3M Multimedia Projector X65 Manuel

Multimedia Projector X65

Operator’s Guide

Thank you for purchasing this liquid crystal projector.

CONTENTS

Page

FEATURES .......................................2

BEFORE USE ...................................2

Contents of Package ..............................2

Part Names.............................................3

Loading the Batteries..............................5

INSTALLATION ................................6

Installation of the Projector and Screen

........6

Angle Adjustment ...................................6

Cabling ...................................................7

Power Connection ..................................8

Example of System Setup ......................8

Plug & Play.............................................8

OPERATIONS...................................9

Power ON ..................................................9

Power OFF

..............................................9

Basic Operation....................................10

Setup Menu ..........................................12

Input Menu............................................13

Image Menu..........................................14

Options Menu .......................................15

No Signal Menu....................................16

MAINTENANCE ..............................17

Lamp.....................................................17

Air Filter ................................................19

Other Maintenance...............................19

Page

TROUBLESHOOTING ....................20

OSD Message ......................................20

Indicators Message ..............................21

Symptom ..............................................22

SPECIFICATIONS...........................23

ACCESSORIES...............................24

.......................................................................................

TABLES

Table 1. Installation Reference.................6

Table 2. Cabling .......................................7

Table 3. Basic Operation ........................10

Table 4. Setup Menu ..............................12

Table 5. Input Menu................................13

Table 6. Image Menu..............................14

Table 7. Options Menu ...........................15

Table 8. No Signal Menu........................16

Table 9. OSD Message ..........................20

Table 10. IndicatorsMessage ................21

Table 11. Symptom ................................22

Table 12. Specifications .........................23

.......................................................................................

For "TECHNICAL" , see the end of this

manual.

• The information in this manual is sub

NOTE

CAUTION

2© 3M 2004. 3M™ Multimedia Projector X65

FEATURES

This liquid crystal projector is used to project various computer signals as well as NTSC / PAL /

SECAM video signals onto a screen. Little space is required for installation and large images can

easily be realized.

Outstanding Brightness

The UHB lamp and high-efficiency optical system assure a high level of brightness.

Partial Magnification Function

Interesting parts of images can be magnified for closer viewing.

Distortion Correction Function

Distortion-free images are quickly available.

Extra-low Noise Function

Acoustic noise level from the unit can be reduced.

BEFORE USE

Contents of Package

Make sure all of the following items are included in the package. If anything is missing, please

contact your dealer.

•Keep the original packing material for future reshipment.

NOTE

Projector

STANDBY/ON

LASER

BLANK

RGB

VIDEO

AUTO

MENU SELECT

KEYSTONE

RESET

FREEZE

PinP

MAGNIFY

POSITION

OFF

VOLUME

MUTE

Remote Control

Transmitter

Batteries

for Remote Control

Transmitter

Power Cord

(US, UK, Europe)

VGA Cable Component Video

Cable

(with green lead)

X65

Multimedia Projector

Product Safety Guide

3MMP8765

Stereo Mini-Cable

Video/Audio

Cable

(with white lead)

S-Video

Cable

Mouse Cable

(PS/2, Serial)

X65 Projecteur multimedia - Guide de Sécurité de Produit

X65 Multimedia-Projektor - Sicherheitsanleitung des Geräts

X65 Proyector de Multimedia - Guiá de Seguridad del Producto

X65 Proiettore Multimediale - Guida di Sicurezza del Prodotto

X65 Multimedia Projector -Veiligheidsgids op Product

X65 Projector dos Multimedia - Guia da Segurança de Produto

X65 Multimedia-Projector- Bruksanvisning för Produktsäkerhets

X65多媒体投影机 - 产品安全指南

X65 멀티미디어 프로젝터 - 제품 안전 가이드

Product Safety Guide

Warranty

Quick Start Guide

Operator's Guide

BBEE

EEFF

FFOO

OORR

RREE

UUSS

SSEE

((

((cc

ccoo

oonn

nntt

ttii

iinn

nnuu

uuee

eedd

dd))

))

ENGLISH

Part Names

Control Panel (Refer to P.9 "OPERATIONS")

AC Inlet

(to the Power Cord)

Power Switch

Foot Adjuster

Ventilation Openings

(Intake)

Zoom Knob

Focus Ring

Remote Control Sensor

Lens

Foot Adjuster

FRONT/LEFT VIEW OF

THE PROJECTOR

Speaker

Carrying Handle

STANDBY/ON Button

KEYSTONE Button

Foot Adjuster Button

Filter Cover

Air Filter and Intake

for the Cooling Fan

INPUT Button

LAMP Indicator

TEMP Indicator

POWER Indicator

RESET Button

MENU Button

Ventilation Openings

(exhaust)

REAR/RIGHT VIEW OF

THE PROJECTOR

Terminal Panel

(Refer below)

TERMINAL PANEL

S-VIDEO Terminal

COMPONENT VIDEO

Y Terminal

CB/PBTerminal

CR/PRTerminal

VIDEO IN Terminal

AUDIO IN R

Terminal

AUDIO IN L

Terminal

AUDIO IN 1

Terminal

AUDIO IN 2

Terminal

AUDIO OUT

Terminal

Remote Control Sensor

DVI Terminal

RGB IN 1 Terminal

RGB IN 2 Terminal

CONTROL Terminal

RGB OUT Terminal

USB Terminal

AUDIO

COMPONENTVIDEO

RGBIN

RGBOUT CONTROL

DVI

AUDIOOUT USB1 2

VIDEOIN

S-VIDEOIN

( )

Lens Cap

4© 3M 2004. 3M™ Multimedia Projector X65

BBEE

EEFF

FFOO

OORR

RREE

UUSS

SSEE

((

((cc

ccoo

oonn

nntt

ttii

iinn

nnuu

uuee

eedd

dd))

))

Part Names (continued)

STANDBY/ON

LASER

BLANK

RGB

VIDEO

AUTO

MENU SELECT

KEYSTONE

RESET

FREEZE

PinP

MAGNIFY

POSITION

OFF

VOLUME

MUTE

REMOTE CONTROL

TRANSMITTER

(Refer to P.9 "OPERATIONS")

•Keep the remote control transmitter away from children and pets.

•Do not give the remote control transmitter any physical impact. Take care not to drop.

•Do not place the heavy objects on the remote control transmitter.

•Do not wet the remote control transmitter or place it on any wet object.

•Do not place the remote control transmitter close to the cooling fan of the projector.

•Do not disassemble the remote control transmitter.

NOTE

STANDBY/ON Button LASER Button

VIDEO Button

Disk Pad

Used to operate the

mouse shift function and

left click function.

AUTO Button

MENU Button

MENU SELECT Button

Used to click the left

mouse button.

, , , Button

Used to operate the

mouse shift function.

MAGNIFY Button

BLANK Button

RGB Button

MOUSE / RIGHT Button

Used to click the right

mouse button.

RESET Button

Used to click the right

mouse button.

FREEZE Button

MUTE Button

PinP Button

KEYSTONE Button

VOLUME Button

These functions work when the mouse control function is activated. Remember, the POSITION,

BLANK ON and MENU ON functions disable the mouse control function.

WARNING • The laser pointer of the remote control transmitter is used in

place of a finger or rod. Never look directly into the laser beam outlet or point

the laser beam at other people. The laser beam can cause vision problems.

CAUTION • Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous radiation exposure.

POSITION Button

Complies with 21 CFR 1040. 10 and 1040. 11 except for deviations

pursuant to Laser Notice No.50, dated 2001.7.26

SMK CORPORATION

6-5-5 Togoshi Shinagawa-ku, Tokyo, JAPAN 142-8511

MANUFACTURED

Novemver 2001

PLACE OF MANUFACTURER: A

CAUTION

LASER RADIATION-

DO NOT STARE INTO BEAM

MAX. OUTPUT: 1mW

WAVE LENGTH

: 650nm

CLASS2 LASER PRODUCT

LASER RADIATION

IEC60825-1 : 1993+A1:1997

MAX. OUTPUT: 1mW

WAVE LENGTH: 650nm

DO NOT STARE INTO BEAM

CLASS2 LASER PRODUCT

AVOID EXPOSURE-

LASER RADIATIONS IS

EMITTED FROM THIS

APERTURE

BBEE

EEFF

FFOO

OORR

RREE

UUSS

SSEE

((

((cc

ccoo

oonn

nntt

ttii

iinn

nnuu

uuee

eedd

dd))

))

ENGLISH

Loading the Batteries

Install the AA batteries into the remote control

transmitter.

1. Remove the battery cover.

Push the knob while lifting up the battery cover.

2. Load the batteries.

Make sure the plus and minus poles are correctly

oriented.

3. Close the battery cover.

Replace the batteries when remote control transmitter operation becomes difficult.

NOTE

CAUTION •Use only the specified batteries with this remote control

transmitter. Also, do not mix new and old batteries. This could cause

battery cracking or leakage, which could result in fire or personal injury.

•When loading the batteries, make sure the plus and minus terminals are

correctly oriented as indicated in the remote control transmitter. Incorrect

orientation could cause battery cracking or leakage, which could result in

personal injury or pollution of the surrounding environment.

•When you dispose the battery, you should obey the law in the relative area or

country.

•Keep the battery away from children and pets.

•When not to be used for an extended period, remove the batteries from the

remote control transmitter.

6© 3M 2004. 3M™ Multimedia Projector X65

INSTALLATION

Installation of the Projector and Screen

Refer to the drawing and table below for determining the screen size and projection distance.

Top View

Side View

Screen size

[inches (m)]

a[inches (m)]

Min. Max.

40 (1.0) 62 (1.6) 82 (2.1)

60 (1.5) 94 (2.4) 123 (3.1)

80 (2.0) 127 (3.2) 164 (4.2)

100 (2.5) 160 (4.1) 205 (5.2)

120 (3.0) 192 (4.9) 246 (6.3)

150 (3.8) 241 (6.1) 308 (7.8)

200 (5.0) 323 (8.2) 411 (10.4)

Angle Adjustment

Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable

within 0˚to 9˚approximately.

1. Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection

angle.

2. Release the button to lock at the desired angle.

3. Use the foot adjusters for fine adjustment. Do not force the adjuster screws. This could damage

the adjusters or cause the lock to fail.

The projection distances shown in the table below are for

full size (1024 x 768 dots).

a: Distance from the projector to the screen. (±10%)

Table 1. Installation Reference

CAUTION •Install the projector in a suitable environment according to instructions of

the “Product Safety Guide”and this manual.

•When you attachthis unit to a metal mount you must properly ground the fixture;

otherwise, fire or electrical shock can result.

Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the

building using an optional three-core power-supply cord.

•Please basically use liquid crystal projector at the horizontal position.

If you use liquid

crystal projector by the lens up position, the lens down position and the side up position, this

may cause the heat inside to build up and cause damage.

Be especially careful not to install

it with ventilation holes blocked.

•Do not install LCD projector in smoke effected environment. Smoke residue may buildup

on critical parts (i.e.LCD panel, Lens Assy etc.).

CAUTION •Do not release the foot adjuster button unless the projector is being held;

otherwise, the projector could overturn or fingers could get caught and cause personal

injury.

Foot Adjusters Press the foot

adjuster button

ENGLISH

IINN

NNSS

SSTT

TTAA

AALL

LLLL

LLAA

AATT

TTII

IIOO

OONN

((

((cc

ccoo

oonn

nntt

ttii

iinn

nnuu

uuee

eedd

dd))

))

•Before connecting, read instruction manuals of the devices to be connected, and make sure that the

projector is compatible with the device.

•Secure the screws on the connectors and tighten.

•For some RGB input modes, the optional Mac adapter is necessary.

•To select the DVI input, the comuter may need some settings. See the manuals of the computer for details.

•Some computers may have multiple display screen modes. Use of some of these modes will not be possible

with this projector.

•Refer to the “TECHNICAL”section for the pin assignment of connectors and RS-232C communication data.

•When the DVI terminal is used, the RGB OUT terminal may not function.

NOTE

CAUTION •Incorrect connecting could result in fire or electrical shock.

Please read this manual and the “Product Safety Guide”.

•Before connecting, turn off all devices to be connected. This is not needed for a

USB device because USB is plug & play capable.

•The cables may have to be used with the core set to the projector side. Use the

cables which are included with the projector or specified.

Cabling

Refer to the table below for connecting each terminal of the projector to adevice.

Table 2. Cabling

Function Terminal Cable

RGB input RGB IN 1 VGA cable

with D-sub 15-pin shrink jack

and inch thread screws

RGB IN 2

RGB output RGB OUT

DVI input DVI DVI cable with inch thread screws

Audio input

(from the computer)

AUDIO IN 1

(interlocked with RGB IN 1 or DVI)

Audio cable with stereo mini jack

AUDIO IN 2

(interlocked with RGB IN 2)

PS/2 mouse control

CONTROL

PS/2 mouse cable

ADB mouse control ADB mouse cable

Serial mouse control Serial mouse cable

RS-232C communication RS-232C cable

USB mouse control USB USB cable

S-video input S-VIDEO IN S-video cable

with mini DIN 4-pin jack

Video input VIDEO IN Video/Audio cable

Component video input

COMPONENT VIDEO Y

Component video cableCOMPONENT VIDEO CB/PB

COMPONENT VIDEO CR/PR

Audio input

(from video equipment)

AUDIO IN L Video/Audio cable

or Audio cable with RCA jack

AUDIO IN R

Audio output AUDIO OUT Audio cable with stereo mini jack

VIDEO IN

S-VIDEO IN

AUDIO

AUDIO OUT1

2USB

RGB IN

RGB OUT CONTROL

DVI

CR/PR

COMPONENT VIDEO

CB/PBY

AUDIO

Example of System Setup

S-Video Tape

Recorder Computer

(notebook type)

•When connecting with a notebook computer, set the proper RGB external image output

(setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of

the notebook for more information.

Plug & Play

This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer

that is VESA DDC (Display Data Channel) compatible.

Please use this function by connecting the VGA cable with RGB IN 1 terminal (DDC 1/2B

compatible), or by connecting a DVI cable with DVI terminal (DDC 2B compatible).

Plug & play may not operate by other connections.

•Plug & play is a system configured with peripheral equipment including a computer,

display and an operating system.

•This projector is recognized as a plug & play monitor. Use the standard display drivers.

•Plug & play may not operate by the computer to connect. Use the RGB IN 2 terminal if plug &

play does not operate correctly.

NOTE

IINN

NNSS

SSTT

TTAA

AALL

LLLL

LLAA

AATT

TTII

IIOO

OONN

((

((cc

ccoo

oonn

nntt

ttii

iinn

nnuu

uuee

eedd

dd))

))

Power Connection

Use the correct power cord depending on the power outlet to be used.

Connect the AC inlet of the projector to the power outlet firmly by the power cord.

AC Inlet

Power Cord

Power

outlet

Speaker with

amplifier

Display

Monitor

CAUTION •Be carful in handling the power

cord according to instructions of the "Product

Safety Guide" and this manual.

•Connect the power cord firmly. Avoid using a

loose, unsound outlet or failed contact.

Computer

(desktop type)

DVD Player

ENGLISH

OPERATIONS

Power ON

1. Check that the power cord is connected correctly.

2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned to

orange.

3. Press the STANDBY/ON button on the control panel or the remote control transmitter.

Warm-up begins and the POWER indicator blinks in green.

4. The POWER indicator ceases blinking and turns to green when power is on. Remove the lens

cap.

5. Adjust picture size using the zoom knob.

6. Adjust focus using the focus ring .

Power OFF

1. Press the STANDBY/ON button on the control panel or the remote controller. Then,the

message "Power off?" will appear on the screen, and the message will disappear by any operation

or no operation for 5 seconds. During this message indication, press the STANDBY/ON

button again. The projector lamp is extinguished and lamp cooling begins. The POWER indicator

blinks orange during lamp cooling. Pressing the STANDBY/ON button has no effect while

the POWER indicator is blinking.

2. The system assumes the Standby mode when cooling is complete, and the POWER indicator

ceases blinking and changes to orange. Check that the indicator is orange and set the power

switch to [

3. The POWER indicator is extinguished when power is off. Do not forget to attach the lens cap.

STANDBY/ON

LASER

BLANK

RGB

VIDEO

AUTO

MENU SELECT

KEYSTONE

RESET

FREEZE

PinP

MAGNIFY

POSITION

OFF

VOLUME

MUTE

STANDBY/

ON Button

•Except in emergencies, follow the above-mentioned procedure for turning power off.

Incorrect procedure will reduce the life of the projector lamp and LCD panel.

•To prevent any trouble, turn on/off the projector when the computer or video tape recorder is OFF.

Providing a RS-232C cable is connected, turn on the computer before the projector.

•When a projector continues projecting the same image, the image may remain as an afterimage.

Please do not project the image same for a long time.

NOTE

WARNING •Please read this manual, and the “Product Safety Guide”

thoroughly before using the equipment. Always ensure that the equipment is

used safely.

Power Switch Lens Cap

STANDBY/ON Button

POWER Indicator

Zoom Knob

Focus Ring

Autres manuels pour Multimedia Projector X65

Table des matières

Autres manuels 3M Projecteur

3M SCP717 Manuel utilisateur

3M X31i Manuel

3M SCP740 Manuel utilisateur

3M Multimedia Projector MP8790 Manuel utilisateur

3M Multimedia Projector MP8790 Manuel

3M Multimedia Projector MP8749 Manuel

3M Multimedia Projector MP8647 Manuel utilisateur

3M MP8775i Manuel d'instructions

3M PX5 Series Manuel utilisateur

3M X64W - Digital Projector XGA LCD Manuel d'installation et d'exploitation

3M Multimedia Projector MP8610 Manuel utilisateur

3M Digital Projector X30N Manuel

3M Multimedia Projector MP8670 Manuel utilisateur

3M Multimedia Projector X68 Manuel utilisateur

3M 1860 - Plus Overhead Projector Manuel d'exploitation et d'entretien

3M 1810 Guide de configuration

3M Multimedia Projector X80 Manuel utilisateur

3M Digital Projector X30N Manuel

3M Multimedia Projector MP8730 Manuel

3M Digital Projector WX66 Manuel utilisateur

3M Multimedia Projector MP8625 Manuel utilisateur

3M Multimedia Projector S40 Manuel d'installation et d'exploitation

3M DX70 - Digital Projector XGA DLP Manuel

3M Digital Projector X20 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur