Xerox Phaser 7750 Manuel utilisateur

Phaser® 7750 Color Laser Printer

3-32

Macintosh

This topic includes:

■"Requirements" on page 3-32

■"Quick CD-ROM Install Steps" on page 3-32

■"Enabling and Using EtherTalk for Mac OS 9.x" on page 3-32

■"Enabling and Using TCP/IP for Mac OS 9.x" on page 3-33

■"Enabling and Using TCP/IP or AppleTalk for Mac OS X, Version 10.1 or Higher" on

page 3-35

■"Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Versions 10.1 and 10.2)" on

page 3-36

Requirements

■A workstation with the appropriate printer driver installed.

■A working knowledge of the operating system (System 9.0+ or higher) being used on the

workstation.

■Proper cabling to connect the printer to the network.

Quick CD-ROM Install Steps

1. Insert the Printer Installer and Utilities CD-ROM into the computer’s CD-ROM drive.

2. Double-click the installer on the Printer Installer and Utilities CD-ROM to install the

printer driver.

Enabling and Using EtherTalk for Mac OS 9.x

If you use EtherTalk, Macintosh computers do not require IP addresses.

1. Open the AppleTalk Control Panel. Verify that the Ethernet port is the selected network

port.

2. Open the Chooser, then click the LaserWriter printer driver.

3. Select the printer.

4. Click Create to create the desktop printer.

Macintosh

Phaser® 7750 Color Laser Printer

3-33

Enabling and Using TCP/IP for Mac OS 9.x

This section provides installation and troubleshooting steps for Macintosh OS 9.x.

Setting Up the Macintosh Ethernet Port for TCP/IP

Perform the following procedure to set up your Macintosh TCP/IP:

1. Click Control Panels from the Apple menu.

2. Click TCP/IP.

3. Click Ethernet from the Connect via menu.

4. Specify one of the following methods for the Macintosh to obtain its IP address:

■Manually

■DHCP

Note

If you select to set up the printer manually, specify the IP address in the dialog box.

You must also enter information for the Subnet Mask, Router Address, and Name

Server Address, if needed

5. Close the dialog box.

Creating an LPR Printer with LaserWriter 8.5.1 or Higher

1. Open the Desktop Printer Utility. (This utility, or an alias to it, can be found in the

PhaserTools folder.)

2. Click Printer (LPR) in Create Desktop, then click OK.

3. Click Change in the PostScript Printer Description (PPD) file.

4. Select the appropriate PPD from the list, then click Select. If your printer’s PPD is not

listed, install it from the Printer Installer and Utilities CD-ROM.

5. Click Change in LPR Printer Selection.

6. Enter information in the following fields:

■Printer Address: Enter the printer's IP address or domain name.

■Queue: Enter PS (use upper-case), then click OK.

7. Close the dialog box. When prompted, click Save.

8. Enter a name for the desktop printer in Save Desktop Printer As field, then click Save.

9. Two methods are available for printing through LPR:

■Use the new Desktop Printer (LPR)

■Use the LaserWriter 8.5.1 printer driver (any printer can be selected). Click File, then

click Print to select the appropriate LPR printer in the Printer drop-down list.

Macintosh

Phaser® 7750 Color Laser Printer

3-34

Creating an AppSocket Printer with LaserWriter 8.6

Xerox provides Macintosh AppSocket printing with PhaserPort for Mac OS on the printer’s

Printer Installer and Utilities CD-ROM. PhaserPort for Mac OS provides a bi-directional,

high-speed communications channel using the new plug-in communication architecture of

Apple LaserWriter version 8.6.

AppSocket provides feedback about print job status which is not available through LPR.

PhaserPort for Mac OS System Requirements

Note

PhaserPort is not supported under Mac OS X.

System requirements include:

■A Phaser printer installed on a TCP/IP network

■PowerPC-based Macintosh

■Apple's LaserWriter version 8.6 or later, with Desktop Printing enabled

■Open Transport version 1.1 or later networking. TCP/IP networking provided by MacTCP

software is not supported. The Macintosh must be properly configured to communicate

with the printer.

Creating a Desktop Printer with PhaserPort for Mac OS

1. Launch the PhaserPort Printer Tool.

2. Enter the printer’s IP address or DNS name in the Printer Internet Address field.

3. Enter a name for the desktop printer in the Desktop Printer Name field.

4. Click Verify to contact the printer over the TCP/IP network, then verify its network

configuration.

5. Click Create to create the desktop printer.

6. Click Quit to exit the PhaserPort Printer Tool.

7. In the Finder, click the newly created desktop printer icon.

8. Click Change Setup in the Finder’s Printing menu.

9. Select the PostScript Printer Description file and provide configuration information.

You can also select the Auto Setup button, then Macintosh automatically attempts to

determine the correct settings for the Phaser printer.

Note

Certain utilities, such as Adobe Font Downloader, are not compatible with PhaserPort for

Mac OS software because they attempt to directly communicate with the printer using the

AppleTalk protocol. If you use Mac OS software, create an AppleTalk desktop printer,

then delete this printer after running and exiting the non-compatible software.

Macintosh

Phaser® 7750 Color Laser Printer

3-35

Enabling and Using TCP/IP or AppleTalk for Mac OS X, Version

10.1 or Higher

Requirements

Verify that you are running Mac OS X, version 10.1. The previous versions of Mac OS X do

not fully support PostScript printing and printer features.

Setting up the Macintosh Ethernet Port for TCP/IP or AppleTalk

Perform the following procedure to set up your Macintosh for TCP/IP:

1. Select Network from the System Preferences application, then select TCP/IP.

2. Select Built-In Ethernet from the Active Ports menu.

3. Specify how you will obtain the IP address from the TCP/IP tab:

■Manually: Specify the IP address, Subnet Mask, Router Address, and Name Server

Address in the dialog box.

■DHCP: Automatically finds the IP address.

■AppleTalk: Select the AppleTalk tab, then verify that the Make AppleTalk Active

box is selected.

4. Close the dialog box.

Creating an LPR Printer with Mac OS X, Version 10.1 or Higher

1. Open the Print Center utility. (This utility is found in a directory called Utilities in the

Applications directory.)

2. Select Add Printer, then select LPR Printers Using IP from the pull-down menu.

3. Enter the printer's IP address or host name in the LPR Printer’s Address field.

4. Enter PS (use upper-case) in the Queue field, then click OK.

5. Select the appropriate PPD from the list in the Printer Model drop-down list. If your

printer’s PPD is not listed, install it from the Printer Installer and Utilities CD-ROM.

6. Click Add to complete the configuration.

Creating an AppleTalk Printer with Mac OS X, Version 10.1 or Higher

1. Verify that AppleTalk is enabled in System Preferences.

2. Open the Print Center utility. (This utility is found in a directory called Utilities in the

Applications.)

3. Select Add Printer, then select AppleTalk from the pull-down list.

4. Select the appropriate zone.

5. Select your printer from the list provided.

6. Select the appropriate PPD from the list in the Printer Model drop-down list. If your

printer’s PPD is not listed, install it from the Printer Installer and Utilities CD-ROM.

7. Click Add to complete the configuration.

Macintosh

Phaser® 7750 Color Laser Printer

3-36

Creating a Rendezvous Printer with Mac OS X, Version 10.2 or Higher

1. Open the Print Center utility (located in Utilities in the Applications Directory).

2. Click Add.

A list appears displaying your printer’s name, followed by a series of numbers. For

example, Your Printer’s Name xx:xx:xx. Each numbered segment represents the last

section of your printer’s hardware address. Your PPD is automatically selected.

3. Click Add to complete the installation.

Macintosh Troubleshooting (Mac OS 9.x, Mac OS X, Versions

10.1 and 10.2)

The following procedure eliminates cabling, communication, and connection problems. Once

you complete these steps, print a test page from your software application. If the job prints, no

further system troubleshooting is necessary. If there are print quality problems, go to

Reference/Troubleshooting on the User Documentation CD-ROM.

Macintosh Troubleshooting Step-By-Step

Mac OS 9.x

Perform these steps only for Mac OS 9:

1. Open the Chooser, then click the LaserWriter driver.

2. Do one of the following:

■If the printer name appears, your printer is communicating through the network. You

do not need to perform any additional steps.

■If your printer name does not appear, proceed to Step 3.

3. Verify that the printer is plugged in, turned on, and connected to an active network.

4. Verify the cable connection from the network to the printer.

5. Follow these steps:

a. From the printer’s front panel, verify that EtherTalk is enabled. If it is not, enable it in

the front panel, then reset the printer.

b. Print the “Configuration Page” and verify that EtherTalk is enabled.

c. From the “Configuration Page”, verify the Zone. If you have multiple zones on your

network, verify that your printer appears in the desired zone.

6. If you are still unable to print, go to www.xerox.com/office/support or access

PhaserSMART Technical Support through CentreWare Internet Services:

a. Launch your web browser.

b. Enter your printer's IP address in the browser’s Address field (http://

xxx.xxx.xxx.xxx).

c. Select Support.

d. Click the PhaserSMART Diagnostic Tool link to access PhaserSMART.

Macintosh

Phaser® 7750 Color Laser Printer

3-37

Mac OS X, Versions 10.1 and 10.2

Perform these steps only for Mac OS X, versions 10.1 and 10.2:

1. Open the Network Utility, then click the Ping tab.

2. Enter your printer’s IP address.

3. Click Ping. If you do not get a response, confirm that your TCP/IP settings are correct for

both your printer and computer.

4. For AppleTalk, follow the steps below. For TCP/IP proceed to Step 5.

a. From the printer’s front panel, verify that EtherTalk is enabled. If it is not, enable it in

the front panel, then reset the printer.

b. Print the “Configuration Page” and verify that EtherTalk is enabled.

c. From the “Configuration Page”, verify the Zone. If you have multiple zones on your

network, verify that your printer appears in the desired zone.

5. If you are still unable to print, go to www.xerox.com/office/support or access

PhaserSMART Technical Support through CentreWare Internet Services:

a. Launch your web browser.

b. Enter your printer's IP address in the browser’s Address field (http://

xxx.xxx.xxx.xxx).

c. Select Support.

d. Click the PhaserSMART Diagnostic Tool link to access PhaserSMART.

Autres manuels pour Phaser 7750

Table des matières

Autres manuels Xerox Imprimante

Xerox

Xerox ColorQube 8580 Manuel d'utilisation

Xerox

Xerox DocuColor 2045 Manuel utilisateur

Xerox

Xerox DocuColor 5252 Manuel de la liste des pièces

Xerox

Xerox DocuPrint 525/1050 Manuel utilisateur

Xerox

Xerox 3150 - Phaser B/W Laser Printer Manuel utilisateur

Xerox

Xerox DocuMate 5445 Manuel utilisateur

Xerox

Xerox 4250 - WorkCentre - Copier Instructions et recettes

Xerox

Xerox 3130 - Phaser B/W Laser Printer Manuel utilisateur

Xerox

Xerox PHASER 6250 Guide de démarrage rapide

Xerox

Xerox 7760DN - Phaser Color Laser Printer Manuel utilisateur

Xerox

Xerox 3600DN - Phaser B/W Laser Printer Manuel technique

Xerox

Xerox Phaser 860 Manuel utilisateur

Xerox

Xerox Phaser 2135 Manuel utilisateur

Xerox

Xerox ColorQube 8580 Manuel utilisateur

Xerox

Xerox WorkCentre3325 Manuel

Xerox

Xerox Phaser 6140N Manuel utilisateur

Xerox

Xerox Phaser 4510 Manuel d'utilisation

Xerox

Xerox Phaser 6120 Instructions d'utilisation et de sécurité

Xerox

Xerox 6130N - Phaser Color Laser Printer Manuel utilisateur

Xerox

Xerox PHASER 3500 Manuel utilisateur

Xerox

Xerox Wide Format IJP 2000 Manuel utilisateur

Xerox

Xerox DocuPrint 96 Manuel technique

Xerox

Xerox DocuColor 8000 Mise à jour du firmware

Xerox

Xerox C8 - DocuPrint Color Inkjet Printer Mode d’emploi

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur