A-Trend ATC-2000 Manuel utilisateur

Table of Contents

JUMPER & CONNECTOR LOCATION DIAGRAM.............A

CHAPTER 1 INTRODUCTION..........................................2

1-1 SYSTEM FEATURES.........................................................3

1-2 CHECK LIST OF THE PACKING........................................4

CHAPTER 2 INSTALLATION...........................................5

2-1 INSTALLATION PROCEDURES .......................................5

2-2 CPU INSTALLATION..........................................................6

2-3 SYSTEM MEMORY INSTALLATION..................................11

2-4 SRAM INSTALLATION.......................................................13

2-5 OTHER JUMPERS AND CONNECTORS

DESCRIPTION ..................................................................14

2-6 IDE DRIVER INSTALLATION.............................................1

CHAPTER 3 AWARD BIOS SETUP.................................20

3-1 UPDATE BIOS PROCEDURES..........................................21

3-2 AWARD SYSTEM BIOS CONFIGURATION SETUP.........22

APPENDIX A ......................................................................46

CHAPTER 1 INTRODUCTION

This manual introduces how to configure the ATC-2000 mainboard for

different environments. It's an overview of the layout and features of the

mainboard, and also rovides information for

you to change the configuration or system environment.

This manual is divided into two sections :

PART ONE includes age A which contain layout diagram of

the mainboard. Please refer it when you configure the system.

PART TWO includes three cha ters as following:

Cha ter 1 is an overview of the mainboard features and acking

contents of the mainboard.

Cha ter 2 describes how to u grade and to change hardware

configurations such as memory size, CPU ty e, and lists of

jum er settings and connectors.

Cha ter 3 is the user's guide of AWARD BIOS setu utility,

and Flash ROM BIOS u date rocedure. The menu showed in

this cha ter are default settings.

Your system dealer will set u the mainboard according to your

demand of com uter. It means that the current settings of your

mainboard's current setting may not be the same as the defaults shown

in this user's manual. If you need to change your

configuration, lease ask your dealer firstly, be sure this will not

against your system warranty. Or ask for your dealer to do it for you.

REMARK

Intel® is a registered trademark of Intel Cor oration.

MS-DOS® is a registered trademark of Microsoft Cor oration.

All other brands and roduct names are trademarks registered trademarks of their res ective

com anies.

1-1 SYSTEM FEATURES

:P54C, P55C Pentium level CPU o erating at 75 MHz to 200MHz with

321- in ZIF socket 7 and scalability to acce t rocessor in the

future.

:INTEL 82430HX PCIset.

:Using four 72- in SIM sockets, rovides two banks of 64-bit wide ath

u to 256MB addressing age mode DRAMs.

:Su orting all ty es of DRAM included ECC (Error Checking and

Correcting) or arity, EDO (Extended Data Out), BEDO (Burst EDO),

or FPM (Fast Page Mode).

:Su orting four PCI bus master revision 2.1, 5V interface com liance

and four 16-bit ISA slots.

:Dual Master IDE connectors su ort u to four devices in two

channels for connection of high ca acity hard disk drive, CD-ROM

drive, ta e backu etc..

:Su orting the USB (Universal Serial Bus) connector.

:"True" Green ower management for CPU sto clock state.

:AT style keyboard connector and PS/2 mouse connector.

:Winbond 83877 high-s eed Multi-I/O chi set:

:Su orting Infrared transfer (IrDA TX/RX) connection.

:One FDC ort su orts two devices u to 2.88MB

:Two 16550A fast UARTs com atiable serial orts

:One EPP/ECP mode arallel ort

:Hardware Dimension is 220mm x 280mm (8.66" x 11.02") with four layers

designed.

1-2 CHECK LIST OF THE PACKIN

The mainboard comes securely acked in a durable box and shi ing

carton. If any of the above items are missed or damaged, lease

contact your su lier.

Each mainboard containing:

Q'TY Descri tion

1 Mainboard : ATC-2000.

1 Diskette : Enhanced IDE driver (3.5").

1 Cable : Enhanced IDE connector.

1 Cable : F.D.D. connector.

1 Cable : Serial ort.

1 Cable : Serial/Parallel.

1 Manual : User`s manual.

NOTE : Leave the mainboard in its original acking until you are ready to

install it.

CHAPTER 2 INSTALLATION

2-1 INSTALLATION PROCEDURE

Before installing the com uter, lease re are all com onents such as

CPU, DRAM; eri herals such as hard disk drive, keyboard, CD-ROM

drive; and accessories such as cables. Then, install the system as following

1. Plug CPU (w/ heat sink and cooling fan), DRAM modules in the

mainboard.

2. Set jum ers based on your configuration.

3. Plug add-on cards in PCI or ISA slots.

4. Connect cables to eri herals, ower su ly..

5. Make sure all com onents and devices are well connected,

turn on the ower and setu System BIOS based on your

configuration.

6. Install eri heral, add-on card drivers and test them.

7. If all of above rocedures are success, turn-off the ower then

lug all of them into your com uter case.

2-2 CPU INSTALLATION

ATC-2000 su orts P54C and P55C ty es of CPUs u to 200MHz. For

installation, lease notice CPU in 1 must align with the ZIF socket 7 Pin 1

location.

In the 2-2-1 describes the jum er setting for each brand of CPU. If your

CPU is not in the list of 2-2-1, lease refer to 2-2-2 and 2-2-3 for installation.

2-2-1 CPU TYPE SELECTION

A. INTEL PENTIUM CPU (P54C)

JP10JP11

1-21-2

CPU Core VoltageVRESTD

JP91-23-4

INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.

75MHz close close 1-2 1-2 50x1.5

90MHz o en close 1-2 1-2 60x1.5

100MHz close o en 1-2 1-2 66x1.5

120MHz o en close 2-3 1-2 60x2.0

133MHz close o en 2-3 1-2 66x2.0

150MHz o en close 2-3 2-3 60x2.5

166MHz close o en 2-3 2-3 66x2.5

STD is ႑standard႑

(The fourth line of the mark on the under-side

of the rocessor contains a code that identifies

the voltage level ty e. V is VRE, S is standard. )

xxxxxxxxx

Sxxxx/SMU

Intel Pentium CPU,

the first letter after

႑/ ႒denotes voltage

ty e.

180MHz o en close 1-2 2-3 60x3.0

200MHz close o en 1-2 2-3 66x3.0

B. INTEL PENTIUM CPU (P55C)

Besides CPU clock setting, for P55C (MMX) CPU you have to set JP10/

JP11/JP12/JP13 based on its CPU I/O voltage, and JP9 based on its

core voltage.

CPU Core Voltage3.52V3.3V2.9V2.8V*2.7V

JP91-23-45-67-89-10

*Currently, Intel P55C is released 2.8V core voltage only.

Please confirm this with your system su lier before you

install P55C CPU.

I/O VOLTA E JP10 JP11 JP12 JP13

VI/O = 3.3V 2-3 2-3 close o en

INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.

166MHz close o en 2-3 2-3 66x2.5

180MHz o en close 1-2 2-3 60x3.0

200MHz close o en 1-2 2-3 66x3.0

JP10

JP11

JP13

JP12

C. Cyrix 6x86 CPU

¡Cyrix 6x86

JP9JP10JP11

1-21-21-2

INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.

P120+ @ 100MHz close close 2-3 1-2 50x2.0

P150+ @ 120MHz o en close 2-3 1-2 60x2.0

P166+ @ 133MHz close o en 2-3 1-2 66x2.0

¡ Cyrix 6x86L CPU

CPU JP9 JP10 JP11 JP12 JP13

Cyrix 6x86L 7-8 2-3 2-3 close o en

INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.

P120+ @ 100MHz close close 2-3 1-2 50x2.0

P133+ @ 110MHz o en o en 2-3 1-2 55x2.0

P150+ @ 120MHz o en close 2-3 1-2 60x2.0

P166+ @ 133MHz close o en 2-3 1-2 66x2.0

D. AMD K5CPU

JP9JP10JP11

1-21-21-2

(Cyrix logo)

6x86-Pxxx+GP

xxxMHz

3.52V(028)

(Cyrix logo)

6x86L-P150+GP

120MHz

2.8V

The bottom line of the mark on the

rocessor contains a code 028 that

identifies the voltage level ty e. If the

code is 016 or others, or no marking then

lease contact your dealer.

The mark on the rocessor contains as

the sam le in the left. The code-name

6x86L is dual voltage mode rocessor, you

should set JP6 to 2-3.

INTERNAL CPU CLOCK JP7 JP8 JP3 JP4 Ext.x Frq.

PR75ABR 75MHz

close close 1-2 1-2 50x1.5

PR90ABQ 90MHz

o en close 1-2 1-2 60x1.5

PR100ABQ 100MHz

close o en 1-2 1-2 66x1.5

PR120ABQ 90MHz

o en close 1-2 1-2 60x1.5

PR133ABQ 100MHz

close o en 1-2 1-2 66x1.5

PR166ABQ

close o en 2-3 2-3 66x2.5

2-2-2 CPU VOLTA E SETTIN

JP9 is used to various CPU core voltage ty es.

CPU CORE VOLTAGE

JP9

INTELSTD3-4

(P54C)VRE1-2

AMD-K5Ô

PR100

AMD-K5-PR133ABQ

100MHz

P54C VRE

Cyrix 6x86

AMD K5

P54C STD

P55C2.8V7-8

Cyrix6x86(028)1-2

Cyrix6x86L7-8

AMDK51-2

2-2-3 CPU CLOCK SETTIN

The following setting is for CPU s eed released later than 2-1-1.

EXTERNAL CPU CLOCK JP7 JP8

50(MHz) close close

55(MHz) o en o en

60(MHz) o en close

66(MHz) close o en

External

CPU Clock :

INTERNAL CPU CLOCK JP3 JP4

INTEL EXTERNAL CLOCK X 1.5 1-2 1-2

INTEL EXTERNAL CLOCK X 2.0 2-3 1-2

INTEL EXTERNAL CLOCK X 2.5 2-3 2-3

INTEL EXTERNAL CLOCK X 3.0 1-2 2-3

Internal

CPU Clock :

2-3 SYSTEM MEMORY INSTALLATION

ATC-2000 rovides four 72- in SIM sockets for system memory

ex ansion from 4MB to 256MB. These four SIMs are arranged to two

banks, Bank0 (SIM 1, 2) and Bank1(SIM 3, 4), lease refer to age A. Each

bank rovides 64-bit wide data ath.

JP7 JP8 JP7 JP8 JP7 JP8 JP7 JP8

50MHz 55Mhz 60MHz 66MHz

JP3 JP4 JP3 JP4 JP3 JP4 JP3 JP4

x1.5 x2.0 x2.5 x3.0

P55C

Cyrix 6x86L

The mainboard acce ts Fast Page Mode DRAM, and EDO Mode

(Extended Data Out) DRAM, with a s eed at least 70 nanosecond. You

should lug DRAM modules into two sockets (same bank) or four sockets

at one time. Each air of modules must be the same size, ty e, and

s eed; no matter single-side or double-side module. Please lug in Bank

0 firstly if you only have 2 modules. The mainboard su orts mixing of

EDO DRAM SIMMs with fast age

mode DRAM SIMMs among different banks; lease lug EDO in Bank 0, if

you only have 2 EDO modules.

If you install more than 64MB DRAM on ATC-2000, and would like to get

more than 64MB cacheable size function, you should lug one 16K8 (or

32K8) TAG RAM into U16A socket, and change BIOS value of ‘L2 Cache

Cacheable Size’ to ‘512MB’. ( refer to the screen of “CMOS SETUP

UTILITY”.; age 32)

¡ System Memory Combinations Options ¡

BANK0 BANK1 Total Memory

SIM 1, 2 SIM 3, 4 SIM 1- 4

2MBx2 - 4MB

- 2MBx2 4MB

4MBx2 - 8MB

- 4MBx2 8MB

8MBx2 - 16MB

- 8MBx2 16MB

4MBx2 4MBx2 16MB

4MBx2 8MBx2 24MB

- continue -

8MBx2 4MBx2 24MB

16MBx2 - 32MB

- 16MBx2 32MB

8MBx2 8MBx2 32MB

4MBx2 16MBx2 40MB

16MBx2 4MBx2 40MB

8MBx2 16MBx2 48MB

16MBx2 8MBx2 48MB

32MBx2 - 64MB

- 32MBx2 64MB

16MBx2 16MBx2 64MB

4MBx2 32MBx2 72MB

32MBx2 4MBx2 72MB

8MBx2 32MBx2 80MB

Table des matières

Autres manuels A-Trend Carte mère

A-Trend

A-Trend ATC-6130E Manuel utilisateur

A-Trend

A-Trend Atc-6240m Instructions de montage

A-Trend

A-Trend atc-1020 Manuel utilisateur

A-Trend

A-Trend ATC-6260 Manuel utilisateur

A-Trend

A-Trend ATC-6320 Manuel utilisateur

A-Trend

A-Trend ATC-6400 Manuel utilisateur

A-Trend

A-Trend 6220M Manuel utilisateur

A-Trend

A-Trend ATC-6230 Manuel utilisateur

A-Trend

A-Trend 6240V Manuel utilisateur

A-Trend

A-Trend ATC5200M Manuel utilisateur

A-Trend

A-Trend ATC-6510 Manuel utilisateur

A-Trend

A-Trend ATC-7300M Manuel utilisateur

A-Trend

A-Trend 6241 Manuel utilisateur

A-Trend

A-Trend 6253M Manuel utilisateur

A-Trend

A-Trend ATC-5030 Manuel utilisateur

A-Trend

A-Trend ATC6240V Manuel utilisateur

A-Trend

A-Trend ATC-6120 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur