Yaesu FT-4XE Manuel utilisateur

VHF/UHF

DUAL BAND FM TRANSCEIVER

FT- 4XR

FT- 4X E

Advance Manual

Clicking (tapping) at the at the bottom left of the current browsing page,

will return to the contents page at any time.

Contents

Communicating with specified other station ..................................4

Selecting the Squelch Type ...........................................................4

Tone squelch feature .....................................................................5

Setting CTCSS Tone frequency ..................................................5

Digital Code Squelch (DCS) feature..............................................6

Setting the DCS CODE............................................................... 6

New Two CTCSS Tone Pager Function ........................................7

Using the Pager Function ...........................................................7

Setting the Code for Your Station................................................ 7

Calling a Specific Station ............................................................8

Receiving “pager code” calls from a

Remote Station (Standby Operation).......................................... 8

Using the Pager Answer Back ....................................................8

Notification of a Call from a Remote Station by the Bell Function

... 9

Convenient Functions..................................................................10

VOX Operation ............................................................................10

VFO Split Mode ...........................................................................10

Split Memory................................................................................10

Using Memory Tag....................................................................... 11

Changing between name tag display and

frequency display (Memory Tune)............................................. 11

The Memory Channel Only Mode................................................12

Canceling Memory Only Mode.................................................. 12

Using Memory Banks ..................................................................13

Registering to Memory Banks...................................................13

Memory Bank Recall.................................................................14

Returning To Memory mode from Memory Bank operation ...... 14

Removing a Memory channel from a Memory Bank................. 14

Contents

How to Skip (Omit) a Channel during Memory Scan Operation

... 14

Programmable Memory Channel Scan (PMS) ............................15

Registering to the Programmable Memory Channels ...............15

Performing Programmable Memory Channel Scan .................. 15

Dual Receive (DW) Function....................................................... 16

Activating the Dual Receive (DW) feature ................................16

Priority Revert Mode .................................................................17

ARTS (Automatic Range Transponder System).......................... 18

Basic ARTS Setup and Operation............................................. 18

ARTS Polling Time Options ......................................................19

ARTS Alert Beep Options ......................................................... 19

CW Identifier Setup................................................................... 19

DTMF Operation..........................................................................20

Setting the DTMF Memory........................................................20

Transmitting the Registered DTMF Code ................................. 21

Manually Transmitting the DTMF Code .................................... 21

Customizing Menu Settings and User Preferences (Set Mode)

... 22

Setting the Set Mode...................................................................22

Tables of Set Mode Operations ...................................................23

Cloning ........................................................................................33

Troubleshooting........................................................................... 34

Communicating with specified other station

Selecting the Squelch Type

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode)

(Selecting the 36 SQL.TYP)

1. Press the [▲] or [▼] key to select one of the modes described below.

Squelch type Icon indication Description

OFF

(default)-Deactivates the tone squelch function and DCS function

OFF, then returns to the normal squelch operation.

R-TONE (appears) Enables receive only tone squelch function.

T-TONE (appears) Enables transmit only tone squelch function.

TSQL (appears) Enables the tone squelch receive function.

REV TN (blinks)

Enables the reverse tone squelch function.

Use to monitor communications based on the squelch

control system in which a received signal containing the

selected tone will be muted, and signals not containing

the selected tone will be heard.

DCS (appears)

Enables the digital code squelch function.

The DCS code may be selected from 104 codes (from

023 to 754).

PAGER (appears)

Activates a new two-tone CTCSS pager function.

When communicating via transceivers with your friends,

specify personal codes (each code is composed of two

tones) so that you can call only specific stations.

2. Press the PTT switch to save the new setting and return to normal operation.

zThe squelch type may be set for each frequency band (BAND).

zThe CTCSS and DCS squelch settings are also active during scanning. If scanning is

performed with the CTCSS and DCS squelch function activated, scanning stops only when a

signal containing the specified CTCSS tone or DCS code is received.

zPressing the MONI/T-CALL switch allows signals that do not contain a tone or DCS code, and

signals with different tones, DCS codes to all be heard.

Tone squelch feature

The tone squelch opens the speaker audio only when a signal containing the specified

CTCSS tone is received. The receiver will be quiet while waiting for a call from a specific

station.

Setting CTCSS Tone frequency

The tone frequency may be selected from 50 frequencies (from 67.0 Hz to 254.1 Hz).

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "36 SQL.TYP")

1. Press the [p] or [q] to select the “TSQL”

2. Press the Function key.

3. Press the [p] or [q] to select the “38 TN FRQ”.

4. Press the Function key.

• The receive (R) tone frequency setting screen will appear.

5. Press the [p] or [q] to select the receive (R) tone fre-

quency.

• Pressing the [ V/M] key to switch to the transmit (T)

tone frequency, then press the [p] or [q] to select the

transmit (T) tone frequency. Receive

6. Press the PTT switch to save the settings and return to normal operation.

zThe tone frequency setting is common with the squelch types as follows:

R-TONE, T-TONE, TSQL, RV TN

zThe default setting is “100.0Hz”.

Digital Code Squelch (DCS) feature

The Digital Code Squelch opens the speaker audio only when a signal containing the

specified DCS code is received.

The DCS code may be selected from 104 types (from 023 to 754).

Setting the DCS CODE

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "36 SQL.TYP")

1. Press the [p] or [q] to select the “DCS”

2. Press the Function key.

3. Press the [p] or [q] to select the “10 DCS.COD”.

4. Press the Function key.

• The receive (R) DCS code setting screen will appear.

5. Press the [p] or [q] to select the receive (R) DCS code.

• Pressing the [ V/M] key to switch to the transmit (T)

DCS code, then press the [p] or [q] to select the

transmit (T) DCS code.

Receive

6. Press the PTT switch to save the settings and return to normal operation.

The default DCS code is “023”.

New Two CTCSS Tone Pager Function

When using the FT-4XR/XE transceivers with a group of friends, setting the two CTCSS

tone personal codes allows calling just the specific stations.

Using the Pager Function

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "36 SQL.TYP")

1. Press the [p] or [q] to select the “PAGER”.

2. Press the PTT switch to save the setting and return to

the normal operation.

• The new pager function is activated.

PAGER icon

Setting the Code for Your Station

Set the “pager code” to be called by other stations.

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "23 PAG.CDR")

1. Press the numeric key to input the first element of the

code from 01 to 50.

• The icon is moved to the second element of the code.

2. Press the numeric key to input the second element of

the code from 01 to 50.

• The first and second element of the code may not be

set to the same code.

• Press the [p] or [q] to switch the icon between first

code and second code.

3. Press the PTT switch to save the setting and return to normal operation.

zThe reverse combination works as the same code, that is “05 47” is the same as “47 05”.

zIf the same code is specified for all individuals, all the individuals can be called at the same

time.

zThe default code is “05 47”.

zWhen receiving the signals, the intermittent sound of the tone signal may be heard slightly.

Calling a Specific Station

The “pager code” may be set to call to specific stations.

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set mode) (Selecting "24 PAG.CDT")

1. Press the numeric key to input the first element of the

code from 01 to 50.

• The icon is moved to the second element of the code.

2. Press the numeric key to input the second element of

the code from 01 to 50.

• The first and second element of the code may not be

set to the same code.

• Press the [p] or [q] to switch the icon between first

code and second code.

3. Press the PTT switch to save the setting and return to normal operation.

4. Press the PTT switch to transmit a call to the specific station.

Receiving “pager code” calls from a Remote Station (Standby Operation)

When the Pager function is activated, and a call is received with a corresponding Code,

“PAGING” blinks and the audio is heard.

Furthermore, when the Bell function ( 9) is activated, the bell rings and the icon

blinks while calling from the other station.

Using the Pager Answer Back

If the Answer Back feature is ON, when called by another station with a corresponding

pager code, the transceiver is automatically placed in the transmit mode (for about 2.5

seconds) to notify the other station that you are ready to communicate.

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "22 PAG.ABK")

1. Press the [p] or [q] to select the “ABK.ON”.

2. Press the PTT switch to save the setting and return to normal operation.

Notification of a Call from a Remote Station by the Bell Function

The Bell may be set to sound an Alert when a call from another station containing a corre-

sponding tone, DCS or pager code is received.“ ”icon on the LCD blinks while the sound

alerts.

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "6 BELL")

1. Press the [p] or [q] to select the desired number of

times (1-8 times or continuous) the Bell rings.

• • • OFF 1T 3T 

5T 8T CONT (continuous)  • • •

2. Press the PTT switch to save the setting and return to

normal operation.

BELL Icon

Example of New PAGER function

zThe default setting is “OFF”.

zIf setting the “CONT” (continuous), the bell keeps sounding until operating something.

zIf “OFF” is set in the Set Mode “5 BEEP”, the bell does not sound.

Convenient Functions

VOX Operation

The VOX (Voice Over Transmit) system provides automatic transmit/receive switching

based on voice input without pressing the PTT switch in order to transmit. The optional

SSM-512B VOX Earpiece Microphone is supported.

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "43 VOX")

1. Press the [p] key or [q] key to select the “VOX ON”.

2. Press the PTT switch to save the setting and return to

normal operation.

• When the VOX system is activated, the “ ” icon will

appear on the display.

Connecting to the SSM-512B VOX Earpiece Microphone, refer to the supplied SSM-512B manual

sheet.

VFO Split Mode

Two different frequencies, one for receive (VFO-A) and another for transmit (VFO-B),

may be transmitted and received (or vice versa).

Press and hold

the Function key →Press the por qkey →Press the Function key

(Entering the Set Mode) (Selecting "42 VFO.SPL")

1. Press the [p] or [q] to select the “VSP. ON”.

2. Press the PTT switch to save the setting and return to normal operation.

3. Set VFO-A for the desired receiving (downlink) frequency.

4. Press the [ V/M] key to set VFO-B for desired transmit (uplink) frequency.

5. Press the [ V/M] key twice to re-establish VFO-A as the “Main” (receive) VFO.

6. When the PTT switch is pressed to transmit, VFO-A and VFO-B will reverse posi-

tions. Releasing the PTT switch, the reverse position is canceled.

Split Memory

Two different frequencies, one for receive and another for transmit, may be registered to

a memory channel.

1. Register the receive frequency to a memory channel first.

See “Registering to Memory Channels” (Operating Manual).

2. Set the transceiver to the desired transmit frequency.

3. Press and hold the [ V/M] key.

• A blank memory channel will be displayed automatically.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Yaesu Émetteur-récepteur

Yaesu

Yaesu FT-736R Manuel utilisateur

Yaesu

Yaesu FTM-100DR Manuel utilisateur

Yaesu

Yaesu FT-1500M Manuel utilisateur

Yaesu

Yaesu FT-817 - Manuel utilisateur

Yaesu

Yaesu FT2DR Manuel

Yaesu

Yaesu FT-450D Guide produit

Yaesu

Yaesu FTV-700 Manuel utilisateur

Yaesu

Yaesu FT DX 9000 CONTEST - 2 Manuel utilisateur

Yaesu

Yaesu VX-1R Manuel utilisateur

Yaesu

Yaesu FT1DR Manuel utilisateur

Yaesu

Yaesu FTM-7250DE Manuel utilisateur

Yaesu

Yaesu FT-600 Manuel utilisateur

Yaesu

Yaesu FT-710 Manuel utilisateur

Yaesu

Yaesu FTdx5000MP Manuel utilisateur

Yaesu

Yaesu FT-2000 - MENU MODE LIST Manuel utilisateur

Yaesu

Yaesu FTA-750L Manuel utilisateur

Yaesu

Yaesu FTM-10R Manuel utilisateur

Yaesu

Yaesu Mark-V FT-1000MP Manuel

Yaesu

Yaesu FT-1000 Guide d'installation

Yaesu

Yaesu VX-170 Manuel utilisateur

Yaesu

Yaesu FT-252 Manuel utilisateur

Yaesu

Yaesu FT-290R II Manuel utilisateur

Yaesu

Yaesu FT2DR Manuel utilisateur

Yaesu

Yaesu FT-23R MKII Manuel

Manuels Émetteur-récepteur populaires d'autres marques

Kenwood

Kenwood ProTalk TK-3201 Manuel utilisateur

Texas Instruments

Texas Instruments TLK10232 Manuel utilisateur

Mizuho

Mizuho MX-2 Guide produit

Kenwood

Kenwood TK-3180 Manuel d'utilisation et d'entretien

Blitz

Blitz MJ-398U Manuel utilisateur

Utilicom

Utilicom LongRanger 2050 Manuel utilisateur

Standart

Standart HX290UKA Manuel utilisateur

Altronix

Altronix Pace1PTM Manuel utilisateur

Kirisun

Kirisun PT2208 Manuel utilisateur

ELECRAFT

ELECRAFT KX2 Manuel utilisateur

Zodiac

Zodiac K3 Manuel utilisateur

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Manuel utilisateur

Kenwood

Kenwood TK-2217 Manuel utilisateur

Siemens

Siemens PSO 4000 Manuel utilisateur

Kenwood

Kenwood TS-590SG Manuel utilisateur

Midland

Midland G8E-BT Manuel

ComNav

ComNav Mariner X2 Manuel utilisateur

Uniden

Uniden UH820 Series Manuel utilisateur