ZyXEL Communications ZyXEL PLA-401 v3 Manuel utilisateur

www.zyxel.com

PLA-401 v3

ZyXEL Communications Corporation

Powerline Ethernet Adapter

Firmware v3.3.4

Edition 1, 3/2009

CONTENTS

ENGLISH 3

DEUTSCH 11

ESPAÑOL 31

FRANÇAIS 21

ITALIANO 39

SVENSKA 49

NEDERLANDS 57

ENGLISH

Overview

The PLA-401 v3 allows you to set up a powerline network using the

electrical outlets in your home. The figure below shows your PLA-401 v3

(B) connected to a DSL modem (A). You can plug a second PLA-401 v3

access. Use the push-button ENCRYPT feature to set up a secure

HomePlug AV compatible powerline network.

Note: You can connect to the Internet through a router, switch or modem.

The DSL modem is just an example.

This Quick Start Guide shows you how to do the following:

1. Connect the PLA-401 v3 to a Cable/DSL Modem or Router

2. Connect the PLA-401 v3 to a Computer

3. Set Up a HomePlug AV Powerline Network

ENGLISH

Connect the PLA-401 v3 to a

Cable/DSL Modem or Router

1. Use an Ethernet cable to connect the ETHERNET port on the PLA-

401 v3 to an available Ethernet port of your modem, router or switch.

2. Plug the PLA-401 v3 into a power outlet.

3. The power ( ) LED should be on and the

Ethernet ( ) LED should be on or

blinking.

 If none of the LEDs are on, unplug

your device and recheck your

hardware connections.

ENGLISH

Connect the PLA-401 v3 to a

Computer

1. Use an Ethernet cable to connect the ETHERNET port on the PLA-

401 v3 to the Ethernet port on your computer.

2. Plug the PLA-401 v3 into a power outlet.

3. The power ( ) LED should be on and the Ethernet ( ) LED should

be on or blinking.

4. When the PLA-401 v3 detects a connection to another PLA-401 v3

(or another HomePlug AV compatible powerline adapter), the

HomePlug ( ) LEDs turn on.

If you are having trouble setting up your connections, make sure:

• Your outlets are working properly. Unplug the PLA-401 v3 and plug

in another electrical appliance that you know works.

• The Ethernet cables you are using are Category 5 or higher. Most

cables are labeled with their specifications.

• All Ethernet cables are securely connected.

Set Up a HomePlug AV Powerline

Network

There are two ways to secure your powerline network.

• If your other powerline devices have ENCRYPT buttons, go to Set

Up a Powerline Network with ENCRYPT section.

• If your other powerline devices do not have ENCRYPT buttons, see

the User’s Guide for instructions on using the PLA-4xx

Configuration Utility to set up your secure Powerline network.

Set Up a Powerline Network with ENCRYPT

Use the ENCRYPT button to set up a secure connection between two

PLA-401 v3s or with another ENCRYPT-enabled device.

The PLA-401 v3 only works with another device with the same firmware

version as its own.

Use the ENCRYPT feature on two devices at a time.

1. Place the powerline devices close to each other, as you only have two

minutes to press the ENCRYPT buttons on both devices. You can

disconnect the devices from your computer or modem (or other

networking equipment) if you need to, but the powerline devices need

to be plugged into power outlets.

2. Press the ENCRYPT button at the rear of both of your devices for

10~15 seconds. This sets up a random network name.

ENGLISH

3. Press the ENCRYPT buttons at the rear of your powerline devices for

1~2 seconds.

4. While the devices are connecting, the power ( ) and HomePlug

( ) lights blink. Also several times all lights blink at the same time

and the HomePlug ( ) light shows red.

5. Wait for about one minute while your powerline devices connect. The

power ( ) light is steady when the ENCRYPT process times out, the

HomePlug ( ) light is steady if you have a successful connection.

 If the power ( ) light does not blink, you have probably

pressed the ENCRYPT button for too long. Try again,

pressing the ENCRYPT button for 1~2 seconds.

 If the HomePlug ( ) lights on both powerline devices do

not light up, the powerline devices are not connected.

Repeat steps 2and 3in this section. If that doesn’t work,

see the User’s Guide for more suggestions.

2 SEC.

WITHIN

120 SEC. PRESS

PRESS

2 SEC.

6. To add another powerline device (C) to your network, connect it with

one of the powerline devices (Aor B) already connected to your

powerline network (See steps 2and 3in this section).

7. If you disconnected your powerline devices from your computer or

modem (or any other networking product connected to your powerline

device) in step 1 of this section, you can now reconnect them.

 If the HomePlug ( ) light is off, use the PLA-4xx

configuration utility (see the User’s Guide for details) to

detect all other HomePlug AV devices on your power line

network. Try plugging a second HomePlug AV device into an

adjacent socket (to your PLA-401 v3) and see if the

HomePlug ( ) light comes on.

Congratulations! This connects your powerline devices and any products

you have connected to your powerline devices, such as your home

computer or network modem.

A or B

ENGLISH

Procedure to View a Product’s Certification(s)

1. Go to www.zyxel.com.

2. Select your product from the drop-down list

box on the ZyXEL home page to go to that

product's page.

3. Select the certification you wish to view from

this page.

Autres manuels pour ZyXEL PLA-401 v3

Table des matières

Langues :

Autres manuels ZyXEL Communications Adaptateur

ZyXEL Communications

ZyXEL Communications ZyXEL NWD2105 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD3105 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD6602 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyXEL ZyAIR B-220 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA4101 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-402 v3 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD-370N Mode d’emploi

ZyXEL Communications

ZyXEL Communications Wireless LAN USB Adapter ZyAIR 200 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications NWD2705 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-220 V2 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-320H Mode d’emploi

ZyXEL Communications

ZyXEL Communications ZYAIR G-110 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyXEL PLA-401 v3 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications 1 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-401 - V3.0.5 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-210H Mode d’emploi

ZyXEL Communications

ZyXEL Communications PLA-401 v2 Guide de référence

ZyXEL Communications

ZyXEL Communications PLA-407 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications PLA-400 Guide de référence

ZyXEL Communications

ZyXEL Communications G-210H Manuel utilisateur

ZyXEL Communications

ZyXEL Communications WPA-1000 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications G-220F Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZyAIR B-420 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur