Yetter 2966-020A Manuel utilisateur

2966-020A

RESIDUE MANAGER

TWIN ROW PLANTER

OPERATOR’S MANUAL

PART IDENTIFICATION

2565-780_REV_E • 08/2023

YETTER MANUFACTURING CO.

FOUNDED 1930

Colchester, IL 62326-0358

Toll free: 800/447-5777

309/776-3222 (Fax)

Website: www.yetterco.com

E-mail: [email protected]

FOREWORD

You’ve just joined an exclusive but rapidly

growing club.

For our part, we want to welcome you to the

group and thank you for buying a Yetter product.

We hope your new Yetter products will help you

achieve both goals-increase your productivity and

increase your efficiency so that you may generate

more profit.

This operator’s manual has been designed into

four major sections: Foreword, Safety

Precautions, Installation Instructions and Parts

Breakdown.

This SAFETY ALERT SYMBOL

indicates important safety messages in

the manual. When you see this

symbol, be alert to the possibility of

PERSONAL INJURY and carefully

read the message that follows.

The word NOTE is used to convey information

that is out of context with the manual text. It

contains special information such as

specifications, techniques and reference

information of a supplementary nature.

The word IMPORTANT is used in the text when

immediate damage will occur to the machine due

to improper technique or operation. Important will

apply to the same information as specified by

note only of an immediate and urgent nature.

It is the responsibility of the user to read the

operator’s manual and comply with the safe and

correct operating procedure and to lubricate and

maintain the product according to the

maintenance schedule in the operator’s manual.

The user is responsible for inspecting his

machine and for having parts repaired or

replaced when continued use of the product

would cause damage or excessive wear to the

other parts.

It is the user’s responsibility to deliver his

machine to the Yetter dealer who sold him the

product for service or replacement of defective

parts, which are covered by the warranty policy.

If you are unable to understand or follow the

instructions provided in this publication, consult

your local Yetter dealer or contact:

YETTER MANUFACTURING CO.

309/776-4111

800/447-5777

309/776-3222 (FAX)

Website: www.yetterco.com

E-mail: info@yetterco.com

WARRANTY

Yetter Manufacturing warrants all products manufactured and sold by it against defects in material. This

warranty being expressly limited to replacement at the factory of such parts or products as shall appear to

be defective after inspection. This warranty does not obligate the Company to bear cost of labor in

replacement of parts. It is the policy of the Company to make improvements without incurring obligations to

add them to any unit already sold. No warranty is made or authorized to be made, other than herein set

forth. This warranty is in effect for one year after purchase.

DEALER: ________________________________________

Yetter Manufacturing warrants its own products only and cannot be responsible for damages to

equipment on which mounted.

SAFETY

A brief description of signal words that may be used in this manual:

CAUTION: Used as a general reminder of good safety practices or to direct attention to unsafe practices.

WARNING: Denotes a specific potential hazard.

DANGER: Denotes the most serious specific potential hazard.

SAFETY PRECAUTIONS

You can make your farm a safer place to live and work if you observe the safety precautions given. Study

these precautions carefully and insist that those working with you and for you follow them.

Finally, remember this: an accident is usually caused by someone’s carelessness, neglect or oversight.

WARNING

Never clean, lubricate or adjust a machine that is in motion. Always lower or block the implement before

performing service.

If the machine must be serviced in the raised position, jack or block it up to prevent it from accidentally

falling and injuring someone.

Do not allow riders on the tractor or implement.

Use speeds and caution dictated by the terrain being traversed. Do not operate on any slope steep enough

to cause tipping or loss of control.

Be sure all personnel are clear of the immediate area before operating.

Read and understand the operator’s manual and require all other persons who will operate the equipment

to do the same.

Be familiar with all tractor and implement controls and be prepared to stop engine and implements quickly in

an emergency.

CAUTION

Consult your implement and tractor operator’s manual for correct and safe operating practices.

Beware of towed implement width and allow safe clearance.

FAILURE TO HEED MAY RESULT IN PERSONAL INJURY OR DEATH.

BOLT TORQUE

Mounting bolts and hardware

Before operating the Residue Manager for the first time, check to be sure that all

hardware is tight. Check all hardware again after approximately 50 hours of operation

and at the beginning of each planting season.

All hardware used on the Residue Manager is Grade 5 unless otherwise noted. Grade 5

cap screws are marked with three radial lines on the head. If hardware must be replaced,

be sure to replace it with hardware of equal size, strength and thread type. Refer to the

torque values chart when tightening hardware.

Important: Over tightening hardware can cause as much damage as when

under tightening. Tightening hardware beyond the recommended range can

reduce its shock load capacity.

The chart below is a guide for proper torque. Use it unless a specified torque is called out

elsewhere in the manual.

Torque is the force you apply to the wrench handle or the cheater bar, times the length of the

handle or bar.

Use a torque wrench whenever possible.

The following table shows torque in ft. lbs. for coarse thread hardware.

Lubricate all bearings and moving parts as assembled and make certain that they work freely.

WARNING: Never work around the toolbar/implement while in a raised position without using

safety lockups.

CAUTION: The Residue manager attachments are very heavy. Pay extra attention to lifting

techniques while handling and or maneuvering the opener during assembly. Failure to do so may

lead to personal injury.

ASSEMBLY INSTRUCTIONS

Step 1. Attach the Residue Manager Wheel Assembly to Arm Assembly,

torque 180 ft. lbs.

ASSEMBLY INSTRUCTIONS

Step 2. Attach the Residue Manager to the planter row unit using;

3) 12 mm x 45 mm bolts, torque 97 ft/lbs.

OPERATING INSTRUCTIONS

DEPTH

Raise or lower the stem and wheel assembly so the teeth of the wheels are in solid contact with

the residue and lightly touching the soil.

The function of the row cleaner is to sweep aside residue and not move soil. When using pre-

plant incorporated herbicide, the row cleaner depth should be adjusted to minimize soil

disturbance so the cleaner will not reduce the effectiveness of the incorporated herbicide.

ROW CLEANER DO’S AND DON’TS

1. DO NOT move soil, Residue Managers are designed to move crop residue only.

2. DO NOT operate planter at slow speeds, ground speed affects how aggressive the spoke

wheels are; operate at sufficient speed to maintain good residue flow.

3. DO NOT expect 100% of crop residue to be cleared, it is not necessary and would necessitate

engaging the soil. The width of path cleared depends on ground conditions, depth setting

and ground speed.

4. DO expect to see wheels occasionally quit turning, indicates ideal (shallow) setting which is

not moving dirt.

MAINTENANCE

Lubrication

CAUTION: To help prevent serious injury or death to you or others caused by

unexpected movement, service machine on a level surface. Lower machine to

ground or sufficiently lock or block raised machine before servicing. If machine

is connected to tractor, engage parking brake and place transmission in

"PARK", shut off engine and remove key. If machine is detached from tractor,

block wheels and use shop stands to prevent movement.

CAUTION: Do not clean, lubricate, or adjust machine while in motion.

Use grease based on NLGI consistency numbers and the expected air temperature range

during the service interval.

Use a multi-purpose polyurea, water resistant, moderate speed, and NLGI grade #2

grease.

Other greases may be used if they meet the following NLGI Performance

Classification: GC-LB

IMPORTANT:

Some types of grease thickener are not compatible with

others. Consult your grease supplier before mixing different

types of grease.

Alternative Lubricants

Conditions in certain geographical areas may require special lubricants and lubrication

practices which do not appear in the operator's manual. If there are any questions,

consult Yetter Manufacturing Co. to obtain latest information and recommendation.

Storing Lubricants

Your machine can operate at top efficiency only if clean lubricants are used.

Use clean containers to handle all lubricants.

Store them in an area protected from dust, moisture and other contaminants.

MAINTENANCE

Lubrication Symbols

Lubricate with grease at hourly interval indicated on symbol.

Lubrication Intervals

IMPORTANT: The recommended service intervals are based on normal conditions;

severe or unusual conditions may require more frequent lubrication.

Perform each lubrication and service procedure at the beginning and end of each season.

Clean grease fittings before using grease gun, to avoid injecting dirt and grit into the

bearing. Replace any lost or broken fittings immediately. If a fitting fails to take grease,

remove and clean thoroughly, replace fitting if necessary. Also check for failure of

adjoining parts.

Storing the Equipment

Store the machine in an area away from human activity

Store machine in RAISED position.

Install service locks on all wheel cylinders.

At the end of the season, the machine should be thoroughly inspected and prepared for

storage. Repair or replace any worn or damaged components to prevent down time at the

start of the next season. Store machine under cover with all parts in operating condition.

Clean machine thoroughly to remove all dirt, debris and crop residue, which would

hold moisture and cause rusting.

Inspect machine for worn or broken parts. See your Yetter Farm Equipment dealer

during the off-season so that parts or service can be acquired when machine is not

needed in the field.

Lubricate bearings as outlined in the Lubrication section

Paint all parts which are chipped or worn and require repainting.

Store machine in a clean, dry place with the planting unit out of the sun.

If the machine cannot be stored inside, cover with a waterproof tarpaulin and tie

securely in place.

Do not allow children to play on or around the machine

PARTS IDENTIFICATION

2966-020A-L-ST-FW

2966-020A-R-ST-FW

Table des matières

Autres manuels Yetter Matériel agricole

Yetter

Yetter 5000-025B Manuel utilisateur

Yetter

Yetter 2967-003A Manuel utilisateur

Yetter

Yetter Furrow Max 6200-070 Manuel utilisateur

Yetter

Yetter Nutrient Pro 4000 Series Manuel utilisateur

Yetter

Yetter 2999 Mode d’emploi

Yetter

Yetter TITAN 2967-008A Manuel utilisateur

Yetter

Yetter 2967-006A Manuel utilisateur

Yetter

Yetter 5000 SERIES Manuel utilisateur

Yetter

Yetter MAXIMIZER Manuel utilisateur

Yetter

Yetter 5000 SERIES Manuel utilisateur

Yetter

Yetter 2967-081 Manuel utilisateur

Yetter

Yetter 5000-080 Manuel utilisateur

Yetter

Yetter 2968-020B Manuel utilisateur

Yetter

Yetter Systems One Seed Jet II Manuel utilisateur

Yetter

Yetter 5000-005B Manuel utilisateur

Yetter

Yetter 500 Series Manuel utilisateur

Yetter

Yetter 25 AVENGER COULTER Manuel utilisateur

Yetter

Yetter Systems One Seed Jet II Manuel utilisateur

Yetter

Yetter 5000-022B Manuel utilisateur

Yetter

Yetter 2565-980 Manuel utilisateur

Yetter

Yetter 5000 SERIES Manuel utilisateur

Yetter

Yetter 2965 Series Manuel utilisateur

Yetter

Yetter 6200-022 Manuel utilisateur

Yetter

Yetter CAB CONTROL STRIP FRESHENER 2984-050-R Manuel utilisateur

Manuels Matériel agricole populaires d'autres marques

GSi

GSi PNEG-2314 Manuel utilisateur

Checchi & Magli

Checchi & Magli TEXDRIVE Manuel utilisateur

Amazone

Amazone Cenius 4003-2TX Manuel utilisateur

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuel utilisateur

Cima

Cima BLITZ Instructions d'utilisation et d'entretien

Amazone

Amazone CombiDisc 3000 Instructions d'installation

HE-VA

HE-VA Disc-Roller XL Contour Manuel utilisateur

AGT

AGT AGT-SSFM Manuel utilisateur

Milestone

Milestone 72-84 Manuel utilisateur

KUHN

KUHN Hector 3000 Manuel utilisateur

Krone

Krone X-Disc 6200 Manuel utilisateur

Eliet

Eliet DZC450 Manuel utilisateur

Taarup

Taarup BIO+ B4000 Manuel utilisateur

Garland

Garland SHAKER 310 DPG Manuel utilisateur

stable comfort

stable comfort StableWall System Manuel utilisateur

Raven

Raven AccuBoom Manuel utilisateur

International

International 710 Manuel utilisateur

Ashland

Ashland HDW-3217-14 Manuel utilisateur