Wood-Mizer SW Setworks – A quick reference guide for common functions. Keep near the sawmill for easy reference. Always reference your manual for detailed instructions.
Pattern Mode (Manual) - Cutting dierent sizes
Position blade to top of log
Press (P-1 light activates)
Enter desired size
of bottom board.
Press & enter next
board size. Repeat.
Press to move to starting
height
Save program
Cut
Cutting Modes
Using ABC Programs
Tips
Press & hold desired program
- After nishing a cutting program, press “Exit” to raise the
head for the next log.
- During a program, if you want to use the up/down lever
for manual control over bump up, press “Kerf” button.
A, B, or C
(StrPro is displayed)
Use arrows to select
rst cutting position.
Optional: Change any size.
Press to move to
starting height
Save
Pattern Mode (Quick Program) - Cutting same sizes
Position blade to top of log
Enter desired board size.
Press (StrPro light activates)
Optional: Use arrows to select
board size to change.
Enter a new size.
Move to starting height
Save program
Cut
Remote Mode
Press to activate
or deactivate
Use up/down lever for next cut/bump up.
Cut
Cut
Normal Cutting Mode
Enter board size.
OR use stored board
size in A, B, or C.
Press
Buttons and their Functions
Board size memory buttons.
Program memory buttons.
Conrming a program.
Setting head return height.
Activating Manual Program
mode.
Moving items up.
Activating Quick Program
mode. Moving items down.
Set real distance between the
blade and the sawmill bed.
Deleting a program.
Exit an active function.
Automatically raises head to
clear the cant when returning.
Automatically lowers head.
Storing entered values.
Set blade kerf value.
Remote mode on/o.
Auto-calibration.
Set the input divider value.
