Zacuto VCT PRO Manuel utilisateur

VCT PRO INSTRUCTIONS

The VCT Pro baseplate has sleek lines, a comfortable shoulder pad and offers incredible balance. The

red sliding top plate offers easy adjust-ability for lens changes, removing your camera, and balancing

your rig correctly on your shoulder. The rod mount is set back 3” further than on any other VCT style

baseplate providing absolutely essential accessory room under your camera lens for a balanced rig.

Left Loose

Right Tight

Pull knob out

to reposition.

Parts & Features

The VCT Pro is designed to make it easier to keep your rig balanced when changing lenses. Instead of remounting the

camera on the baseplate, simply slide the red plate forward or back by using the ratcheting lever

For shorter lenses, slide the red

plate forward. For longer lenses,

slide the red plate back.

Mounting your camera

to the VCT Pro

Remove red plate from baseplate

by loosening the ratcheting

lever and sliding the red plate out

the back end of the baseplate.

Push in the sliding plate release to

unlock the red plate.

Screw camera to red plate.

Slide red plate back into baseplate.

Making sure to push in the sliding plate release.

X2 15 mm Rods

X1 Rod Mount

X1 1/4”-20 Mounting Screw

X1 3/8”-16 Mounting Screw

X1 Sliding Red Plate

(Quick Release)

X3 Side 1/4”-20

Mounting Holes

X1 Mini Ratcheting Lever

X1 M6 Rosette

X2 Ratcheting Levers

X2 15mm Rear Rod Ports

X1 Sliding Plate Release

X1 VCT Wedge

X1 Tail Hook

Adjusting Rod Mount and Rods

Mounting VCT Pro to VCT-14

(VCT-14 Sold Separately)

Additional Accessories

Adjust rod height by loosening both

front allen screws equally. Slide the rod

mount up or down for desired position

and re-lock allen screws.

Attach rods to VCT Pro by loosening

ratcheting lever, sliding rods into place

and then re-tighten lever.

Remove both allen screws and separate

rod mount with rods from VCT body.

Flip rod mount over from original position.

Align and remount allen screws to VCT

body. Adjust to desired height and

re-lock allen screws.

Pull red lever on VCT-14 to release your

Universal VCT Plate.

Mount VCT Plate to VCT-14 by sliding the

front wedge into front slot of the VCT-14

and the tail hook around the rear knob of

VCT-14. The VCT-14 will click when the

VCT Plate is locked into place

An alternative

mounting method

when using a tripod

without a VCT-14, is to

mount your tripod’s quick release wedge plate

to the wedge on the bottom of the VCT Pro.

Tripod Quick

Release Plate

Flipping Rod Mount

for More Height

Rear Rod Ports

Attach rods to VCT Pro by

loosening ratcheting lever,

sliding rods into place and

then re-tightening lever.

Rosette Mounted Grip

The M6 Rosette can be used to

mount a handgrip like the trigger

grip or other camera speciﬁc grips.

VCT Pro Dock

Remove the Sliding Red Plate and attach to the

VCT Pro Dock when using a tripod, sliders, etc.

Learn more at www.zacuto.com

Z-Rail Half Cage

Mount the 3” Z-Rail to the

side of the VCT Pro. Loosen

ratcheting lever and slide

Half Cage jaws onto Z-Rail.

Re-tighten ratcheting lever

when in desired position.

Table des matières

Autres manuels Zacuto Accessoires pour appareils photo

Zacuto

Zacuto EVF & Z-Finder Recoil Kits Manuel utilisateur

Zacuto

Zacuto Z-Finder Eyecup Mode d’emploi

Zacuto

Zacuto Sony F5/F55 Top Plate Manuel utilisateur

Zacuto

Zacuto DSLR Series Manuel utilisateur

Zacuto

Zacuto Sony A7III, A7RIII, A9 Cage Manuel utilisateur

Zacuto

Zacuto GH5 Rod Support Base Manuel utilisateur

Zacuto

Zacuto 1-EVF-1S Manuel utilisateur

Zacuto

Zacuto Canon Kit Manuel utilisateur

Zacuto

Zacuto Fee-N-G Manuel utilisateur

Zacuto

Zacuto Cine EVF Manuel utilisateur

Zacuto

Zacuto 1-EVF-1S Manuel utilisateur

Zacuto

Zacuto VCT Universal Baseplate Manuel utilisateur

Zacuto

Zacuto FS5 Z-Finder Manuel utilisateur

Zacuto

Zacuto HVX200 Manuel utilisateur

Zacuto

Zacuto Z-Finder Manuel utilisateur

Zacuto

Zacuto Gratical EVF Manuel utilisateur

Zacuto

Zacuto Canon C100 Z-Finder Manuel utilisateur

Zacuto

Zacuto Sony FS7 Recoil Kit Manuel utilisateur

Zacuto

Zacuto 1-EVF-1S Manuel utilisateur

Zacuto

Zacuto Axis Mini Manuel utilisateur

Zacuto

Zacuto Z-Finder Manuel utilisateur

Zacuto

Zacuto EVA1 Z-Finder Manuel utilisateur

Manuels Accessoires pour appareils photo populaires d'autres marques

Viltrox

Viltrox EF-NEX Instructions d'installation

Calumet

Calumet 7100 Series CK7114 Manuel utilisateur

Ropox

Ropox 4Single Series Manuel utilisateur

Cambo

Cambo Wide DS Digital Series Mode d'emploi

Samsung

Samsung SHG-120 Manuel utilisateur

Ryobi

Ryobi BPL-1820 Manuel d'utilisation

Aegis

Aegis ABL-36020P Manuel utilisateur

Pentax

Pentax Data Back Fc Manuel utilisateur

Fantasea

Fantasea EyeGrabber F Series Manuel utilisateur

Honeywell

Honeywell HDZ20HD Manuel utilisateur

EGO

EGO BA1400T Manuel utilisateur

Sima

Sima SRW-62 Manuel utilisateur

Shape

Shape A7SSMKIT Manuel utilisateur

Slide Kamera

Slide Kamera HST-2 Manuel utilisateur

Power works

Power works 2902613 Manuel utilisateur

SES

SES SE-2047-2 Manuel utilisateur

Olympus

Olympus PT-EP05L Manuel utilisateur

Starlite

Starlite OctoDome nxt Manuel utilisateur