONN1) (next t FAN & s cket 7 )

n the ATC-5030 mainb ard.

In Wind ws 95, if y u w uld like t s ft p wer ff the system,

y u just ch se “shutd wn the c mputer ?” in “Shut D wn

Wind ws“ fr m Wind ws 95, then push the P wer Switch* ( n

ATX case), then system will be in s ft ff status directly. If y u

w uld like t restart the system, just press the butt n f the p wer

switch, and the system will be p wer n.

* Default value (P wer management f BIOS screen) is “Instant-

ff‘, y u can change t ’Delay 4 Sec.‘, then y u sh uld push the

P wer Switch at least 4 sec nds therwise the system will be

under SMI m de nly.

In Wind ws 3.1x r MS-DOS, y u sh uld c py the pr gram f

“d wn.c m” (y u can find it in the diskette f IDE driver) int hard

drive. When y u w uld like t p wer ff the system, just run this

“down.com”, then the system will be shutd wn and stay in

standby status.

PS_ON

CONN1 FAN

CPU

N te : If y u will leave y ur system several days, we suggest y u

use hardware mechanical p wer ff t shutd wn y ur system.

1-3 CHECK LIST OF THE PACKING

The ATC-5030 mainb ard c mes securely packed in a durable

b x and shipping cart n. If any f the ab ve items are missing r

damaged, please c ntact y ur supplier.

Each ATC-5030 mainb ard c ntaining:

Q'TY Descripti n

1 Mainb ard : ATC-5030.

1 Diskette : Enhanced IDE driver (3.5").

Award system BIOS driver

Update Utility

1 Cable : Enhanced IDE c nnect r.

1 Cable : F.D.D. c nnect r.

1 Cable : Serial p rt.

1 Cable : Serial/Parallel.

1 Manual : User`s manual.

NOTE : Leave the ATC-5030 mainb ard in its riginal packing until

y u are ready t install it.

1-5 Wake-On-LAN

The rem te Wake-On-LAN m de f perati n is a mechanism

that uses Advanced Micr Device Magic Packet techn l gy t

p wer up a sleeping w rkstati n n the netw rk. This mechanism

is acc mplished when the LAN card receives a specific packet f

inf rmati n, called a Magic Packet, addressed t then de n the

netw rk. F r additi nal pr tecti n, Secure ON is an pti nal

security feature that can be added t the Magic Packet that

requires a passw rd t p wer up the sleeping w rkstati n. When

the LAN card is in rem te Wake-On-LAN m de, main system

p wer can be shut d wn leaving p wer nly f r the LAN card and

auxiliary p wer rec nditi n.

The LAN card perf rms n netw rk activities while in the rem te

Wake-On-LAN m de f perati n-It nly m nit rs the netw rk f r

receipt f a Magic Packet. If a Magic Packet is addressed t the

LAN card n the netw rk, the LAN card wake up the system. If the

Secure ON feature has been enabled, the passw rd added t the

Magic Packet is als verified pri r t waking up the system.

Y u sh uld select the LAN card als supp rt WOL functi n.

WOL has tw pr t c l . That are INTEL and DEC. JP7 is set t

rec ngize y ur LAN card is INTEL r DEC pr t c l.

WOL LAN card will pr vide a 3-pin line t c nnect the WOL

c nnect r n the mainb ard.

WOL JP7

INTEL 1-2

DEC 2-3

CHAPTER 2 INSTALLATION

2-1 INSTALLATION PROCEDURE

Bef re installing the c mputer, please prepare all c mp nents

such as CPU, DRAM; peripherals such as hard disk devices,

keyb ard, CD-ROM drive; and access ries such as cables. Then,

install the system as f ll wing :

1. Plug CPU, heat sink, c ling fan, and DRAM m dules in

the ATC-5030 mainb ard.

2. Set jumpers based n y ur c nfigurati n.

3. Plug add- n cards in PCI/ISA sl ts.

4. C nnect cables t peripherals, p wer supply..

5. Make sure all c mp nents and devices are well

c nnected, turn n the p wer and setup System BIOS

based n y ur c nfigurati n.

6. Install peripheral, add- n card drivers and test them.

7. If all f ab ve pr cedures are success, turn- ff the p wer

then plug all f them int y ur c mputer case.

2-2 CPU INSTALLATION

ATC-5030 supports one Pentium level CPU.

It can aut detect CPU v ltage value either single r dual CPU

v ltage p wer supply type with ut jumper setting. F r installati n,

please n tice CPU pin 1 must align with the ZIF s cket 7 Pin 1

l cati n. Bef re y u install r upgrade y ur CPU, please read

CPU guide fr m CPU manufacturer t make sure the CPU

specificati n. Then ch se the right installati n in secti n 2-2-1

based n y ur CPU type/brand and f ll w the descripti n t setup

DIP Switch (SW1). If y ur CPU is n t in the list f 2-2-1, please

refer t 2-2-2 and 2-2-3 f r installati n. The ATC-5030 mainb ard

pr vides aut -detecti n functi n t detect CPU c re v ltages and

CPU c re v ltages range fr m 2.1V t 3.5V.

2-2-1 CPU TYPE SELECTION

The DIP switch 1 on the ATC-5030 motherboard is to adjust

the CPU internal clocks by using external CPU frequencies

techniques for all brands of the CPU.

A. INTEL PENTIUM CPU (P54C)

※ P54C VRE : 3.400V ~ 3.600V (The f urth line f the mark n the

under-side f the pr cess r c ntains a c de that identifies

the v ltage level type. V is VRE, S is standard. )

※ P54C STD : 3.135V ~ 3.600V (The f urth line f the mark n the

under-side f the pr cess r c ntains a c de that identifies

the v ltage level type. V is VRE, S is standard. )

JP14

JP13

JP12

CPU JP11

JP10

SW1 JP

Intel Pentium 90MHz

INTERNAL CPU

CLOCK

SW1 Ext.x Frq.

90MHz

OFF

1 2 3 4 5 6

60 x 1.5

Intel Pentium 100MHz

INTERNAL CPU

CLOCK

SW1 Ext.x Frq.

100MHz ON

OFF

1 2 3 4 5 6

66 x 1.5

Intel Pentium 120MHz

INTERNAL CPU

CLOCK

SW1 Ext.x Frq.

120MHz ON

OFF

1 2 3 4 5 6

60 x 2.0

Intel Pentium 133MHz

INTERNAL CPU

CLOCK

SW1 Ext.x Frq.

133MHz

OFF

1 2 3 4 5 6

66 x 2.0

Table des matières

Autres manuels A-Trend Carte mère

A-Trend

A-Trend ATC-6130E Manuel utilisateur

A-Trend

A-Trend ATC-6510 Manuel utilisateur

A-Trend

A-Trend ATC-2000 Manuel utilisateur

A-Trend

A-Trend ATC6240V Manuel utilisateur

A-Trend

A-Trend ATC5200M Manuel utilisateur

A-Trend

A-Trend Atc-6240m Instructions de montage

A-Trend

A-Trend ATC-6120 Manuel utilisateur

A-Trend

A-Trend 6220M Manuel utilisateur

A-Trend

A-Trend 6240V Manuel utilisateur

A-Trend

A-Trend ATC-6400 Manuel utilisateur

A-Trend

A-Trend ATC-7300M Manuel utilisateur

A-Trend

A-Trend ATC-6260 Manuel utilisateur

A-Trend

A-Trend 6253M Manuel utilisateur

A-Trend

A-Trend ATC-6320 Manuel utilisateur

A-Trend

A-Trend ATC-6230 Manuel utilisateur

A-Trend

A-Trend 6241 Manuel utilisateur

A-Trend

A-Trend atc-1020 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur