ZKTeco SLK21M Manuel utilisateur

Thank you for choosing our product. Please read the instructions carefully

before operation. Follow these instructions to ensure that the product is

functioning properly. The images shown in this manual are for illustrative

purposes only.

For fur the r d eta i ls, ple ase vi s it our Co mpany ’s we b site

www.zkteco.com.

User Manual

SLK21M

Date: July 2022

Doc Version: 1.0

English

Preface

Thank you for choosing our product SLK21M Embedded Optical Fingerprint

Module. Please read this User Manual carefully before use.

We strongly believe that Embedded Optical Fingerprint Module brings you

and your customers an excellent user experience and will uplift your Brand

Image and the Management to a higher level.

However, considering the stability of the product quality or modify the

system settings without professional instructions. For further queries, don't

hesitate to get in touch with the local dealers.

Content

1. Overview.........................................................................................................................1

2. Application Scenarios.................................................................................................2

3. Features...........................................................................................................................3

4. Specifications and Pin Descriptions.....................................................................4

5. Technical Parameters.................................................................................................5

6. Installation on Host (Devices) ................................................................................6

7. Demo Testing Procedure...........................................................................................7

8. Operating Instructions............................................................................................12

Overview

SLK21M is an enhanced version of the SLK20M fingerprint module. It supports a

fingerprint acquisition module with a large capacity and a template storage

expansion function. As a result, its transmission performance is more stable,

and the fingerprint comparison speed is 4 times faster than SLK20M.

Integrating with the excellent fingerprint recognition algorithm, ZKFinger V10.0,

independently developed by ZKTeco, the product can quickly realize offline

extraction and comparison of fingerprint templates on the module, and support

fingerprint template comparison on the host.

It provides a complete SDK, supporting the secondary development integration

of Windows, Android and Linux systems and fulfilling a variety of adaptation

scenarios, such as time & attendance, access control, self-service terminals and

other equipment requiring identity authentication.

Bank Public Security Bureau Education Logistics

Medical Traffic Prison Access Control

Application Scenarios

Note: This Fingerprint Acquisition Module can be integrated into POS machines,

Access Control terminals and Time Attendance terminals, etc.

Features

Light and compact size (thickness of the sensor is only 16mm)

Local encrypted storage of 8,000 fingerprint templates

Offline fingerprint comparison available

Embedded 2-megapixel CMOS, providing clear and high-quality

fingerprint images

Developed based on the Linux operating system, stable and excellent

security performance

Fingerprint comparison speed is 4 times faster than SLK20M with the same

storage capacity

4 5

USB

D-

USB

D+

PIN 1

+5v GND

Shield

6 7

UART UART

Detail

Specifications and Pin Descriptions

Connector Pin 1

Fingerprint Sensor

LED Indicator

Unit: mm

44.25±0.2

36.25±0.2

15.96±0.2

Technical Parameters

USB 2.0

UART (115200bps/TTL 3.3V)

Interface Molex 51021-0700 (7 pin; 1.25mm)

Connector

Hardware

Sensor

Accuracy

Image

Certified By

Dimensions( L * W * H)

0.6 * 0.8 inch/15.24 * 20.32 mm

Capture Dimensions ( W * H )

1.0 GHz, MIPS, FPU, SIMD

CPU

<1%

FRR (False Rejection Rate)

<0.0001%

FAR (False Acceptance Rate)

<1%

Distortion Rate

<2KB

Template Size

ZKFinger V10.0

8,000 templates (max. 10,000)

110ms (1:1); 937ms (1:10,000)

Windows 7 or later version;

Android 5.1 or later version;

Linux

Supported Algorithm

Capacity

Matching Speed

Operating Systems

Power Consumption 5V, 130mA (Active) /5V, 70mA (Standby)

0°C to 45°C / 32°F to 113°F

Operating Temperature

20 to 90% RH (non-condensing)

Operating Humidity

CE, FCC, RoHS

Interface USB2.0

UART (115200bps / T TL 3.3V )

Connector Molex 51021-0700(7-way;1.25mm)

General

1.72 * 1.4 * 0.6 inch/44.68 * 35.56 * 15.24mm

Install the module on the device, as shown below, by tightening the four

screws in the holes and linking the holder to the wire.

Installation on Host (Devices)

Note: In order to ensure good and convenient fingerprint scanning, it is

recommended to install the module on the wall horizontally or at an angle

of 0-45 degrees.

Demo Testing Procedure

It is required that the first time Users need to install the Device Driver

before using the Fingerprint Scanner, and the process is as follows: (If the

Users have already installed the Device Driver of SLK ID series Fingerprint

Scanner, they can directly test without re-installing it.)

Download the Fingerprint Acquisition Module Driver file and then

double-click the setup.exe file to open.

Table des matières

Autres manuels ZKTeco Contrôleurs d'accès IP

ZKTeco

ZKTeco G4 Manuel utilisateur

ZKTeco

ZKTeco Green Label ProFace X Manuel utilisateur

ZKTeco

ZKTeco OP-200 Manuel utilisateur

ZKTeco

ZKTeco SCR-100 Plus Manuel utilisateur

ZKTeco

ZKTeco P160 Manuel utilisateur

ZKTeco

ZKTeco SilkID F21-ID Manuel utilisateur

ZKTeco

ZKTeco Notus Manuel utilisateur

ZKTeco

ZKTeco ProBio Manuel utilisateur

ZKTeco

ZKTeco SpeedFace-VSL Series Manuel utilisateur

ZKTeco

ZKTeco F17 Manuel utilisateur

ZKTeco

ZKTeco C3 Manuel utilisateur

ZKTeco

ZKTeco FR1200 Manuel utilisateur

ZKTeco

ZKTeco ProFace X Manuel utilisateur

ZKTeco

ZKTeco F19 Manuel utilisateur

ZKTeco

ZKTeco SC800 Manuel utilisateur

ZKTeco

ZKTeco F17 Manuel utilisateur

ZKTeco

ZKTeco MA500 Guide de dépannage

ZKTeco

ZKTeco SpeedFace-V3L Manuel utilisateur

ZKTeco

ZKTeco TF1600 ZKTeco Manuel utilisateur

ZKTeco

ZKTeco F18 Manuel utilisateur

ZKTeco

ZKTeco C2-260 Manuel utilisateur

ZKTeco

ZKTeco BR1200 Series Manuel utilisateur

ZKTeco

ZKTeco FA50 Manuel utilisateur

ZKTeco

ZKTeco SA32-E Manuel utilisateur

Manuels Contrôleurs d'accès IP populaires d'autres marques

Jantar

Jantar REX A-1-9 Manuel utilisateur

2N Access Unit Feuille d'instructions

Kedacom

Kedacom KSCA120 Series Manuel utilisateur

H3C

H3C WX2880X Manuel utilisateur

G4S

G4S S870-EX Mode d’emploi

PRASTEL

PRASTEL M2000PE Manuel utilisateur

Allegion

Allegion interflex IF-281 Cylinder Manuel utilisateur

TECOM

TECOM TS1067E Manuel utilisateur

Fermax

Fermax Memokey 100C Guide de l'utilisateur

Fermax

Fermax CITYLINE MEMOKEY Mode d’emploi

Software House

Software House iSTAR Pro 2U RM Mode d’emploi

AKCP

AKCP SP+ Manuel utilisateur

Bpt

Bpt HNA/102 Manuel utilisateur

Civintec

Civintec CV9601T-T-1F Manuel utilisateur

BioMax

BioMax N-X90W Manuel utilisateur

FingerTec

FingerTec s-Kadex Manuel utilisateur

H3C

H3C WX5002ACCESSCONTROLLER Manuel utilisateur

C Prox Ltd

C Prox Ltd DPN-2 Manuel utilisateur