Wiznet WizFi360-CON Manuel utilisateur
Getting Started
#Overview
WizFi360-CON WizFi360-PA
WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with
IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate can
be up to 2Mbps, which can meet the requirement of various applications.
#Features
WiFi 2.4G, 802.11 b/g/n
Support Station / SoftAP / SoftAP+Station operation modes
Support “Data pass-through” and “AT command data transfer” mode
Support serial AT command configuration
Support TCP Server / TCP Client / UDP operating mode
Support configuration of operating channel 0 ~ 13
Support auto 20MHz / 40MHz bandwidth
Support WPA_PSK / WPA2_PSK encryption
Serial port baud rate up from 600bps to 2Mbps with 16 common values
Support up to 5 TCP / UDP links
Obtaining IP address automatically from the DHCP server (Station mode)
DHCP service for Wireless LAN clients (AP mode)
Support DNS for communication with servers by domain name
Support “Keep-Alive” to monitor TCP connection
Support “Ping” for monitoring network status
Built-in SNTP client for receiving the network time
Support built-in unique MAC address and user configurable
Support firmware upgrade by UART Download / OTA (via WLAN)
Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
CE, FCC certification
#Details
Documents
Datasheet : A brief introduce about WizFi360. These documents describe the Features, package
information and etc.
AT Instruction set: It describes the AT Command of WizFi360 and you can confirm the return message
by AT command of WizFi360.
AT command Example: It includes the Basic example using AT command and it is examples of TCP,
UDP, SSL use.
Quick Start Guide: The examples using the WizFi360-EVB or WizFi360io, it describes the scenarios in
order from Hardware setting to example of AT command use
Resources
DataSheet provides a brief introduce about WizFi360. These documents describe the Features,package
information and etc.
Program Guide provides the AT Instruction set and AT command examles. The AT Instruction document
include the description of AT command and the AT command examples document include TCP/UDP/SSL
connection result and AT command used example.
AT Command Comparison Sheet provides comparison with ESP8266 AT command.
#DataSheet
#WizFi360
WizFi360 Datasheet v1.05
2019-12-11 V1.05
Edited “5. Pin Definitions”
No.11 & No.19
Old Datasheet History
#WizFi360-EVB-Shield
WizFi360-EVB-Shield Datasheet
Version Date Decription
V 1.1.2 SEP2019 Initial Release
#WizFi360-EVB-Mini
WizFi360-EVB-Mini Datasheet
Version Date Decription
V 1.0.0 SEP2019 Initial Release
#WizFi360io Series
#WizFi360io-C
WizFi360io-C Datasheet
Version Date Decription
V 1.0.2 SEP2019 Initial Release
#WizFi360io-H
WizFi360io-H Datasheet
Version Date Decription
V 1.0.1 AUG2019 Initial Release
#Certification
#CE
WizFi360 Certification
Date Decription
AUG2019 Initial Release
#FCC
WizFi360 Certification
Date Decription
AUG2019 Initial Release
#KC
WizFi360-PA_EMC Certification
WizFi360-CON_EMC Certification
Date Decription
NOV2019 Initial Release
#J-MIC(TELEC)
WizFi360-PA_EMC Certification
WizFi360-CON_EMC Certification
Date Decription
NOV2019 Initial Release
#RoHS
SGS RoHS Test Report
Date Decription
NOV2019 Initial Release
#RoHS
SGS REACH SVHC Test Report
Date Decription
NOV2019 Initial Release
#Reliability Test Report
KORAS Operation Test - Korean
KORAS Operation Test - English
KORAS Operation Test - Korean
KORAS Operation Test - Korean
Date Decription
NOV2019 Initial Release
#Program Guide
#AT Instruction set
The AT Instruction set include the description of AT command. WizFi360 basically provides a command
compatible with ESP8266. In addition, commands are provided for using MQTT and Azure IoT Hub.
AT Instruction set V1.0.7 - English
AT Instruction set V1.0.7 - Korean
Version Date Decription
V 1.0.7 MAR2020 Add AT+WIZ_NETCONFIG, Modify AT+CWSTARTSMART
Modify minor typos and error
Old Datasheet History
#AT Command Comparison Sheet
The AT Command Comparison Sheet provides comparison with ESP8266 AT command.
AT Command Comparison Sheet V1.0.1
Version Date Decription
V1.0.0 AUG2019 Initial Release
V1.0.1 OCT2019 Modify AT+CIPSSLCCONF
Add AT+AZCON, AT+AZSET and AT+CASEND command
#AT Command examples
The AT command examples document include TCP/UDP/SSL connection result and AT command used
example.
AT Command Examples V1.0.3 - English
AT Command Examples V1.0.3 - Korean
Version Date Decription
V1.0.3 OCT2019 Add “Auto TCP Connection on Transparent Mode”
Old Datasheet History
#Hardware Design Guide
Hardware Design Guide
Version Date Decription
V1.0.3 NOV2019 Initial Release
WizFi360-EVB-Shield
#Overview
This document describes WizFi360-EVB-Shield. WizFi360-EVB-Shield is a development board for experiment, test and verification of WizFi360.
WizFi360-EVB-Shield can also be used as an Arduino shield. WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is
compatible with IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate can be up to 2Mbps,
which can meet the requirement of various applications.
#Features
WizFi360
WiFi 2.4G, 802.11 b/g/n
Support Station / SoftAP / SoftAP+Station operation modes
Support “Data pass-through” and “AT command data transfer” mode
Support serial AT command configuration
Support TCP Server / TCP Client / UDP operating mode
Support configuration of operating channel 0 ~ 13
Support auto 20MHz / 40MHz bandwidth
Support WPA_PSK / WPA2_PSK encryption
Serial port baud rate up from 600bps to 2Mbps with 16 common values
Support up to 5 TCP / UDP links
Obtaining IP address automatically from the DHCP server (Station mode)
DHCP service for Wireless LAN clients (AP mode)
Support DNS for communication with servers by domain name
Support “Keep-Alive” to monitor TCP connection
Support “Ping” for monitoring network status
Built-in SNTP client for receiving the network time
Support built-in unique MAC address and user configurable
Support firmware upgrade by UART Download / OTA (via WLAN)
Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
CE, FCC certification
ETC
Built-in UART to USB chip
CP2104-GM
Micro USB B Type Connector
UART Selector
JP1, JP2, JP3
2.54mm Pin Header
Built-in Sensors
Temprature/Humidity Sensor: DHT11
CDS Sensor: GL5537
Built-in Tact Switchs
System Reset Switch: S1
WiFi Reset Switch: S2
Built-in LED Indicators
D13 LED
Built-in Level Shifters
The voltage of the RXD/TXD signal changes according to the main board platform voltage.
Built-in DIP Switchs
UART RXD/TXD Selector: SW1
UART RTS/CTS Selector: SW2
Sensor/RESET Pins Selector: SW3
#Quick Start Guide
Quick Start Guide
#Datasheet
Download
#Technical Reference
#Ref Schematic & Other Board Schematics
Link to Github
#Library
Link to Github
#ETC
#Serial Port Driver
CP210x USB to UART Bridge VCP Drivers
#Sensor Datasheets
DHT11 Humidity & Temperature Sensor Datasheet
GL5537 Datasheet
WizFi360-EVB-Mini
#Overview
This document describes WizFi360-EVB-Mini. WizFi360-EVB-Mini is a compact development board for
experiment, test and verification of WizFi360. WizFi360-EVB-Mini is the same form factor as the NodeMCU
V2. WizFi360 is a low cost and low-power consumption industrial-grade WiFi module. It is compatible with
IEEE802.11 b/g/n standard and supports SoftAP, Station and SoftAP+Station modes. The serial port baud rate
can be up to 2Mbps, which can meet the requirement of various applications.
#Feature
WizFi360
WiFi 2.4G, 802.11 b/g/n
Support Station / SoftAP / SoftAP+Station operation modes
Support “Data pass-through” and “AT command data transfer” mode
Support serial AT command configuration
Support TCP Server / TCP Client / UDP operating mode
Support configuration of operating channel 0 ~ 13
Support auto 20MHz / 40MHz bandwidth
Support WPA_PSK / WPA2_PSK encryption
Serial port baud rate up from 600bps to 2Mbps with 16 common values
Support up to 5 TCP / UDP links
Obtaining IP address automatically from the DHCP server (Station mode)
DHCP service for Wireless LAN clients (AP mode)
Support DNS for communication with servers by domain name
Support “Keep-Alive” to monitor TCP connection
Support “Ping” for monitoring network status
Built-in SNTP client for receiving the network time
Support built-in unique MAC address and user configurable
Support firmware upgrade by UART Download / OTA (via WLAN)
Industrial grade (operating temperature range: -40 ° C ~ 85 ° C)
CE, FCC certification
ETC
Built-in UART to USB chip
CP2104-GM
Micro USB B Type Connector
#Quick Start Guide
Quick Start Guide
#Datasheet
Download
#Technical Reference
#Ref Schematic & Other Board Schematics
Link to Github
#Library
Link to Github
#ETC
#Serial Port Driver
CP210x USB to UART Bridge VCP Drivers
WizFi360io
#Overview
This page describes the io interface boards using WizFi360. WizFi360io series boards can be customized
according to customers' requests.
#WizFi360io-C
WizFi360io-C cable connector type io interface board. The operating voltage of the WizFi360io-C and the
UART voltage are 5V. WizFi360io-C can connect the UART interface to the connector. The part name of the
connector mounted on WizFi360io-C is “SMW200-06”. The cable connector that can be connected to
“SMW200-06” is “SMH200-06”.
#WizFi360io-H
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Wiznet Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
