ZyXEL Communications C1000Z Manuel utilisateur

1



C1000Z

802.11n

ireless VDSL2+4-port

Gateway

Quick Start

Version 1

2012

Edition 1

C1000Z Quick Start Guide



2



Overview

The C1000Z isa wireless VDSL router with a four-port buil

-in switch.

his Quick Start Guide shows you how to use the C1000Z to connect to

the Internet and how to configure the device settings to connect

wirelessly.

See your User’s Guide for background information on all features.

Quick Login Information

LAN IP address http://192.168.0.1

default administrator password Check back label

Note: The device is designed to allow both vertical and wall

mounted usage.

C1000Z Quick Start Guide



3



If you want to mount this product onto the wall, please follow below

step.

Step 1: use screws (Dimension:4.0mm) fix bracket into the wall

Step 2: put equipment mount on bracket

C1000Z Quick Start Guide



4



Hardware

Connections

1 DSL: Use the gray telephone wire to connect your C1000Z’s DSL port to

a telephone jack (or to the modem port on a splitter if you are using

one).

2 ETHERNET: Use the yellow Ethernet cable to connect a computer to an

ETHERNET port for initial con

iguration and/or Internet access.

3 POWER: Use the included power adaptor to connect an appropriate

power source to the POWER socket. Make sure the power source is on.

4 Push in the POWER button.

5 Look at the lights on the front panel.

• The POWER light blinks while your C1000Z starts up and stays on once

it is ready.

• Each ETHERNET light stays on if the corresponding ETHERNET port is

properly connected and blinks when there is traffic.

• The DSL light is on when the C1000Z has a DSL connection.

• The INTERNET light is on when you are able to access the Internet and

blinks when the C1000Z

Is sending or receiving data.

ait a couple of minutes while your device

checks the connection.

If any of these lights are not on, check your connections and inspect

your cables for damage. If the lights are still off, contact your local

C1000Z Quick Start Guide



5



vendor.

Internet Connection

Setup: Automatic

Use this section to have your C1000Z au

oma

ically detect and set up

your Internet connec

ion.

1 Open your web browser to a website.

ait while your C1000Z tries to

detect your DSL connection to your ISP. This may take a few minutes.

2 After it detects the connection, the DSL light shows green on your

device and the Internet light comes on when the Internet is ready for you

to use. If you have a PPPoE connec

ion, you will have to enter your user

name and password.

3 Go to section 3 if you wish to configure your wireless se

ings.

4 If you do not see the connection test screen, or the connection

test is not success

ul , follow the instructions i n the screen below, or

check your connections and restart the C1000Z. If you still cannot

access the Internet, follow the steps in section 3.

Configuring your

Wireless

Settings

To create a wireless network, the C1000Z and your wireless computer

must all use the same SSID (network name), channel and security

C1000Z Quick Start Guide



6



settings.

If you do not set wireless security then anyone within range could use

your C1000Z to access your network and the Internet.

Choose

PA-PSK wireless security if your wireless device supports it

as it is stronger than

EP. Otherwise choose

EP.

1 Select Active and click Next to continue. It is s

rongly recommended

that Enable OTIST is NOT selected.

See section 7 for more information.

2Configure your wireless settings in the screen. Click Next.

3 If you select either WEP or WPA-PSK security (recommended), then

follow the directions to enter the appropriate key. Click Next to continue

and Apply to save your wireless LAN settings.

4 Check your configuration and write down your wireless LAN settings for

later use. Click Finish to complete and save the wizard setup.

5 Your Internet is ready for you to use. Open your browser and navigate

to your favorite website.

Internet Connection

SetupUsing

Advanced

Settings

Use

his section to set up your Internet connection manually if you do not

C1000Z Quick Start Guide



7



see the ISP

arameters for Internet

Access screen when you run the wizard (see section 4, step 4).

1 Login again. (Follow steps 1 to 5 in section 3.)

2 Select Go to Advanced setup. Then, click Apply.

3 The Status screen appears. Click Network > WAN in the navigation

panel on the left of the screen.

4 Enter the in

ormation exactly as provided by your ISP. Click Apply.

5 If you still cannot access the Internet, see Troubleshooting and/or

contact your Internet Service Provider

(ISP) for assistance.

Troubleshooting

1 If you cannot access the web configurator,

• Your computer may be set to use a static IP address in a different subnet

from the ZyXEL device. See the appendix in the User’s Guide for

information on setting up your IP address.

• If you are using Internet Explorer in

indows XP or

indows Server

2003, make sure you allow pop-up windows, JavaScripts and Java

permissions or set the Internet security level lower than High in Internet

Explorer (i n Internet Explorer, click Tools > Internet Options > Security >

Custom Level...). See the appendix in the User’s Guide for more

C1000Z Quick Start Guide



8



information.

2 If you cannot access the Internet when your computer is connected to

the ETHERNET port, follow these steps.

A) Check the lights on the front panel. If they are different from what is

described in section 1, make sure the C1000Z is correc

ly connected.

(See section 1.) If the lights are still different, turn off the device, wait a

few seconds, and turn it on again.

B) Check you have correctly entered the information your ISP gave you.

For example, if your account has a user name and password, make sure

you type it correctly. In addition, if you are not sure which encapsula

ion

your ISP uses, contact your ISP. If your ISP did not give you Internet

connec

ion

ormation, follow the steps in section 2.

C) If you are using a new Internet account, contact your ISP to make

sure it is active.

D) If you still have problems, see Troubleshooting in the User’s Guide.

If you cannot access the Internet after you take the steps above, either try

the following or contact your ISP:

E) Turn your C1000Z off and on. Open your Internet browser if it is not

already open.

Let the C1000Z complete the DSL connection test (this may take several

minutes). See section 2 for details.

If the test is successful, check whether you can access the Internet.

C1000Z Quick Start Guide



9



If you still cannot access the Internet, contact your Internet Service

Provider.

3 If you cannot access the Internet using the wireless network, follow

these steps.

A) On a computer in the wireless network, open your browser, and go to

http://192.168.0.1. If you see the login screen in section 3,

ollow

suggestions A - F above. If you do not, go to the next step.

B) On a computer connected to the C1000Z, make sure your C1000Z and

the computers on your wireless network are using the same wireless

and wireless security settings. See the chapter on

ireless LAN in the

User’s Guide for more in

ormaction.

Viewing Your

Product’s

Certifications

1 Go to www.zyxel.com.

2 Select your product from the drop-down list box on the ZyXEL home

page to go to that product's page.

3 Select the certification you wish to view from this page.

Customer Information

Statement

The information informing the user of his/her and the telephone

C1000Z Quick Start Guide



10



company's rights and obligations is outlined on the following pages. This

ormation will be included in the

inal version of the manual.

Customer Information

1 This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA. On bottom of this equipment is a

label that con

ains, among other in

ormation, a product identifier of

EST C1000Z. If requested, this number must be provided to the

elephone company.

2 If this equipment DL causes harm to the

elephone network, the

telephone company will notify you in advance that temporary

discontinuance of service may be required. But if advance notice iisn’t

practical, the telephone company will notify the cus

omer as soon as

possible.

lso you will be advised of your right to

ile a complaint with

the FCC if you believe it is necessary.

3 The telephone company may make changes in its facilities, equipment,

operations or procedures that

could affect the operation of the equipment. If this happens, the

elephone company will provide advance notice in order for you to make

necessary modification to maintain uninterrupted service.

4 If you experience

rouble with

his equipment, you disconnect it from the

network until the problem has been corrected or until you are sure that

the equipment is not malfunctioning.

Table des matières

Autres manuels ZyXEL Communications Porte

ZyXEL Communications

ZyXEL Communications Prestige 971M Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NSG50 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VMG1312-BX0D Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VMG4380-B10A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ISG50-ISDN Instructions d'installation et d'utilisation

ZyXEL Communications

ZyXEL Communications P-660N-T1A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VMG1312-BX0D Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-660HN-51 - Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VSG1435-B101 - V1.10 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications VMG1312-B10A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PRESTIGE 653HX Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYAIR B-4000 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications SBG3500-N Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyWALL 10 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NSG Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications USG60 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PRESTIGE 660 HW Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications AMG1001-T10A Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 661H Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications Prestige 316 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications p-2302r series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyWALL USG 100 Series Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G.SHDSL.bis 4-port Security Gateway P-793H Manuel utilisateur

ZyXEL Communications

ZyXEL Communications P-660HN series Manuel utilisateur

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur

RTA

RTA 460MCBC-N2E Fiche technique