Xilinx MIcroBlaze Development Spartan-3E 1600E Kit Manuel utilisateur

Getting Started with the

MicroBlaze Development

Kit - Spartan-3E 1600E

Edition

UG258 (v1.3) November 30, 2007

www.BDTIC.com/XILINX

Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition

UG258 (v1.3) November 30, 2007 www.xilinx.com

Xilinx is disclosing this Document and Intellectual Property (hereinafter “the Design”) to you for use in the development of designs to operate

on, or interface with Xilinx FPGAs. Except as stated herein, none of the Design may be copied, reproduced, distributed, republished,

downloaded, displayed, posted, or transmitted in any form or by any means including, but not limited to, electronic, mechanical,

photocopying, recording, or otherwise, without the prior written consent of Xilinx. Any unauthorized use of the Design may violate copyright

laws, trademark laws, the laws of privacy and publicity, and communications regulations and statutes.

Xilinx does not assume any liability arising out of the application or use of the Design; nor does Xilinx convey any license under its patents,

copyrights, or any rights of others. You are responsible for obtaining any rights you may require for your use or implementation of the Design.

Xilinx reserves the right to make changes, at any time, to the Design as deemed desirable in the sole discretion of Xilinx. Xilinx assumes no

obligation to correct any errors contained herein or to advise you of any correction if such be made. Xilinx will not assume any liability for the

accuracy or correctness of any engineering or technical support or assistance provided to you in connection with the Design.

THE DESIGN IS PROVIDED “AS IS” WITH ALL FAULTS, AND THE ENTIRE RISK AS TO ITS FUNCTION AND IMPLEMENTATION IS

WITH YOU. YOU ACKNOWLEDGE AND AGREE THAT YOU HAVE NOT RELIED ON ANY ORAL OR WRITTEN INFORMATION OR

ADVICE, WHETHER GIVEN BY XILINX, OR ITS AGENTS OR EMPLOYEES. XILINX MAKES NO OTHER WARRANTIES, WHETHER

EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE DESIGN, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE, TITLE, AND NONINFRINGEMENT OF THIRD-PARTY RIGHTS.

IN NO EVENT WILL XILINX BE LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, EXEMPLARY, SPECIAL, OR INCIDENTAL DAMAGES,

INCLUDING ANY LOST DATA AND LOST PROFITS, ARISING FROM OR RELATING TO YOUR USE OF THE DESIGN, EVEN IF YOU

HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE TOTAL CUMULATIVE LIABILITY OF XILINX IN CONNECTION

WITH YOUR USE OF THE DESIGN, WHETHER IN CONTRACT OR TORT OR OTHERWISE, WILL IN NO EVENT EXCEED THE

AMOUNT OF FEES PAID BY YOU TO XILINX HEREUNDER FOR USE OF THE DESIGN. YOU ACKNOWLEDGE THAT THE FEES, IF

ANY, REFLECT THE ALLOCATION OF RISK SET FORTH IN THIS AGREEMENT AND THAT XILINX WOULD NOT MAKE AVAILABLE

THE DESIGN TO YOU WITHOUT THESE LIMITATIONS OF LIABILITY.

The Design is not designed or intended for use in the development of on-line control equipment in hazardous environments requiring fail-

safe controls, such as in the operation of nuclear facilities, aircraft navigation or communications systems, air traffic control, life support, or

weapons systems (“High-Risk Applications”). Xilinx specifically disclaims any express or implied warranties of fitness for such High-Risk

Applications. You represent that use of the Design in such High-Risk Applications is fully at your risk.

Inc. All other trademarks are the property of their respective owners.

www.BDTIC.com/XILINX

Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition

www.xilinx.com UG258 (v1.3) November 30, 2007

Revision History

The following table shows the revision history for this document.

Version Revision

08/22/06 1.0 Initial Xilinx release.

11/06/06 1.1 Updated command code in the Generating the MFS Image section of Chapter 3.

4/24/07 1.2 Updated for EDK 9.1i

11/30/07 1.3 Updated for EDK 9.2.01i

www.BDTIC.com/XILINX

Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition

UG258 (v1.3) November 30, 2007 www.xilinx.com

www.BDTIC.com/XILINX

Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition 1

UG258 (v1.3) November 30, 2007 www.xilinx.com

Preface: About This Guide

Guide Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Additional Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Typographical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Online Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Chapter 1: MicroBlaze Development Kit - Getting Started

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Quick Start Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Demo Description and Configuration Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . 7

Demo Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Configuration Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Executing the Demos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Chapter 2: MicroBlaze Development Kit BlueCat Linux Reference

System

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Hardware Specifics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Address Map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

System Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Software Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Executing the BlueCat Linux Reference System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Generating the Bitstream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Downloading the Bitstream . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Downloading the BlueCat Linux Kernel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Executing BlueCat Linux Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Table of Contents

www.BDTIC.com/XILINX

2 Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition

www.xilinx.com UG258 (v1.3) November 30, 2007

www.BDTIC.com/XILINX

Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition 3

UG258 (v1.3) November 30, 2007 www.xilinx.com

Preface

About This Guide

The MicroBlaze™ Development Kit - Spartan™-3E 1600E Edition showcases various

features of the SP3E1600E Development Platform. This kit includes reference systems and

demonstrations. This document describes how to use and run them.

Guide Contents

This manual contains two chapters:

•Chapter 1, “MicroBlaze Development Kit - Getting Started,”

•Chapter 2, “MicroBlaze Development Kit BlueCat Linux Reference System,”

Additional Resources

To search the database of silicon and software questions and answers, or to create a

technical support case in WebCase, see the Xilinx website at:

http://www.xilinx.com/support.

Conventions

This document uses the following conventions. An example illustrates each convention.

Typographical

The following typographical conventions are used in this document:

Convention Meaning or Use Example

Courier font

Messages, prompts, and

program files that the system

displays

speed grade: - 100

Courier bold Literal commands that you enter

in a syntactical statement ngdbuild design_name

Helvetica bold

Commands that you select from

a menu File →Open

Keyboard shortcuts Ctrl+C

www.BDTIC.com/XILINX

4 Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition

www.xilinx.com UG258 (v1.3) November 30, 2007

Preface: About This Guide R

Online Document

The following conventions are used in this document:

Italic font

Variables in a syntax statement

for which you must supply

values

ngdbuild design_name

References to other manuals

See the Development System

Reference Guide for more

information.

Emphasis in text

If a wire is drawn so that it

overlaps the pin of a symbol, the

two nets are not connected.

Square brackets [ ]

An optional entry or parameter.

However, in bus specifications,

such as bus[7:0], they are

required.

ngdbuild [option_name]

design_name

Braces { } A list of items from which you

must choose one or more lowpwr ={on|off}

Vertical bar | Separates items in a list of

choices lowpwr ={on|off}

Vertical ellipsis

Repetitive material that has

been omitted

IOB #1: Name = QOUT’

IOB #2: Name = CLKIN’

Horizontal ellipsis . . . Repetitive material that has

been omitted

allow block block_name loc1

loc2 ... locn;

Convention Meaning or Use Example

Blue text Cross-reference link to a location

in the current document

See the section “Additional

Resources” for details.

Refer to “Title Formats” in

Chapter 1 for details.

Red text Cross-reference link to a location

in another document

See Figure 2-5 in the Virtex-4

User Guide.

Blue, underlined text Hyperlink to a website (URL) Go to http://www.xilinx.com

for the latest speed files.

www.BDTIC.com/XILINX

Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition 5

UG258 (v1.3) November 30, 2007 www.xilinx.com

Chapter 1

MicroBlaze Development Kit - Getting

Started

Overview

The MicroBlaze™ Development Kit - Spartan™-3E 1600E Edition is designed to aid the

user in utilizing the SP3E1600E development board more efficiently. This getting started

guide provides a detailed description of what is included in the kit along with instructions

on how to use the resources included in this kit. The development kit comes with a number

of pre-installed demonstrations and examples. This document describes how to use and

run them.

The development kit includes reference systems and demonstrations. These Reference

systems are available from the Xilinx Spartan-3E MicroBlaze Development Kit Reference

Designs website:

http://www.xilinx.com/products/boards/s3e1600e/reference_designs.htm

The demo systems are also pre-loaded in the Xilinx Platform Flash and the Intel StrataFlash

on the development board. Please read the remainder of the document for specific details

on these resources.

The reference systems included in this kit require the use of a computer installed with the

following software:

•Integrated Software Environment™ (ISE) 9.2i, including Service Pack 3

•Xilinx Embedded Development Kit (EDK) 9.2.01i

Note: These software configurations are required for the reference systems to function properly.

Please ensure the proper versions are installed prior to working with the reference systems. Detailed

information about how to properly install your software is included in the Software Installation section

later in this document.

For current information about the included development platform, visit the following Web

page:

http://www.xilinx.com/sp3e1600e

www.BDTIC.com/XILINX

6 Getting Started with the MicroBlaze Development Kit - Spartan-3E 1600E Edition

www.xilinx.com UG258 (v1.3) November 30, 2007

Chapter 1: MicroBlaze Development Kit - Getting Started R

Quick Start Information

The following section is provided to help the user get up and running with the

development kit quickly. It contains basic instructions and requirements to get started with

the development kit without having to read the entire manual. This is recommended for

users familiar with Xilinx products. For a user that is new to Xilinx products, it is

recommended that the user read the rest of this document as it contains more detailed

information and instructions on the resources included in this development kit.

Step 1 - Install the ISE 9.2i WebPack or ISE 9.2i Foundation and Xilinx Platform Studio™

(XPS/EDK) software. Please make sure to install the necessary software as indicated

below:

•ISE 9.2i WebPack or ISE 9.2i Foundation, including Service Pack 3

•EDK 9.2i, including Service Pack 1

The Software Service packs can be downloaded from the Xilinx website at the following

location:

http://www.xilinx.com/xlnx/xil_sw_updates_home.jsp?update=sp

Step 2 - Set up the development board and connect it to the host machine. This includes

connecting the following:

•Board power supply

•Download cable - host to target

•Null modem serial cable - host to target

•Cross-over ethernet cable - host to target

Detailed instructions of how to accomplish these tasks are found later in this document.

Step 3 - Choose the reference system or demonstration of choice. Demonstrations are

located in the Xilinx Platform Flash and the Intel StrataFlash on the development board.

These demonstrations are selected by changing the configuration mode jumpers. The

following demonstrations are pre-loaded on the development board:

•Hello World Demonstration - Master Serial configuration mode

•μClinux Demonstration - BPI Up configuration mode

Note: To get access to the EDK 9.1 μClinux source files please send email to

[email protected].

The BlueCat Linux reference system for this kit is available from the Xilinx website at the

following location:

http://www.xilinx.com/bvdocs/desfiles/ug258.zip

In addition to the demonstrations, the Development Kit website also has the source files

for the following reference system:

♦sp3e1600e_mb_HelloWorld – contains the bit file and HyperTerminal setup file

for this demonstration

♦sp3e1600e_mb_BlueCatLinux – contains the XPS source project for the BlueCat

Linux reference system

This design can be downloaded from the provided link. Once downloaded, extract the ZIP

file to the local machine. Then invoke Xilinx Platform Studio (XPS) and open the project

file.

www.BDTIC.com/XILINX

Autres manuels pour MIcroBlaze Development Spartan-3E 1600E Kit

Table des matières

Autres manuels Xilinx Microcontrôleur

Xilinx

Xilinx Virtex-7 FPGA VC7222 IBERT Manuel utilisateur

Xilinx

Xilinx Virtex-5 LXT Manuel utilisateur

Xilinx

Xilinx Spartan 6 FPGA Manuel utilisateur

Xilinx

Xilinx MIcroBlaze Development Spartan-3E 1600E Kit Manuel utilisateur

Xilinx

Xilinx Virtex-5 FPGA ML561 Manuel utilisateur

Xilinx

Xilinx ML410 Manuel utilisateur

Xilinx

Xilinx VCU1525 Manuel utilisateur

Xilinx

Xilinx ZC702 Manuel utilisateur

Xilinx

Xilinx Virtex-4 ML455 Manuel utilisateur

Xilinx

Xilinx Virtex-4 FX12 Manuel utilisateur

Xilinx

Xilinx LogiCORE MicroBlaze Manuel utilisateur

Xilinx

Xilinx MicroBlaze Manuel utilisateur

Xilinx

Xilinx VCU110 Manuel utilisateur

Xilinx

Xilinx Virtex-II Pro PPC405 Manuel utilisateur

Xilinx

Xilinx MIcroBlaze Development Spartan-3E 1600E Kit Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur