Zte MF79U Manuel utilisateur

1

MF79U

Quick Start Guide

ZTE CORPORATION

NO. 55, Hi-tech Road South, Shenzhen, P.R.China

Postcode: 518057

2

Getting to Know Your Device

Appearance

The following figure is for your reference only.

1. Device cap

2. Front cover

3. Indicator light

4. Reset hole

Press and hold for about 3 seconds to restore your device.

5. micro-SIM card slot

6. microSDHC™ card slot

7. USB connector

3

NOTE:

microSDHC logo is a trademark of SD-3C, LLC.

Getting to Know Your Device

Indicator Light

Indicator Status Description

Red

The device is in error status.

 The device is not

registered to the mobile

network.

 There is no micro-SIM

card inserted.

 There is no network

service available.

Green

solid

The device is registered to

the 2G/3G mobile network.

Green

blinking

The device is connected to

the 2G/3G mobile network

and data is being

4

transferred.

Blue solid

The device is registered to

the 4G//LTE network.

Blue

blinking

The device is connected to

the 4G/LTE network and

data is being transferred.

Blue

blinking

WPS is active.

Blue solid Wi-Fi is active.

LED off Wi-Fi is off.

5

Getting to Know Your Device

Connection Scenarios

The device uses your micro-SIM card to access the Internet. It

allows multiple clients to surf on the Internet at the same time.

The following figure is for your reference only.

6

Installing Your Device

1. Open the front cover.

2. Install a micro-SIM card to the micro-SIM card slot.

WARNING!

Your modem does not support SIM cards and nano-SIM cards.

To avoid damage to the modem, do not use those cards or any

card holders.

7

3. Install a microSDHC card to the microSDHC card slot.

4. Close the front cover.

8

9

Connecting to Your Device

Using USB Connector

Insert the device into your computer’s USB port securely. The

operating system automatically detects and identifies your device

and starts the installation wizard.

NOTE:

If the system does not automatically launch installation, you can

click the device installation icon in My Computer > ZTEMODEM

to install the software.

The 4G Mobile Hotspot configuration page will open

automatically, and then your computer will connect to your device

successfully.

Using Wi-Fi

1. Supply power to your device by connecting to your computer

or using other accessories.

2. Ensure that your computer or other client devices have

enabled Wi-Fi, and search for available wireless networks.

NOTE:

Refer to your Wi-Fi-enabled client device manual for further

details on how to search for wireless networks. If you use a

computer, you need to set your computer to obtain an IP address

10

automatically.

3. Select the Wi-Fi name (SSID) of your device, and click

Connect.

4. Enter the Wi-Fi password if necessary, and click OK.

NOTE:

Refer to the chapter Getting to Know the Wi-Fi SSID and

Password to get the default Wi-Fi SSID and password.

5. Wait until the client device is connected to your device

successfully.

Autres manuels pour MF79U

2

Table des matières

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur

Zoom

Zoom 1070 Series Manuel utilisateur

Aztech

Aztech HW831 Manuel utilisateur