ZyXEL Communications ZyXEL ZyWALL 35 Manuel utilisateur

ZyWALL 35

Internet Security Appliance

Quick Start Guide

Version 3.62

April 2004

ZyWALL 35 Internet Security Appliance

Introducing the ZyWALL

The ZyWALL 35 is the ideal secure gateway for all data passing between the Internet and the LAN. By

integrating NAT, firewall, content filtering, certificates and VPN capability, ZyXEL’s ZyWALL 35 is a

complete security solution that protects your Intranet and efficiently manages data traffic on your network.

The ZyWALL increases network security by adding up to four De-Militarized Zone (DMZ) ports for use

with publicly accessible servers. Dual WAN ports and dial backup enhance reliability. The

PCMCIA/CardBus slot allows you to add a 802.11b/g-compliant wireless LAN. The embedded web

configurator is easy to operate and totally independent of the operating system platform you use.

You should have an Internet account already set up and have been given most of the following information.

Internet Account Information

Your device’s WAN IP Address (if given): __________________

Your device’s WAN Default Gateway (if given): __________________

Your device’s WAN Net Mask (if given): __________________

DNS Server IP Address (if given): Primary _______________, Secondary _______________, Third _______________

Encapsulation: (choose one below)

 Ethernet Service Type: _______________________

User Name: ____________ Password: ____________

 PPTP User Name: ____________ Password: ____________

Your WAN IP Address: ____________ PPTP Server IP Address: ___________

Connection ID (if required): ____________

 PPPoE (PPPoE) Service Name: ____________

User Name: ____________ Password: ____________

Procedure to View a Product’s Certification(s)

1. Go to www.zyxel.com.

2. Select your product from the drop-down list box on the ZyXEL home page to go to that product's page.

3. Select the certification you wish to view from this page.

ZyWALL 35 Internet Security Appliance

1 Hardware Connections

1.1 Front Panel and Connectors

Refer to section 1.3 on how to setup your ZyWALL.

LABEL DESCRIPTION

RESET You only need to use this button if you’ve forgotten the ZyWALL’s password. It returns

the ZyWALL to the factory defaults (password is 1234, LAN IP address 192.168.1.1,

terminal emulation settings as described below etc.; see your User’s Guide for details).

WAN 10/100

1/2

These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover

(automatically adjust to straight-through or crossover Ethernet cable).

LAN/DMZ

10/100

1-4

These ports are auto-negotiating (can connect at 10 or 100Mbps) and auto-crossover

(automatically adjust to straight-through or crossover Ethernet cable).

1.2 Rear Panel and Connectors

LABEL DESCRIPTION

DIAL BACKUP Only connect this port if you want to set up a backup WAN connection; see your User’s

Guide for details.

CONSOLE Only connect this port if you want to configure the ZyWALL using the SMT (System

Management Terminal) via console port; see your User’s Guide for details.

Your computer should have a terminal emulation communications program (such as

HyperTerminal) set to VT100 terminal emulation, no parity, 8 data bits, 1 stop bit, no flow

control and 9600 bps port speed.

ZyWALL 35 Internet Security Appliance

LABEL DESCRIPTION

EXTENSION

CARD SLOT Do not insert or remove a card with the ZyWALL turned on.

Turn off the ZyWALL before inserting or removing an 802.11b/g-compliant wireless LAN

PCMCIA or CardBus card (to avoid damage).

Do not force, bend or twist the wireless LAN card.

POWER

12VDC

Connect the included power adaptor (use only this adaptor) to this power socket.

1.3 Setting Up Your ZyWALL

1. Connect your cable/DSL modem(s) to WAN1 port and/or WAN2 port with the Ethernet cable(s) that

came with your modem(s).

2. Connect computers or hubs to LAN ports with Ethernet cables.

If you configure these ports as DMZ ports in the LAN or DMZ screen through the Web configurator,

connect publicly accessible servers (Web, FTP, etc.) to these ports to make them visible to the outside

world.

ZyWALL 35 Internet Security Appliance

3. Slide the 64-pin connector end of the PCMCIA or CardBus wireless LAN card into the extension card

slot if you want to add a 802.11b/g-compliant wireless LAN.

ZyWALL 35 Internet Security Appliance

4. If you want to set up a backup WAN connection, connect the 9-pin female end of your modem or

Terminal Adaptor (TA) cable to DIAL BACKUP port and the other end to your modem or TA.

5. If you want to configure the ZyWALL using the SMT (System Management Terminal) via CONSOLE

port, connect the 9-pin male end of the console cable to the console port of the ZyWALL and the other

end to a serial port (COM1, COM2 or other COM port) on your computer.

6. After you’ve made the connections, connect the included power adaptor to the power socket and

connect the power adaptor to a power supply (outlet).

The PWR LED turns on green when you connect the power. The SYS LED blinks for about 30 seconds

while performing system testing and then stays on if the testing is successful. The ACT, CARD, WAN

and LAN/DMZ LEDs turn on if the corresponding connections are properly made. Please see section

1.4 for detailed LED descriptions.

ZyWALL 35 Internet Security Appliance

1.4 Front Panel LEDs

LED COLOR STATUS DESCRIPTION

Off The ZyWALL is turned off.

Green On The ZyWALL is turned on.

PWR

Red On The power to the ZyWALL is too low.

Off The ZyWALL is not ready or has failed.

On The ZyWALL is ready and running.

SYS Green

Flashing The ZyWALL is restarting.

Off The backup port is not connected.ACT Green

Flashing The backup port is sending or receiving packets.

Off The wireless LAN is not ready, or has failed.

On The wireless LAN is ready.

CARD Green

Flashing The wireless LAN is sending or receiving packets.

Off The WAN connection is not ready, or has failed.

On The ZyWALL has a successful 10Mbps WAN connection.Green

Flashing The 10M WAN is sending or receiving packets.

On The ZyWALL has a successful 100Mbps WAN connection.

WAN

10/100

Orange

Flashing The 100M WAN is sending or receiving packets.

Off The LAN/DMZ is not connected.

On The ZyWALL has a successful 10Mbps Ethernet connection.Green

Flashing The 10M LAN is sending or receiving packets.

On The ZyWALL has a successful 100Mbps Ethernet connection.

LAN/DMZ

10/100

Orange

Flashing The 100M LAN is sending or receiving packets.

ZyWALL 35 Internet Security Appliance

2 Setting Up Your Computer’s IP Address

Skip this section if your computer is already set up to accept a dynamic IP

address. This is the default for most new computers.

The ZyWALL is already set up to assign your computer an IP address. Use this section to set up your

computer to receive an IP address or assign it a static IP address in the 192.168.1.2 to 192.168.1.254 range

with a subnet mask of 255.255.255.0. This is necessary to ensure that your computer can communicate with

your ZyWALL.

Your computer must have an Ethernet card and TCP/IP installed. TCP/IP should already be installed on

computers using Windows NT/2000/XP, Macintosh OS 7 and later operating systems.

Windows 2000/NT/XP

1. In Windows XP, click Start, Control Panel. In Windows 2000/NT, click Start, Settings, Control Panel.

2. In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3. Right-click Local Area Connection and then click Properties.

4. Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click Properties.

5. The Internet Protocol TCP/IP Properties screen opens (the

General tab in Windows XP).

- To have your computer assigned a dynamic IP address, click

Obtain an IP address automatically.

-To configure a static IP address, click Use the following IP

Address and fill in the IP address (choose one

from192.168.1.2 to 192.168.1.254), Subnet mask

(255.255.255.0), and Default gateway (192.168.1.1) fields.

ZyWALL 35 Internet Security Appliance

6. Click Advanced. Remove any previously installed gateways in

the IP Settings tab and click OK to go back to the Internet

Protocol TCP/IP Properties screen.

7. Click Obtain DNS server address automatically if you do

not know your DNS server IP address(es).

If you know your DNS server IP address(es), click Use the

following DNS server addresses, and type them in the

Preferred DNS server and Alternate DNS server fields.

If you have more than two DNS servers, click Advanced, the

DNS tab and then configure them using Add.

8. Click OK to close the Internet Protocol (TCP/IP) Properties

window.

9. Click OK to close the Local Area Connection Properties

window.

Checking Your Computer’s IP Address

1. In the computer, click Start, (All) Programs, Accessories and then Command Prompt.

2. In the Command Prompt window, type "ipconfig" and then press ENTER.Your computer’s IP address must be in

the correct range (192.168.1.2 to 192.168.1.254) with subnet mask 255.255.255.0 in order to communicate with

the ZyWALL.

Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh computer

operating systems.

3 Configuring Your ZyWALL

Choose one of these methods to access and configure the ZyWALL. This Quick

Start Guide shows you how to use the web configurator wizards only. See your

User’s Guide for background information on all ZyWALL features and SMT

configuration. Click the web configurator online help for screen-specific web help.

 Web Configurator

 SMT (System Management Terminal). Access the SMT via:

o Console port using terminal emulation software

o LAN, WLAN, DMZ or WAN using Telnet

ZyWALL 35 Internet Security Appliance

3.1 Accessing Your ZyWALL Via Web Configurator

1. Launch your web browser. Enter “192.168.1.1” as the web site address.

2. The default password (“1234”) is already in the password field (in non-readable format). Click Login to

proceed to a screen asking you to change your password. Click Reset to revert to the default password

in the password field.

3. It is highly recommended you change the default password! Enter a new password, retype it to confirm

and click Apply; alternatively click Ignore if you do not want to change the password now.

Web site address.

Change default password.

Default password.

Autres manuels pour ZyXEL ZyWALL 35

Table des matières

Autres manuels ZyXEL Communications Porte

ZyXEL Communications

ZyXEL Communications VMG1312-B Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-663HN-51 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications N4100 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications EMG2926-Q10A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-661HW-D Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications p-661hw series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ISG50 Instructions d'installation et d'utilisation

ZyXEL Communications

ZyXEL Communications P-793H V2 - Manuel

ZyXEL Communications

ZyXEL Communications VMG1312-B Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications p-2302rl series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications EX3510-B1 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Unified Security Gateway ZyWALL 300 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyWALL USG100-Plus Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 660H Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL 2WE Manuel utilisateur

ZyXEL Communications

ZyXEL Communications p-2302r series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VMG3625-T20A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 662HW Series Instructions d'installation

ZyXEL Communications

ZyXEL Communications ZyXEL ZyWALL USG-1000 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VSG1435 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VMG4380-B10A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-660HNU-Tx Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-870HW-I1 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NBG-510S Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur

RTA

RTA 460MCBC-N2E Fiche technique