Zavio D510E Instructions d'utilisation
D510E User Manual
0
D510E User Manual
1
D510E CMOS Dome IP Camera
Hardware User Manual
-Contents-
CHAPTER 1. SAFETY INSTRUCTION........................................................................................2
CHAPTER 2. INTRODUCTION.....................................................................................................4
CHAPTER 3. PACKAGE CONTENTS ..........................................................................................5
CHAPTER 4. PHYSICAL DESCRIPTION....................................................................................6
5.1 POWER OVER ETHERNET (POE) CONNECTION......................................................................................................8
5.2WITHOUT POECONNECTION .................................................................................................................................8
CHAPTER 6. APPLICATION..........................................................................................................9
D510E User Manual
2
Hardware User Manual
Chapter 1. Safety Instruction
Before you use this product
This product has been designed with safety in mind. However, the electrical products can cause
fires which may lead to serious body injury if not used properly. To avoid such accidents, be sure to
heed the following.
Legal Caution
Video and audio surveillance can be forbidden by laws that vary from country to country. Check the
laws in your local region before using this product for surveillance purposes.
Don't use the accessories not recommend by the manufacturer
Heed the safety precautions
Be sure to follow the general safety precautions and the “Operation Notice.”
Operation Notice - Operating or storage location
Avoid operating or storing the camera in the following locations:
Extremely hot or cold places
(Operating temperature: 0 °C to + 50 °C [32 °F to 122°F] )
Exposed to direct sunlight for a long time, or close to heating equipment (e.g., near heaters)
Close to water (e.g.,near a bathtub, kitchen sink, laundry tub)
Close to sources of strong magnetism
Close to sources of powerful electromagnetic radiation, such as radios or TV transmitters
Locations subject to strong vibration or shock
D510E User Manual
3
In case of a breakdown
In case of system breakdown, discontinue use and contact your authorized dealer.
In case of abnormal operation
If the unit emits smoke or an unusual smell,
If water or other foreign objects enter the cabinet, or
If you drop the unit or damage the cabinet:1 Disconnect the cable and the connecting cables. 2
Contact your authorized dealer or the store where you purchased the product.
Transportation
When transporting the camera, repack it as originally packed at the factory or in materials of equal
quality.
Ventilation
To prevent heat buildup, do not block air circulation around the device.
Cleaning
Use a soft, dry cloth to clean the external surfaces of the device. Stubborn stains can be
removed using a soft cloth dampened with a small quantity of detergent solution, then wipe dry.
Do not use volatile solvents such as alcohol, benzene or thinners as they may damage the
surface.
D510E User Manual
Chapter 2. Introduction
D510E is a high performance IP Camera with CMOS sensor and adds Power over Ethernet (PoE)
and digital input / output for external alarm or sensor. It also offers incredibly stable and powerful
firmware.
Key Features:
1/4” CMOS Sensor
Maximum Resolution 640x480 (VGA) provides superior image quality
Excellent Image Quality up to flexible 30 fps in all resolution for optimum bandwidth use
Power over Ethernet IEEE 802.3af Class 0 suppliers power to the camera via the network
Digital Input / Output Port for External Alarm & Sensor
Simultaneous MPEG-4 and Motion JPEG video stream
Synchronized Two-way Audio
Optimal Synchronization of Audio and Video
Support Live Video Viewing on Windows Live Messenger (WLM )
Control panel add-in, i.e. snapshot and image setup
Support Mac OS Browser
Support iPhone through Safari Browser
Power over Ethernet IEEE 802.3af Class 0 suppliers power to the camera via the network
Mobile Phone Streaming Live Video through 3GPP / ISMA / RTSP
Mobile Phone Live Image through 2.5 WAP
Multi-level Password Protection for Restricting Camera Access
Built-In Multi-Window Motion Detection (3 detection areas)
Video Buffer makes the Streaming Smoother
UPnP and Bonjour for Fast and Easy Installation
DDNS Supported
Bundled 16 Channel Surveillance Software
User-friendly & Multi-lingual UI
4
D510E User Manual
Chapter 3. Package Contents
Camera – D510E Dome Network Camera
Quick Installation Guide -To provide brief product information and quick installation and
wireless setting
Software CD - To provide IP Surveillance Software, Intelligence IP Installer, User Manuals, and
Language Packs
Screw Pack - There are two applied screws to fix the camera to a flat surface
Adaptor - 12V DC, max 6W
5
D510E User Manual
Chapter 4. Physical Description
Overview
Power Connector - For connection of 12V DC input.
Audio Out (Green Line) - To support audio out with earphones or speakers for two way
audio
Audio In (Red Line) - To support audio in with Microphone for two way audio
Network Connector - For connection to the Ethernet via RJ-45 standard with PoE.
Network Indicator (Green Light) - Green light will light up after the IP Camera
connected with network and IP Camera completed the boot process.
Network Transmit Indicator (Yellow Light) – Yellow light will light up when the data
is transmitting via internet.
Reset - When the device is empowered, press the Reset Button to reboot the device, or hold
the Reset Button for 10 seconds to set the device settings back to factory default.
I / O Terminal Connector – 1 Input / 1 Output to support External Alarm and Sensor used for
motion detection, event triggering and alarm notification…etc.
6
D510E User Manual
DI / DO Terminal connector diagram
Please refer the following illustration below for connection method.
NO COM D- D+
Ground
Ground
12V
Max. 30W
Switch
Alarm out device
12V
7
D510E User Manual
Chapter 5. Basic Connection
D510E offers Power over Ethernet (PoE) connection. However, you still can use D510E with PoE
or without PoE connection. You can follow the procedure below to connect the IP Camera for both
applications.
5.1 Power over Ethernet (PoE) Connection
1. Connect IP Camera’ Ethernet port to your Hub / Switch / Router supporting PoE
5.2 Without PoE Connection
1. Connect the power adaptor to IP Camera.
2. Connect IP Camera’ Ethernet port to your Hub/ Switch / Router
8
D510E User Manual
Chapter 6. Application
9
Autres manuels pour D510E
1
Table des matières
Autres manuels Zavio Caméra IP
Zavio
Zavio F3101 Manuel utilisateur
Zavio
Zavio B7320 3MP WDR Manuel utilisateur
Zavio
Zavio D6330 Manuel utilisateur
Zavio
Zavio P6210 Manuel utilisateur
Zavio
Zavio N6031 Manuel utilisateur
Zavio
Zavio D5113 Manuel de l'opérateur
Zavio
Zavio F3100 Manuel utilisateur
Zavio
Zavio F312A Instructions d'utilisation
Zavio
Zavio P8220 Manuel utilisateur
Zavio
Zavio B52010 Manuel utilisateur
Zavio
Zavio M510E Manuel utilisateur
Zavio
Zavio B8220 Manuel utilisateur
Zavio
Zavio F7210 Manuel utilisateur
Zavio
Zavio D3100 Manuel utilisateur
Zavio
Zavio F3210 Manuel utilisateur
Zavio
Zavio F1100 Manuel utilisateur
Zavio
Zavio M511E Manuel utilisateur
Zavio
Zavio D5110 Manuel utilisateur
Zavio
Zavio F210A Instructions d'utilisation
Zavio
Zavio F731E 35M Instructions d'utilisation
