Xlink ITC-BTTN Manuel utilisateur
1
ITC-BTTN Cellular Bluetooth Gateway
Owner’s Manual
2
Introduction .......................................................................................................................................3
Package Contents.............................................................................................................................3
XLink Connections Diagram.........................................................................................................4
Setup.....................................................................................................................................................5
Pairing your Bluetooth Cell Phone to the XLink..............................................................6
Automatic Bluetooth Connection........................................................................................7
Manual Bluetooth Connection..............................................................................................8
Testing the Setup .............................................................................................................................8
Light Indicators .................................................................................................................................9
Using the XLink .................................................................................................................................10
Placing a Call...............................................................................................................................10
Selecting a Line..........................................................................................................................11
Receiving a Call..........................................................................................................................11
Force Call Connection .............................................................................................................12
Speed Dialing .............................................................................................................................12
Voice Mail.....................................................................................................................................13
Caller ID.........................................................................................................................................14
Call Waiting..................................................................................................................................14
Voice Dialing...............................................................................................................................14
Computer Connectivity..................................................................................................................15
Troubleshooting ...............................................................................................................................15
Warranty ..............................................................................................................................................18
Safety and Regulations...................................................................................................................19
FCC Notices .................................................................................................................................21
Calling 911...................................................................................................................................21
Wall Mount Information.................................................................................................................22
TABLE OF CONTENTS
3
INTRODUCTION
Congratulations on your purchase of the XLink ITC-BTTN Cellular Bluetooth Gateway.
In addition to your regular telephone line you will now be able to access up to 3
Bluetooth enabled cell phones from any standard telephone connected to the XLink.
XLink ITC-BTTN is designed to work with or without telephone service (land line).
WARNING:
• If the RED Error light starts ashing then the lines connected to the XLink
have not been connected properly. In this case immediately check that
connections from the telephone to the XLink and/or from the telephone
service line are correctly installed. When connections are correct the red light
does not ash and the green light remains on.
PACKAGE CONTENTS
Each XLink ITC-BT gift box includes the following.
• XLink ITC-BT Unit
• 9-Volt DC Power Adapter
• Vertical Stand
• Quick Start Guide
• Owner’s Manual
• Telephone Cord
4
XLINK CONNECTIONS DIAGRAM
CELL PHONE #3 Button & Status Light
CELL PHONE #2 Button & Status Light
CELL PHONE #1 Button & Status Light
TELEPHONE CORD CONNECTION
ERROR LIGHT
POWER ADAPTER CONNECTION
USB CONNECTION
POWER INDICATOR
TELEPHONE SERVICE LINE CONNECTION
5
SETUP
1. Connect stand to your XLink as included in your
gift box.
2. Plug a standard corded or cordless telephone
into the XLink using a regular telephone cord.
3. Plug the telephone service line into the XLink
using the cord from the wall.
4. Plug the supplied power adapter into the XLink
and the other end into a wall power outlet.
5. To pair your Bluetooth cell phone refer to “Pair
your Bluetooth cell phone to the XLink.”
HINTS:
• Place your cell phone where you have the best reception in your home or
oce.
• For best audio quality keep your cell phone within 10 feet of the XLink unit.
• Using a multi handset cordless phone gives you multiple extensions.
• Certain cordless phones that operate in the 2.4 GHz frequency range may
interfere with the cell phone reception. Keep as much distance as possible
between the XLink and these types of cordless phones.
• Some wireless networks, such as 802.11 and Wi-Fi, may interfere with
Bluetooth radio signals. Keep as much distance as possible between this type of
equipment, the XLink and your cell phones.
HOME PHONE
WALL OUTLET
STAND
TO WALL
6
Each XLink ITC-BTTN can be paired to three dierent cell
phones, one for each line. To pair a Bluetooth cell phone to
a line perform the following steps:
1. Press and hold one of the three line buttons on the
XLink ITC-BTTN until it ashes rapidly (keep button
pressed for approximately 4 seconds).
2. Put your cell phone into the mode where it searches for
Bluetooth devices (similar to searching for a Bluetooth car kit). This may be found in
your cell phone’s menu under ‘Tools’, ‘Setup’, ‘Bluetooth’ and/or ‘ Connections’ menu.
If given the choice, search for ‘Handsfree’ devices and select “Look for Devices”. Your
cell phone should then scan/search for Bluetooth devices
3. When the XLink is found XLink will be displayed on your cell phone’s LCD. Accept this
device. In order to accept, your cell phone may ask you to do so by pressing any number
of selections including; ‘select’, ‘bond’, ‘pair’, ‘yes’, ‘ok’, etc.
4. Enter the pass code: 1 2 3 4
5. Once the pairing is complete, the selected line’s blue light button on the XLink will
stop ashing quickly and remain solid.
Once paired, the XLink will remember the cell phone. Automatic connecting occurs
whenever the cell phone is within range (approx. 30ft.) of your XLink.
PAIRING YOUR BLUETOOTH ENABLED CELL PHONE
TO THE XLINK
7
HINT:
•Each line can only be paired to ONE cell phone at a time.
• A line can be paired to a dierent cell phone at any time by repeating the
pairing procedure.
•(as soon as pairing is started for a line) Previous pairing
information is lost.
• A paired line can be “unpaired” and prepared for re-pairing by holding
down the line button until the button ashes rapidly.
• The pairing process can be aborted at any time by pressing the line button.
The previous paired cell phone will be disconnected.
Once a line is paired to a cell phone it will automatically try to connect. When the cell
phone goes out of range, the line light will ash slowly to indicate it is not connected and
is searching for the cell phone. When the cell phone comes into range of the XLink it will
automatically connect to the XLink and the line light will turn solid blue to indicate the
connection.
If you are on a call and walk into range, the XLink ITC-BTTN and cell phone will
automatically connect. You will be able to continue your call without interruption.
If a line light is not ashing and you wish to place the line into automatic connection mode,
simply press the line button once.
AUTOMATIC BLUETOOTH CONNECTION
8
You may not want live calls to be transferred automatically or you may want to force the
cell phone to disconnect from the XLink.
When a line is connected (blue light remains on) pressing the line button will disconnect
that line and the light will turn o once disconnected. Audio will be transferred to the cell
phone and you can continue your call on the cell phone.
When a line is not connected and not searching (blue light remains o) pressing the line
button will put the line into searching mode (blue light ashes slowly). If the cell phone
has been previously paired and is within range the cell phone will connect with the XLink
and the blue light will remain solid.
NOTE:
• Some cell phones will prompt you when you come within range of the XLink. You can
then decide if you want to transfer the call to the XLink.
After connecting one or more telephones to the XLink, the setup test feature can be
used to ensure proper connections.
1. Ensure the green light is on and the red light is not ashing.
2. Simultaneously press and hold the line 1 and line 2 buttons for approximately two
seconds: all telephones connected to the XLink should start ringing.
HINT:
• If an extension telephone does not ring, check that it is powered and that all
cables are properly connected.
MANUAL BLUETOOTH CONNECTION
TESTING THE SETUP
9
NOTE:
• Some older analog telephones may not ring properly when connected to the
XLink ITC-BTTN. Avoid these types of phones.
GREEN Solid
Indicates the unit is powered up and running
normally.
GREEN Flashing
Indicates there is an incoming call on the
telephone service line (land line)
RED Flashing
Indicates the XLink connections have not been
connected properly. Immediately re-check line
connections until the RED light turns o and the
green light remains on.
BLUE Solid
Indicates the selected line is connected to cell phone
BLUE Fast Flash
Indicates the selected line is in pairing mode. Use your cell phone to search and pair to
the XLink.
BLUE Uneven Flash
Indicates the selected line is connected to cell phone and there is an incoming call on
this line.
LIGHT INDICATORS BLUE
10
To use the XLink connect your normal corded or cordless telephone into the connector
on the XLink with a standard telephone cable. This phone is now your extension
telephone. To use your telephone service line, connect the telephone service line to
the designated connection on the XLink (see page 4 for Connection Diagram).
BLUE Slow Flash
Indicates the selected line is paired but the cell phone is currently out of range and/or
temporarily not connected. XLink is actively searching for this cell phone.
BLUE O
Indicates the selected line is not paired or not searching for a cell phone (Manual
Connection Mode).
USING THE XLINK
PLACING A CALL
XLink ITC-BTTN is designed to work with your standard phone and your telephone service
or independently of your telephone service. If you have connected your telephone service
line to the XLink you will dial out directly by simply picking up the phone and dialing. If you
wish to dial out on your cell phone simply select the appropriate line, “one” “two” or “three” by
pressing 1 FLASH , 2 FLASH , or 3 FLASH accordingly and dial the desired number.
To place a call on any telephone connected to the XLink, simply pick up the handset
and dial the number. When dialing out using a cellphone connected to the XLink, an optional
# digit may be dialed at the end of the number to activate dialing immediately, the same as
Autres manuels pour ITC-BTTN
1
Table des matières
Autres manuels Xlink Porte
Manuels Porte populaires d'autres marques
LST
LST M500RFE-AS Manuel utilisateur
Kinnex
Kinnex Media Gateway Manuel utilisateur
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuel utilisateur
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur
Telsey
Telsey CPVA 500 - SIP Manuel utilisateur
