ZyXEL Communications C3000Z Manuel utilisateur

Quick Start Guide

www.zyxel.com

C3000Z

WiFi-N/AC 2.4G 3x3 /5G 4X4 VDSL2 4-port

Bonding Combo WAN IAD

Version CZD001-4.16.002.0

Edition 1, 04/2017

Default Login Details

LAN IP Address http://192.168.0.1

User Name admin

Password Check the device label

Quick Start Guide

Device Panels

POWER

DSL

INTERNET

ETHERNET

USB SLOT

POWER

RESET

DSL PORT

USB

ETHERNET 1-4

WIFI 2.4G

WAN/LAN

LAN/WAN

PORTS 1-4

WPS

BUTTON

PORT

WIFI 5G

Overview

The Device is a VDSL2 bonding integrated access device (IAD) with a

four-port built-in Ethernet switch and IEEE 802.11ac wireless. The

Device allows wired and wireless clients to safely access the Internet.

Additionally, the Device includes a Gigabit Ethernet LAN port that can

also serve as a WAN connection to support a dual WAN function. The

USB port allows you to connect a USB memory stick or USB hard drive

for storing or sharing files through the network.

Requirements

Make sure you have the following things before you start.

• Internet access - account information provided by your ISP, such as

user name, password, and so on.

• Internet Explorer 8.0 and later versions, with JavaScript enabled, or

Mozilla Firefox 14 and later versions.

Hardware Connections

1. Use a telephone cable to connect your Device’s DSL port to a

telephone jack (or the DSL or modem jack on a splitter if you have

one).

2. ETHERNET: Use an Ethernet cable to connect a computer to a LAN

port for initial configuration and/or Internet access.

3. USB: You can connect a USB memory stick or a USB hard drive for

file sharing. The Device automatically detects the USB device.

Alternatively, use a USB cable (not provided) to connect a USB

printer to this port.

4. POWER: Use the provided power adaptor to connect the POWER

socket to an appropriate power source. Make sure the power at the

outlet is on. Look at the lights on the front panel.

•ThePOWER light blinks while your Device starts up and then stays

solid green once it is ready.

•TheDSL lights are solid green after your Device has a DSL

connection.

•TheINTERNET light turns on when the Device is able to access the

Internet and blinks when the Device is sending or receiving data.

•TheWAN/LAN light is on if the WAN/LAN port is properly connected

and blinks when there is traffic.

• Each ETHERNET light is on if the corresponding LAN port is

properly connected and blinks when there is traffic.

•TheUSB light turns on when there is a USB printer or memory

device is connected to the Device and blinks when transmitting data.

•TheWiFi 2.4G light is green when the wireless LAN is ready and

blinks when there is traffic.

•TheWiFi 5G light is green when the wireless LAN is ready and

blinks when there is traffic.

•TheWPS light is green when WPS is enabled and blinks amber

while WPS is in process.

If the lights do not come on, check your connections and inspect your cables

for damage. If the lights are still off, contact technical support.

Internet Connection Setup

Your Device can automatically detect and configure your Internet

connection once the hardware is connected properly.

Automatic Connection

1. Open your web browser to a website. Wait while your Device tries to

detect your DSL connection to your ISP. This may take a few

minutes.

2. After it detects the connection, the DSL lights show amber on your

Device and the INTERNET light comes on when the Internet is ready

for you to use. If you have a PPPoE connection, you will have to

enter the user name and password provided by your ISP.

3. Go to Set Up a Wireless Network if you wish to configure your

wireless settings.

4. If the automatic connection is not successful, check your connections

and restart the Device. Also, make sure you have entered the user

name and password correctly. If you still cannot access the Internet,

follow the steps in the next section to manually configure the Internet

connection.

Manual Connection

You can also manually log into the Device’s Web Configurator and

configure the Internet connection.

1. In your browser, if the Device does not automatically re-direct you to

the login screen, go to http://192.168.0.1.

2. Enter the default user name admin and password (see the Device’s

label). Click Apply.

If the login screen does not open, make sure you allow web browser pop-up

windows, JavaScripts and Java permissions. Your computer should be also

set to get an IP address automatically from a DHCP server.

3. The main screen appears. Click Quick Setup to configure the

Device’s Internet access.

4. Enter the user name and password provided by your ISP. Click Apply

to finish the configuration.

5. The DSL lights are green on your Device and the INTERNET light

comes on when the Internet is ready for you to use. If you still cannot

access the Internet, contact your ISP.

Set Up a Wireless Network

You can set up a wireless network using the following methods:

Using Wireless Protected Setup (WPS)

Press the WPS button on the Device’s front panel for more than 5

seconds to turn the WPS function on.

Follow these steps to add a WPS-enabled device to the wireless

network using the WPS button.

Set Up a Wireless Network Manually

The wireless LAN on your Device is enabled by default. To add a

wireless client to the network, use the settings found on the bottom panel

of your Device.

Configure wireless devices that you want to connect to the wireless

network to use the same wireless settings as the Device.

The default wireless settings vary for each Device. Refer to the label of

your Device and use the provided information.

Place the devices you

want to connect near one

another.

Press the WPS button on

the Device.

Press the WPS button on

a compatible device

within 2 minutes of

pressing the button on

the Device.

The WPS light on the

Device blinks amber

when connection is in

progress and is solid

green when connected.

WPS

1010

Wall Mounting

The following are dimensions of a screw anchor and M4 tap screw used

for wall mounting. All measurements are in millimeters (mm).

1. Locate a high position on a wall that is free of obstructions. Use a

sturdy wall.

2. For a concrete or brick wall find a drill bit with the same diameter as

the screw anchors. If you do not need the screw anchors, find a drill

bit slightly smaller in diameter than the included screws.

3. Drill the two screw holes in the wall. Make sure the distance between

the centers of the holes is the same as the wall-mount holes.

Be careful to avoid damaging pipes or cables located inside the

wall when drilling holes for the screws.

Table des matières

Autres manuels ZyXEL Communications Modem

ZyXEL Communications

ZyXEL Communications WAH3004 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-600 Series Guide de référence

ZyXEL Communications

ZyXEL Communications OMNI 56K USB MODEM Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 971M Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-871M Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 642 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Comet 336P Manuel utilisateur

ZyXEL Communications

ZyXEL Communications MAX-100 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Omni TA128 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications 56K Plus Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 630 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications XOHM MAX-206M2 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-871H Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 610 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Omni 56K Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-871M Mode d’emploi

ZyXEL Communications

ZyXEL Communications Comet 3356 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 630 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 600 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications U-90E Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Omni TA128 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications XOHM MAX-206M2 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-2602R/RL-DXA Manuel utilisateur

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur