3nStar TRM006 Manuel utilisateur
15” Resistive Touch Screen Monitor
USER MANUAL
TRM006
1
Table of Contents
Chapter I: Overview 2
1.1 Safety Information 2
1.2 Electromagnetic Compatibility Statement 3
Chapter II: Installation Guide 3
2.1 Appearance of TRM006 Touch Screen Monitor: 4
2.2 The Rear Panel I/O Signs and Description: 4
Key Function: 5
Chapter III: Instructions for Installation 5
3.1 Touch Screen Driver Installation: 5
Chapter IV: Common Problems and Solutions 15
No display on the screen 15
Characters look too dark or too light 15
The monitor display needs to be adjusted 15
The text on the screen is unclear or blurred 15
Touch panel doesn’t respond 15
2
Chapter I: Overview
Dear Valued Customer,
Thank you for purchasing 3nStar products. We are committed to continuously maintaining the
product quality and providing better after-sales service. In order to take full advantage of our
devices, we recommend reading through this manual before the driver installation.
1.1 Safety Information
●TRM006 is fully compliant with the relevant requirements of the national standard
GB/4943-2001 IT equipment security.
●Make sure the electricity meets the power requirements (such as voltage, frequency)
before installation and power outlet are properly grounded.
●Lightning may damage the product. Unplug the network cable, power cable or any
other conductors during lightning storms.
●Do not unplug the components and connections (except for the USB device) when the
power is on.
●Do not open the cabinet of the product by a non-professional technician.
●Do not leave any item or liquid inside the product. Do not place any objects into the
ventilation holes, it may cause short-circuit of the internal components and may cause
fire or electric shock.
●In accordance with the national standards GB/T9813-2000 microcomputers general
specification, after the computer is below the temperature of 10 ° C, place the machine
in room temperature (10-35 ° C) conditions for more than two hours to avoid damage
from low temperature. In the meantime, please do not remove the casing but allow the
computer to restore the natural temperature. Avoid heating the unit up too fast because
the computer may generate frost and condensation that might damage the electrical
components.
●This unit is in strict compliance with the electrical appliance standards.
●Safe use voltage range: 100V ~ 240V & 50Hz/60Hz.
●Verify that the power outlet is available to connect to a reliable ground circuit.
●Keep the device clean, dry, away from dust, moisture and direct sunlight.
●Do not share the same power outlet with high-power consumption electrical devices.
Keep distance from high level magnetic interference.
●Turn off the power to the monitor after use to extend useful life.
3
●Do not use sharp points with, draw on or cut the touch screen to ensure a normal life
cycle.
●Switch off the power supply before plugging in or unplugging the communication cable
or connecting to an external device.
●Unauthorized and unqualified technicians should not open the machine, or they assume
all risks and may damage the unit.
When any of the following occurs:
●Liquid penetrates into the body of the monitor
●Monitor is accidentally damaged
●Monitor produces a burning smell
●Monitor display is suddenly abnormal or distorted
!!! Disconnect the power supply immediately, unplug the power cord and contact a
qualified service technician to service the unit.
1.2 Electromagnetic Compatibility Statement
●TRM006 is fully compliant with the relevant requirements of the national standards
(GB/9254-1998) “The limits and measurement methods of radio disturbance
characteristics of information technology equipment” for Class B products.
●TRM006 is fully compliant with the relevant requirements of the People's Republic of
China’s national standards of (GB/17625.1-2003) “Electromagnetic Compatibility
Limits for harmonic current emission limits” for Class B products.
4
Chapter II: Installation Guide
2.1 Appearance of TRM006 Touch Screen Monitor:
2.2 The Rear Panel I/O Signs and Description:
A row of the external device connection interface is located at the rear bottom panel of
the monitor, such as: power outlet, Line in, VGA and USB interface, detailed as follows:
●TOUCH USB: this is connected to PC’s USB Ports, used for touch function
●DC In: 12V DC in, power supply for the touch monitor.
●VGA In: This is connected to PC’s VGA output port.
5
Key Function:
●Menu: Press this button to get a pop-up OSD menu, and enter the menu item (function)
highlighted while the OSD menu is activated.
●ON/OFF: Turn the LCD power on and off. When the power is on, the light is showing
green, stand by will be red
●UP: Press this button to increase the value of the function selected or move to the
previous function
●Down: Press this button to decrease the value of the function selected or move to the
previous function
●AUTO/EXIT: Press this button to apply the monitor setting automatically and Exit the
OSD menu
TRM006 touch screen monitor uses a manual handle design which is able to be adjusted within
the range of 0 degrees to 90 degrees to make operation and viewing more comfortable.
Chapter III: Instructions for Installation
3.1 Touch Screen Driver Installation:
Step 1: Open the installer directory on the CD, double-click “Setup.exe”
6
Step 2: Installation begins as the following figure shows. Click Next to proceed to the
next step.
Step 3: Installation in progress
7
Step 4: Click “Install PS/2 interface driver” and click “Next” to proceed with the
installation.
Step 5: For the touch interface RS232, click “Install RS232 interface driver” and click
“Next” to proceed with the installation.
8
Step 6: When choosing the calibrations, select NONE and click “Next” to proceed with
the installation.
Step 7: When installing USB touch, please connect the USB controller and USB cable.
9
Step 8: When using two or more touch screens, please select “Support multi- monitor
system”.
Step 9: Select the destination location to store the driver. The default path is C: \
Program Files \ eGalaxtouch. Use the default path here and click “Next” to
proceed with the installation.
Table des matières
Autres manuels 3nStar écran tactile
Manuels écran tactile populaires d'autres marques
Elecro Engineering
Elecro Engineering Poolsmart Plus Instructions d'installation
Johnson Controls
Johnson Controls IQ4 HUB Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET2270L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems ET1002L Manuel utilisateur
Elo TouchSystems
Elo TouchSystems 3201L Manuel utilisateur
Duratec
Duratec S15 Manuel utilisateur
