3M 1810 Guide de configuration

3M Visual Systems Department OHP Service Documentation

Austin, Texas 78726-9000 78-6970-7536-0

Overhead Projector 1800 Series

Illustrated Parts Breakdown

Mar 2007

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Revision History

Original Issue date: 10/2001

The release date, revision level, pages changed and a description of the modifications are listed below.

Revision Page(s)

Changed Description

10/2001 All pages First edition released

1/2002 Figure 1 Added Light Shield Kit

6/2002 All pages Individual parts combined into modules and kits

8/2002 Figures 5, 8-14 Added Post Handle, Lamp Module kit content, OUS motor, and U.S.

Roll Film Kit.

6/2003 All pages New art and parts listings for kits, modules, and individual parts.

12/2004

All pages

Sec 4, Page 9

Sec 5 pg 10, 11,

Sec 7, pg 14

Sec 8, pg 16, 17

Sec 18,pg 29

Sec 19, pg 31

Appendix A

Figures & tables new layout.

New Arm Kit names and part nbrs.

New Arm section added for S/Ns above 18040828.

Added On/Off Button Kit to art.

New section for clipped-in glass.

New 120V Fan Motor name & part #

New 120V & 230V Fan Motors

New information added.

3/2007 All pages Part numbers updated

Copyrights

The 3M logo, and 3M are a trademarks of 3M Company. All other trademarks or registered trademarks are the property of the

respective company.

Important Notice

All statements, technical information, and recommendations related to the service, repair or operation of 3M products are

believed to be reliable, but the accuracy or completeness is not guaranteed and based on information provided to us. Before

implementation, you must evaluate them and determine if they are suitable for your intended application or situation. You

assume all risks and liability associated with such implementation.

Warranty; Limited Remedy; Limited Liability

3M’s product warranty is stated in its Product Literature available upon request. 3M MAKES NO OTHER

WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated in the Product Literature, your

exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.

Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether

indirect, special, incidental or consequential regardless of the legal theory asserted.

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Table of Contents

REVISION HISTORY...................................................................................................................................................2

TABLE OF CONTENTS................................................................................................................................................3

INTRODUCTION .........................................................................................................................................................4

QUICK REFERENCE PARTS INDEX..............................................................................................................................5

SECTION 0. MACHINE OVERVIEW.............................................................................................................................6

SECTION 1. INVERTED HEAD ASSEMBLY...................................................................................................................7

SECTION 2. OPEN HEAD ASSEMBLY.........................................................................................................................8

SECTION 3. CLOSED HEAD ASSEMBLY.....................................................................................................................9

SECTION 4. ARM ASSEMBLY (SERIAL NUMBER 18040827 AND BELOW,NORTH &SOUTH AMERICA ONLY).................11

SECTION 5. ARM ASSEMBLY (SERIAL NUMBER 18040828 TO 1877398)..................................................................12

SECTION 6. SQUARE POST WITH ARM ASSEMBLY (SERIAL NBRS.1877399 AND ABOVE)..........................................14

SECTION 7. RECTANGULAR POST MOUNTING HARDWARE.......................................................................................15

SECTION 8. TOP COVER ASSEMBLY (WITH TAPED-IN STAGE GLASS).........................................................................17

SECTION 9. TOP COVER ASSEMBLY (WITH CLIPPED-IN STAGE GLASS)......................................................................19

SECTION 10. BASE ASSEMBLY...............................................................................................................................21

SECTION 11. LAMP HOUSING (SINGLE ENX/FXL) ..................................................................................................23

SECTION 12. LAMP HOUSING (DUAL ENX/FXL).....................................................................................................24

SECTION 13. LAMP HOUSING (SINGLE FNT) ..........................................................................................................25

SECTION 14. LAMP HOUSING (DUAL FNT).............................................................................................................26

SECTION 15. LAMP HOUSING (DUAL EVD).............................................................................................................27

SECTION 16. LAMP ASSEMBLY...............................................................................................................................28

SECTION 17. COOLING FAN ASSEMBLY..................................................................................................................29

SECTION 18. ROLL FILM KIT..................................................................................................................................30

SECTION 19. WIRE JUMPERS (ENX AND FXL) .......................................................................................................31

WIRE JUMPERS (ENX AND FXL), CONTINUED..........................................................................................................32

SECTION 20. WIRE JUMPERS (EVD AND FNT).......................................................................................................33

SECTION 21. PLASTIC PARTS KIT ...........................................................................................................................35

SECTION 22. SMALL ELECTRICAL PARTS KIT...........................................................................................................35

APPENDIX A–1800 SPECIFICATIONS.............................................................................................................36

IMPORTANT NOTICE

3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS.

New and reconditioned parts are covered by the same 3M new parts limited warranty.

3M™Overhead Projector 1800 Illustrated Parts Breakdown

MFG Code

Letter (year) Digit (quarter)

K 2001 1 Jan-Mar

L 2002 2 Apr-Jun

M 2003 3 Jul-Sep

A 2004 4 Oct-Dec

C 2005

D 2006

E 2007

C3 = Manufactured during 3rd quarter, 2005.

5 4 3

Introduction

This Illustrated Parts Breakdown (IPB) Manual contains the information necessary to locate and identify

assemblies, sub-assemblies, and specific parts of the 1800 Overhead Projector.

Part Numbers

All components available on a replacement basis are listed with their 3M identification number. The

parts identification list opposite each illustration provides the description adequate to identify

components. If the component is available only as part of the next higher assembly, the description

column provides the next higher assembly description or identification number.

Locating and Identifying a Part

If physical appearance and general location of an item are known:

1. Use the IPB Section Titles to help determine which assembly or sub-assembly includes the item.

2. Refer to the view for the assembly or sub-assembly and locate the item on the exploded view. Match the part

callout number to the corresponding number in the parts list.

3. Parts shown inside a dashed box can only be ordered as an assembly. Any part or mounting hardware shown

outside the box is not included with the assembly.

Machine Identification Plate

The serial number plate for the 1800 is located on the

bottom panel of the projector. The Machine

Identification Plate is divided into the following

components:

1. Product Name: The specific version number of the

projector.

2. Model Number/Alpha Code: The series number of the

projector followed by a three or four character alpha code identifier. The Alpha

Code indicates the design level, specific product

characteristics, power cord or distribution specific to a

country.

3. Lamp: The electrical rating of the lamp.

4. MFG Code: The MFG Code indicates the year and

quarter the projector was built.

5. S/N: The serial number assigned to this projector.

Ordering Parts

When ordering parts, include the following information:

1. Machine model number and serial number.

2. Parts identification number.

3. Part description.

4. Quantity required.

For U.S. retail customers: Call 1-800-650-8429, or fax

1-800-650-9268. Dealers: Refer to Dealers Guide. 3M

Subsidiaries: Contact Export Operations.

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Quick Reference Parts Index

Description (By machine location) Part Number Section No. Item No.

Inverted Singlet Head Module 78-8120-8508-8 1 1

Inverted Triplet Head Module 78-8120-8509-6 1 2

Inverted Mirror Module 78-8120-8498-2 1 3

Light Shield Kit 78-8120-4070-3 1 9

Open Singlet Head Module 78-8120-8507-0 2 1

Open Mirror Module 78-8120-8499-0 2 2

Closed Head Module, Singlet 78-8120-8506-2 3 1

Closed Head Module, Doublet XO-0038-1786-3 3 2

Arm/Basic Post Kit 78-8120-8575-7 4 & 5 1A

Arm/Offset Post Kit 78-8120-8576-5 4 & 5 1B

Square Post with Arm Assembly XO-00381805-5 6 1

Square Post Mounting Hardware Kit 78-8121-4789--6 6 2

Post Pivot Kit 78-8120-8516-1 7 1

Post, Basic Arm 78-8120-8514-6 7 2

Offset Post Pivot Kit 78-8120-8515-3 7 3

Post, Inverted Arm 78-8120-8513-8 7 4

Top Cover Modules (U.S. and A4) See Sections 8 & 9 8 & 9 1A – 1D

Fresnel Lens, Dual Element – 182.5 mm 78-8120-8504-7 8 & 9 6

Fresnel Lens, Dual Element (Inverted Singlet) – 175.3mm 78-8120-8502-1 8 6

On/Off Button Kit, Red 78-8120-8563-3 8 & 9 8A

On/Off Button Kit, Blue 78-8120-8564-1 8 & 9 8B

Base Mirror Module (EVD/FNT) 78-8120-8511-2 10 1

Base Mirror Module (ENX/FXL) 78-8120-8512-0 10 2

Base Module 78-8120-8517-9 10 8

Lamp Housing Kit 78-8120-8520-3 10 9

Transformers See Section 10 10 4A – 4D

Power Cord, 120V (U.S. only) 78-8120-3184-3 10 11

ENX/FXL Single Lamp Socket 78-8120-3197-5 11 1

ENX/FXL Dual Lamp Socket - Right 78-8120-3196-7 12 1

ENX/FXL Dual Lamp Socket - Left 78-8120-4046-3 12 1

FNT Single Lamp Socket 78-8120-4003-4 13 8

FNT Dual Lamp Socket 78-8120-3193-4 14 4

EVD Dual Lamp Socket 78-8120-3193-4 15 4

Lamp, ENX 78-8011-1186-1 11 & 12 4A, 5A

Lamp, FXL 78-8073-7100-6 11 & 12 4B, 5B

Lamp, FNT 78-8054-1175-4 13 & 14 3, 5

Lamp, EVD 78-8079-8791-8 15 5

120V Fan Motor Assembly XO-0038-0869-8 17 4

230V Fan Motor Assembly XO-0038-0868-0 17 5

Roller Kit See Section 18 18 1 – 4

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Section 0. Machine Overview

Head Assembly

(See Sections 1, 2, and 3)

Top Cover Assembly

(See Sections 8 and 9)

Arm Assembly

(See Sections 4 and 5)

Base Assembly

(See Section 10)

ENX/FXL Lamp Housing

(Single and Dual)

(See Sections 11 and 12)

FNT Lamp Housing

(Single and Dual)

(See Sections 13 and 14)

EVD Lamp Housing

(Dual)

(See Section 15)

Lamp Assembly

(See Section 16)

Cooling Fan Assembly

(See Section 17)

Roller Kit

(See Section 18)

Wire Jumpers

(See Sections 19 and 20)

Plastic Parts Kit

(See Section 21)

Electrical Parts Kit

(See Section 22)

Post Mounting Hardware

(See Section 6 and 7)

Open Closed Inverted

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Section 1. Inverted Head Assembly

Inverted Head Assembly Parts List

Item 3M Part Number Description Qty.

1 78-8120-8508-8 Inverted Singlet Head Module 1

2 78-8120-8509-6 Inverted Triplet Head Module 1

3 78-8120-8498-2 Inverted Mirror Module (Includes Mirror, Tape, and Holder) 1

4 78-8120-3158-7 Mount, Inverted Head * 1

5 78-8120-3154-6 Yoke, Triplet, Left * 1

6 78-8120-3155-3 Yoke, Triplet, Right * 1

7 78-8096-5792-3 Lens, Wide Angle (254.78mm) 1

8 78-8097-3693-3 Lens, Triplet (345mm) 1

9 78-8120-4070-3 Light Shield Kit (Optional) 1

*Note:Once current inventory is gone, replacement is entire head assembly.

Light Shield Kit

1,2

Inverted Triplet Head only

Inverted Singlet Head only

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Section 2. Open Head Assembly

Open Head Assembly Parts List

Item 3M Part Number Description Qty.

1 78-8120-8507-0 Open Singlet Head Module 1

2 78-8120-8499-0 Open Mirror Module 1

3 78-8014-8951-5 Lens, Wide Angle, Singlet (293mm) 1

4 78-8120-8565-8 Head Stabilizer Kit 1

Head Stabilizer Kit

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Section 3. Closed Head Assembly

(Singlet Head only)

1, 2

3M™Overhead Projector 1800 Illustrated Parts Breakdown

Closed Head Assembly Parts List

Item 3M Part Number Description Qty.

1 78-8120-8506-2 Closed Head Module, Singlet (Includes Mirror Housing Assy.) 1

2 XO-0038-1786-3 Closed Head Module, Doublet (Includes Mirror Housing Assy.) 1

3 78-8064-1562-2 Housing, Exit Lens 1

4 78-8064-1650-5 Glass, Articulate Head (Singlet) 1

5 78-8014-8812-9 Lens, Articulate 1

6A 78-8064-1602-6 Clamp, Lens Dust Shield, Doublet 1

6B 78-8054-1791-8 Clamp, Lens Dust Shield, Singlet 1

7 78-8064-1643-0 Mount, Lens, Singlet 1

8A 78-8073-2980-6 Lens, Wide Angle (Singlet only) 1

8B 78-8011-1440-2 Lens, Meniscus (Doublet only) 1

9 78-8064-1457-5 Mirror Housing Assembly 1

10 78-8120-3122-3 Cover, Doublet, Articulate 1

11 78-8011-1445-1 Pivot, Rod 1

12 78-8120-3121-5 Bracket, Lens 1

13 78-8014-8817-8 Spring, Tension 1

14 78-8064-1797-4 Shield, Dust 1

15A 78-8064-1596-0 Clamp, Lens, Singlet (Singlet only) 1

15B 78-8064-1595-2 Clamp, Lens (Doublet only) 1

16 78-8064-1646-3 Tubing, Lens 1

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels 3M Projecteur

3M PX5 Series Manuel utilisateur

3M 213 Guide de configuration

3M SCP716 Manuel d'utilisation

3M DMS800 - Digital Media System 800 XGA DLP... Manuel d'installation et d'exploitation

3M S50/X50 Manuel

3M DX70i Manuel utilisateur

3M Multimedia Projector MP8630 Manuel utilisateur

3M 2000 Guide de configuration

3M Digital Projector X64 Manuel utilisateur

3M Multimedia Projector S40 Manuel

3M X21 Manuel

3M 9050 Guide de configuration

3M 4405 Guide de configuration

3M Digital Media Systems 800 Series Manuel utilisateur

3M X56 Manuel utilisateur

3M SCP712 - Super Close Projection System XGA DLP... Manuel utilisateur

3M SCP715 Manuel

3M MP220 Manuel d'installation et d'exploitation

3M MP 8770 Manuel utilisateur

3M Digital Projector X64 Manuel d'utilisation

3M Multimedia Projector MP8620 Manuel

3M X46 Manuel utilisateur

3M Multimedia Projector S50 Manuel utilisateur

3M Multimedia Projector MP8030 Manuel

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur