Yaesu ADMS-8 Manuel utilisateur
ADMS-8
Operation Manual
The ADMS-8 software provides convenient editing of the FT2DR/DE memory channel
frequencies, channel information and alpha tags, using a personal computer. Also the
transceiver parameters and the setup menu items may be edited and congured easily
from the computer keyboard.
YAESU MUSEN CO., LTD.
2
TABLE OF CONTENTS
Introduction.....................................................4
System Requirements ...................................4
Operating system (OS) ..........................................4
CPU .......................................................................4
RAM (system memory) ..........................................4
HDD (Hard Disk) ....................................................4
Necessary PC peripheral interfaces ......................4
microSD .................................................................4
Cables....................................................................4
Display examples...........................................5
Before using the ADMS-8 FT2DR/DE
Programmer...................................................7
Using the ADMS-8 software ..........................7
Functions ........................................................8
File.................................................................8
New........................................................................8
Open ......................................................................8
Exit .........................................................................8
Save.......................................................................8
Save As..................................................................8
Import / Import with FT1DR/DE / FT2DR/DE
format.....................................................................9
Export / Export with FT1DR/DE / FT2DR/DE
format.....................................................................9
Print......................................................................10
End.......................................................................10
Edit...............................................................10
Undo ....................................................................10
Cut .......................................................................10
Copy.....................................................................10
Paste....................................................................10
Find ......................................................................11
Find Next..............................................................11
Goto Channel.......................................................11
Insert Channel......................................................11
Delete Channel ....................................................12
Clear Channel ......................................................12
Move Up...............................................................12
Move Down ..........................................................12
Add Frequency Range .........................................12
Sort ......................................................................13
Communications..........................................14
Get Data from FT2D ............................................14
Send Data to FT2D ..............................................15
Get Data From SD Card ......................................15
Send Data to SD Card .........................................16
COM port Settings ...............................................17
Settings........................................................17
Settings ................................................................17
Common ...........................................................17
GM_WIRES-X...................................................18
APRS GPS .......................................................19
APRS Beacon...................................................20
Memory.............................................................21
Tool Bar ...............................................................21
Status Bar ............................................................21
Window........................................................22
Tile(up and down) ................................................22
Tile(right and left) .................................................23
Cascade...............................................................23
Setting the Template Items..........................24
Memories ............................................................24
Priority CH ........................................................24
Receive Frequency / Transmit Frequency........24
Offset Frequency ..............................................24
Offset Direction .................................................24
Operating MODE ..............................................25
Name ................................................................25
Tone Mode........................................................25
CTCSS Frequency............................................25
DCS Code.........................................................25
DCS Polarity .....................................................25
User CTCSS .....................................................25
TX Power ..........................................................25
Skip...................................................................25
Step ..................................................................26
Memory Mask ...................................................26
ATT ...................................................................26
S-Meter SQL.....................................................26
Bell....................................................................26
Vibrator .............................................................26
Half DEV ...........................................................26
Clock Shift.........................................................26
BANK 1 to BANK 24 .........................................26
Comment ..........................................................26
SKIP.....................................................................27
PMS .....................................................................28
VFO A / VFO B ....................................................28
Receive Frequency...........................................29
Transmit Frequency..........................................29
Operating MODE ..............................................30
Tone Mode........................................................30
Comment ..........................................................30
HOME ..................................................................30
Receive Frequency / Transmit Frequency........31
Operating MODE ..............................................31
Comment ..........................................................31
SW Banks ............................................................32
BANK 1 to BANK 24 .........................................32
Comment ..........................................................32
Marine Banks .......................................................33
BANK 1 to BANK 24 .........................................33
Comment ..........................................................33
3
Weather ...............................................................34
BANK 1 to BANK 24 .........................................34
Comment ..........................................................34
Troubleshooting...........................................35
The FT2DR/DE cannot receive or transmit data
to the computer. ...................................................35
The Data transfer does not start. .........................35
The data transmission has stopped before
completion............................................................35
The data import/export is not successful. ............35
Contact YAESU Technical Support .............35
4
Introduction
The ADMS-8 programming software uses a Personal Computer to quickly enter and save the
FT2DR/DE memory channel frequencies and data. Also the many menu settings may be adapted
for individual operating preferences. All of the information is saved. The setting data can be imported
from the FT2DR/DE and edited setting data can be transferred to the FT2DR/DE. Furthermore, by
using the ADMS-8 software, memory channel information* can be exchanged between the FT1DR/
DE and FT2DR/DE.
* Some information such as memory tags are excluded.
System Requirements
In order to use this program, a personal computer (PC) with one of the following Windows operating
systems, and a serial data connection cable are required.
Operating system (OS)
Any one of the following operating system environments
Microsoft Windows®10 (32 bit/64 bit)
Microsoft Windows®8.1 (32 bit/64 bit)
Microsoft Windows®8 (32 bit/64 bit)
Microsoft Windows®7 (32 bit/64 bit, Service Pack 1 or later)
Microsoft Windows Vista®(32 bit/64 bit, Service Pack 2 or later)
CPU
The performance of the CPU must be able to satisfy the operating system requirements.
RAM (system memory)
The capacity of the RAM (system memory) must be more than sufficient to satisfy the operating
system requirements.
HDD (Hard Disk)
The capacity of the HDD must be more than sufcient to satisfy the operating system requirements.
In addition to the memory space required to run the operating system, about 50 MB or more of
additional memory space is required to run the program.
Necessary PC peripheral interfaces
USB port (USB 1.1 / USB 2.0) or RS-232C interface (COM port)
microSD
Commercially available microSD memory card
* When using the following cables, a microSD memory card is not necessary.
Cables
• When using a USB port on the computer: the optional SCU-19 PC connection cable for USB
• When using a COM port connection: the optional SCU-16 and CT-169 cables
* When using the SCU-19 or SCU-16 cable, be sure to install the designated driver before
connecting the cable to the computer.
* When using a microSD memory card, these cables are not necessary.
5
Display examples
This is the rst screen to be displayed when starting the ADMS-8 software.
Click the left mouse button on the icon of the Title bar to enlarge a window.
The display window is shown in Full screen mode.
6
Click the left mouse button on each TAB in the title bar (PMS, VFOA, etc) to display the frequency list
of the desired memory channels, VFO and other preset transceiver settings.
Basic setting items which are not related to memory channels can be congured from “SetMode”.
Click the left mouse button on each item of the "Settings" in the "Settings" menu to open the item
"SetMode" window.
7
Before using the ADMS-8 FT2DR/DE Programmer
When using the optional SCU-19 PC USB connection cable, or the SCU-16 USB serial adaptation
cable, be sure to install the designated driver before connecting either cable to the computer.
Select the communication port that is connected to the FT2DR/DE.
Click the left mouse button on the "COM port Settings" item in the "Communications" menu to open
the "COM Port Settings" window.
Click the left mouse button on the "▼" button to display the COM Port List, and then click the left
mouse button on the communication port that is connected to the FT2DR/DE.
When using the SCU-19 or SCU-16, open the Device Manager on the computer and then click the
port (COM or LPT) to select the port number (COM**) displayed as Prolic USB-to-Serial Comm Port
(COM**).
If Prolic USB-to-Serial Comm Port is not displayed in the COM port list, the driver for SCU-19 or
SCU-16 is not installed correctly. Install the device driver correctly to the computer.
After correctly installing the SCU-19 or SCU-16 drivers, if the COM Port number is not correct and the
popup message “The port COMxx does not exist” is displayed click OK. Open [Device Manager] and
nd the correct COM Port number. Then choose the correct COM Port number from the list, or type
the correct COM Port number. Then click the [Determine] button to save the setting.
Using the ADMS-8 software
To enable the FT2DR/DE clone mode for use with the ADMS-8 software, use the following procedure:
1. Turn FT2DR/DE power OFF.
2. While pressing the key turn the power ON.
3. To acquire data from the FT2DR/DE, touch “RECEIVE”. To transfer data to the FT2DR/DE, touch
“SEND”.
8
Functions
File
New
Creates a new conguration le.
Click the left mouse button on the “New” parameter in the “File” menu to open a new conguration
le.
Multiple conguration les may be created and opened at the same time.
Standard values are preset for each memory channel, VFO and set mode.
Open
Opens a previously saved conguration le.
Click the left mouse button on the "Open" parameter in the "File" menu to display the “Open” window.
Select the existing saved template le, and click the “Open” button.
Exit
Close the displayed template le by clicking the left mouse button on the “Close” parameter in the “File”
menu.
If the present conguration has not been saved, you will be asked to conrm whether or not you wish
to save it.
Save
To save the present conguration, and overwrite the selected conguration le without changing the
le name, click the left mouse button on the "Save" parameter in the "File" menu.
Save As
To save the configuration file with a new name, click the left mouse button on the "Save As"
parameter in the "File" menu. Specify the file name and destination folder for the selected
conguration le and then click the “Save” button to save the le.
9
Import / Import with FT1DR/DE / FT2DR/DE format
ADMS-8 data les may be created using a spreadsheet such as Microsoft Excel.
To create a data le for the import of data, save the spreadsheet in the "CSV" comma separated le
format.
A spreadsheet may be easily created by exporting the template data in the "CSV" format using the
ADMS-8 "Export" command. After the "CSV" data has been edited the spreadsheet may be imported
back into the ADMS-8 Programmer. (See the "Export" command instructions below for details).
A separate import le is needed for each template.
For example, to import the VFO and memory templates; rst, click the "VFO" tab to display the VFO
template, then import the VFO (CSV) file; next, click the "Memories" tab to display the "Memory"
template; then import the Memory (CSV) le.
Do not edit the "Check" line at the right side end of the completed CSV le.
Export / Export with FT1DR/DE / FT2DR/DE format
To export the data le in the “CSV” (Comma Separated Values) format, click the left mouse button on
the "Export" parameter in the "File" menu, On the “Save as” screen displayed, specify the directory
and le name and save the le.
10
Print
To print the current template file data to hard copy, click the left mouse button on the "Print"
parameter in the "File" menu, the "Print" window will open to enable printing. Set the start line and the
end line of the data you want to print, and then click the left mouse button on the "Printing" button to
start printing.
To change the specic printer settings, go to the Printer properties by clicking the left mouse button
on the "Printer setup" button.
End
To exit the ADMS-8 programmer, click the left mouse button on the "End" parameter in the "File"
menu to close the ADMS-8 software. If the following pop-up screen appears to conrm saving, follow
the on-screen instruction to select the desired button and close the ADMS-8 software.
Edit
Undo
To undo the edited data, click the left mouse button on the "Undo" parameter in the "Edit" menu.
Cut
To cut the data of the selected area, click the left mouse button on the "Cut" parameter in the "Edit"
menu.
Copy
To copy the data of the selected area to the clipboard, click the left mouse button on the "Copy"
parameter in the "Edit" menu.
Paste
To paste the clipboard data to the selected area, click the left mouse button on the "Paste" parameter
in the "Edit" menu.
Table des matières
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
