Yamaha Add-On Effects Manuel utilisateur

What are Add-On Effects?

Add-On Effects are software packages that install additional high-quality effects programs on

digital consoles.

Studio Manager Equalizer601 Window

What is Equalizer601?

Equalizer601 is an Add-On Effects package.

This effect emulates the characteristics of analog equalizers used in 1970s. It adds drive to the sound by

reproducing distortion typical to analog circuits.

What is VCM (Virtual Circuitry Modeling)?

VCM is a technology that enables you to model element levels in analog circuits (such as resistors and capacitors).

This technology was developed by an engineering group led by Mr. Kunimoto, an engineer who developed the

first physical modeling synthesizers, VL1 and VP1. Equalizer601 utilizes VCM technology.

Special Notices

• Copying of the commercially available music sequence data and/or digital audio files is strictly prohibited except for your personal use.

• The software and this Owner’s Manual are exclusive copyrights of Yamaha Corporation.

• Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written

consent of the manufacturer.

• Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held

responsible for the results of the use of this manual and the software.

• The screen displays as illustrated in this Owner’s Manual are for instructional purposes, and may appear somewhat different from

the screens which appear on your computer.

• The company names and product names in this Owner’s Manual are the trademarks or registered trademarks of their respective

companies.

Installing Equalizer601

See the Add-On Effects Installation Guide for more information on installing Equalizer601.

Installing Equalizer601

As with other effects, you can recall and edit the Equalizer601 program on the console or in Studio Manager.

The basic operation is as follows:

Select one of the internal effects processors.

Patch the signal to and from the currently selected effects processor.

Locate the Effects Library page.

Select and recall Equalizer601.

When you recall the program, all effects processor outputs will be muted temporarily.

Locate the Effects Edit page.

Set the parameters. (See the “Part Names and Functions” section for more information on Equalizer601

parameters.)

The procedure for recalling and editing Equalizer601 varies depending on the console you are using.

Refer to the Owner’s Manual that came with your console for more information.

Editing Parameters in Studio Manager

In Studio Manager, editable parameters appear in both the Equalizer601 window and the Generic Editor window.

The Equalizer601 window enables you to edit Equalizer601 specific parameters, and the Generic Editor window

enables you to edit parameters common to Equalizer601 and other Effects.

Refer to the Studio Manager Owner’s Manual for your console for more information on the Generic Editor

window.

Studio Manager Generic Editor Window

Part Names and Functions

Studio Manager Equalizer601 Window

Console screen (This is a DM2000 screen.)

2 3

)

5 6 7 8

In the following section:

Functions marked with are available in Studio Manager.

Functions marked with are available on the console.

[TYPE] button

Enables you to select one of two equalizer types that feature different effects.

The

Clean

equalizer provides non-distorted, clear, typical digital sound, emulating variations in frequency

response in the analog circuits.

The

Drive

equalizer provides distorted, driven sound that enhances analog flavor, emulating changes in

frequency response in the analog circuits.

[INPUT] control

Adjusts the input level.

The range is from –18.0 through +18.0 dB.

[OUTPUT] control

Adjusts the output gain.

The range is from –18.0 through +18.0 dB.

Level meters

Studio Manager displays the Effects output level.

On the console, you can select the Effects input level or output level to be displayed using the

METER:

[IN]/[OUT] buttons

Studio Manager

Console

7 8

Studio Manager Console

Equalizer601 is a 6-band equalizer. It consists of two shelving-type filters (LO and HI) and four peaking-type

filters (MID1-4).

[Q]/[TYPE]

These parameters enable you to control the shape of the frequency response curve for each band filter.

You can also set the sharpness (Q) of the frequency response curve for the MID1-4 filters.

You can select the filter type for the LO band and HI band individually, choosing from four options.

The options are as follows:

LSH-1, LSH-2, HPF-1, and HPF-2 for LO; 0.50 through 16.00 for MID1-4; LPF-1, LPF-2, HSH-1, and HSH-2

for HI.

[F] Frequency

Specifies the filter center frequency.

The value range varies depending on the sampling frequency (fs) as follows:

16.0 Hz through 20.0 kHz (fs=44.1/48 kHz), or 16.0 Hz through 40.0 kHz (fs=88.2/96 kHz).

If the HI filter type is set to HSH-1 ( ) or HSH-2 ( ), the range for the HI band is 1.0 kHz through 40.0

kHz.

[G] (Gain)

Specifies the filter gain.

The range is from –18.0 dB through +18.0 dB.

[SW] button/[SW] control

Turns the corresponding filter on or off. The band filter that is turned off will be disabled.

5 6 7 8

Studio Manager Console

[–]/[+] buttons

Zoom in or out the vertical axis of the graph.

Frequency Response Curve

Studio Manager displays the frequency response curves for all bands and for each band.

You can change the filter frequency or gain by dragging the line in the graph.

The console displays the frequency response curve for all bands.

[FLAT] button

Resets the gain of each band to 0 dB.

You can also reset the Q and frequency values to default by clicking and holding down the FLAT button.

nIf the filter type for the LO band is set to HPF-1 ( ) or HPF-2 ( ), and the filter type for the HI band is set

to LPF-1 ( ) or LPF-2 ( ), holding down the FLAT button will turn off the corresponding band’s SW

button.

Graph display/hide button

Clicking this button opens or closes the frequency response curve graph and the [–]/[+] button section.

)

6 7

Studio Manager

)

Studio Manager Console

Studio Manager

U.R.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation

312IP-01A0

Autres manuels pour Add-On Effects

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Yamaha Logiciel

Yamaha

Yamaha CobraNet MY16-CII Manuel utilisateur

Yamaha

Yamaha TOOLS for TYROS Manuel utilisateur

Yamaha

Yamaha HUB Manuel utilisateur

Yamaha

Yamaha DME-N Manuel utilisateur

Yamaha

Yamaha S90 Manuel utilisateur

Yamaha

Yamaha M7CL StageMix V1.5 Manuel utilisateur

Yamaha

Yamaha MOTIF-RACK ES Manuel utilisateur

Yamaha

Yamaha PM1D Manager V2 Instructions et recettes

Yamaha

Yamaha DME Designer Manuel utilisateur

Yamaha

Yamaha Loopfactory AN200 Manuel utilisateur

Yamaha

Yamaha Faders Manuel utilisateur

Yamaha

Yamaha AE041 Manuel utilisateur

Yamaha

Yamaha M7CL StageMix V1.5 Manuel utilisateur

Yamaha

Yamaha Extension Manuel utilisateur

Yamaha

Yamaha DM2000 V2.1 Instructions et recettes

Yamaha

Yamaha QS1-WD Manuel utilisateur

Yamaha

Yamaha Card Filer Manuel utilisateur

Yamaha

Yamaha FIRESTATION MLAN PATCHBAY Manuel utilisateur

Yamaha

Yamaha PM5D Manuel utilisateur

Yamaha

Yamaha MOTIF RACK ES Manuel

Yamaha

Yamaha Sound Editor ver. 2.10 Manuel utilisateur

Yamaha

Yamaha EZ-220 Page Turner Manuel utilisateur

Yamaha

Yamaha Add-On Effects Manuel utilisateur

Yamaha

Yamaha 03DVEK Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur