Xilinx AC701 Manuel utilisateur

October 2012
AC701 Built-In Self Test
Flash Application
XTP194

© Copyright 2012 Xilinx, Inc. All Rights Reserved.
XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of
their respective owners.
NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied.
Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this
Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to
correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical
support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.
Revision History
Date Version Description
10/23/12 1.0 Initial Version.

Overview
Xilinx AC701 Board
Software Requirements
AC701 Setup
AC701 BIST (Built-In Self Test)
References
Note: This presentation applies to the AC701

AC701 BIST Design Description
Description
–The Built-In System Test (BIST) application uses an EDK MicroBlaze system to
verify board functionality. A UART based terminal program interface offers
users a menu of tests to run.
Reference Design IP
–EDK IP: MicroBlaze, axi_interconnect, lmb_v10, mdm, lmb_bram_if_cntlr,
bram_block, axi_bram_ctrl, axi_uart16550, axi_ethernet, axi_dma, axi_gpio,
clock_generator, axi_7series_ddrx, proc_sys_reset, axi_intc, axi_timer, axi_iic,
axi_emc, axi_xadc, chipscope_icon, chipscope_vio, util_vector_logic
•Embedded System Tools Reference Guide (UG111)
•http://www.xilinx.com/ise/embedded/edk_ip.htm
Reference Design Source
–rdf0220.zip
–Available through http://www.xilinx.com/ac701
Note: Presentation applies to the AC701