Winmate ID30 Manuel utilisateur

ID30 Motherboard

3.5”Fanless SBC w/Intel Atom

D2700 2.13GHz Processor, VGA,

LVDS, Dual Giga Ethernet, and

Mini-PCIe Interface.

USER MANUAL Version 1.0

ID30 Motherboard User Manual

FCC Statement

This device complies with part 15 FCC rules. Operation is subject to

the following two conditions：

This device may not cause harmful interference.

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class "a"

digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at him

own expense.

ID30 Motherboard User Manual

III

No part of this document may be reproduced, copied, translated, or transmitted in any

form or by any means, electronic or mechanical, for any purpose, without the prior

written permission of the original manufacturer.

Trademark Acknowledgement

Brand and product names are trademarks or registered trademarks of their respective

owners.

Disclaimer

We reserve the right to make changes, without notice, to any product, including

circuits and/or software described or contained in this manual in order to improve

design and/or performance. We assume no responsibility or liability for the use of the

described product(s), conveys no license or title under any patent, copyright, or masks

work rights to these products, and makes no representations or warranties that these

products are free from patent, copyright, or mask work right infringement, unless

otherwise specified. Applications that are described in this manual are for illustration

purposes only. Winmate Communication Inc. makes no representation or warranty

that such application will be suitable for the specified use without further testing or

modification.

Warranty

We warrant that each of its products will be free from material and workmanship

defects for a period of one year from the invoice date. If the customer discovers a

defect, We will, at its option, repair or replace the defective product at no charge to

the customer, provided it is returned during the warranty period of one year, with

transportation charges prepaid. The returned product must be properly packaged in its

original packaging to obtain warranty service.

If the serial number and the product shipping data differ by over 30 days, the

in-warranty service will be made according to the shipping date. In the serial numbers

the third and fourth two digits give the year of manufacture, and the fifth digit means

the month (e. g., with A for October, B for November and C for December).

For example, the serial number 1W11Axxxxxxxx means October of year 2011.

ID30 Motherboard User Manual

Packing List

Before using this Motherboard, please make sure that all the items listed below are

present in your package：

ID30 Motherboard

User Manual

HDD SATA Cable

User‘s Manual & Driver CD

If any of these items are missing or damaged, contact your distributor or sales

representative immediately.

Customer Service

We provide service guide for any problem as follow steps：The first, contact with

your distributor, sales representative, or our customer service center for technical

support if you need additional assistance. You may have the following information

ready before you call：

Product serial number

Peripheral attachments

Software (OS, version, application software, etc.)

Description of complete problem

The exact wording of any error messages

In addition, free technical support is available from our engineers every business day.

We are always ready to give advice on application requirements or specific

information on the installation and operation of any of our products. Please do not

hesitate to call or e-mail us.

ID30 Motherboard User Manual

Safety Precautions

Warning!

Always completely disconnect the power cord from your chassis

whenever you work with the hardware. Do not make connections

while the power is on. Sensitive electronic components can be

damaged by sudden power surges. Only experienced electronic

personnel should open the PC chassis.

Caution!

Always ground yourself to remove any static charge before

touching the CPU card. Modern electronic devices are very

sensitive to static electric charges. As a safety precaution, use a

grounding wrist strap at all times. Place all electronic components

in a static-dissipative surface or static-shielded bag when they are

not in the chassis.

ID30 Motherboard User Manual

Safety and Warranty

1. Please read these safety instructions carefully.

2. Please keep this user's manual for later reference.

3. Please disconnect this equipment from any AC outlet before cleaning. Do not use

liquid or spray detergents for cleaning. Use a damp cloth.

4. For pluggable equipment, the power outlet must be installed near the equipment

and must be easily accessible.

5. Keep this equipment away from humidity.

6. Put this equipment on a reliable surface during installation. Dropping it or letting

it fall could cause damage.

7. The openings on the enclosure are for air convection. Protect the equipment from

overheating. DO NOT COVER THE OPENINGS.

8. Make sure the voltage of the power source is correct before connecting the

equipment to the power outlet.

9. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

10. All cautions and warnings on the equipment should be noted.

11. If the equipment is not used for a long time, disconnect it from the power source

to avoid damage by transient over-voltage.

12. Never pour any liquid into an opening. This could cause fire or electrical shock.

13. Never open the equipment. For safety reasons, only qualified service personnel

should open the equipment.

14. If any of the following situations arises, get the equipment checked by service

personnel:

A. The power cord or plug is damaged.

B. Liquid has penetrated into the equipment.

C. The equipment has been exposed to moisture.

D. The equipment does not work well, or you cannot get it to work according to

the user‘s manual.

E. The equipment has been dropped and damaged.

F. The equipment has obvious signs of breakage.

15. Do not leave this equipment in an uncontrolled environment where the storage

temperature is below -20° C (-4°F) or above 60° C (140° F). It may damage the

equipment.

ID30 Motherboard User Manual

VII

Revision History

Version

Date

Note

Author

1.0

2011.12.16

Initial Draft

Henry Hsu

ID30 Motherboard User Manual

VIII

Contents

CHAPTER 1 GENERAL INFORMATION.......................................2

1.1 INTRODUCTION ...............................................................................2

1.2 FEATURE .........................................................................................2

1.3 MOTHERBOARD SPECIFICATIONS ....................................................3

1.4 FUNCTION BLOCK...........................................................................4

1.5 BOARD DIMENSIONS........................................................................5

CHAPTER 2 INSTALLATIONS.........................................................7

2.1 MEMORY MODULE（SO-DIMM）INSTALLATION .........................7

2.2 I/O EQUIPMENT INSTALLATION .......................................................8

2.3 JUMPERS AND CONNECTORS ...........................................................9

2.4 JUMPER SETTING...........................................................................11

2.5 CONNECTORS AND PIN ASSIGNMENT ............................................13

CHAPTER 3 GRAPHIC DRIVER INSTALLATION....................20

3.1 STANDARD CMOS FEATURE...............................................................20

3.2 PANEL RESOLUTION SETTING............................................................24

CHAPTER 4 CHIPSET DRIVER INSTALLATION .....................27

4.1 STANDARD CMOS FEATURES...........................................................27

CHAPTER 5 ETHERNET DRIVER INSTALLATION..................31

INSTALLATION OF ETHERNET DRIVER .......................................................31

CHAPTER 6 AUDIO DRIVER INSTALLATION..........................35

6.1 INTRODUCTION .................................................................................35

6.2 INSTALLATION OF AUDIO DRIVER .................................................35

CHAPTER 7 AMI BIOS SETUP......................................................42

7.1ADVANCED SETTING ..........................................................................43

ID30 Motherboard User Manual

General Information

This chapter includes the ID30 Motherboard background

information.

Sections include:

Introduction

Feature

Motherboard Specification

Function Block

Board Dimensions

C H A P T E R

ID30 Motherboard User Manual

Chapter 1 General Information

1.1 Introduction

The ID30 SBC is integrated with Intel®NM10 express chipset, 17x17mm,

and Atom D2700 Processor. Intel Atom Processor with 32nm low power

design enables down to 50% less average power consumption and the

chipset delivers up to 4x improvement in graphics performance and

enables up to 50% higher data transfer bus speed rate.

In peripheral connectivity, ID30 SBC features with Mini-PCIe I/O ports,

one Serial ATA connectors, four Serial Port (One Connector; Three Pin

Header ) and Six Hi-Speed USB 2.0 connectors( Two Connector ; Four Pin

Header ) .Additionally, ID30 SBC build-in a 12V DC-IN power adapter.

Thus, the ID30 SBC is designed to satisfy most of the applications in the

industrial computer market, such as Gaming, POS, KIOSK, Industrial

Automation, and Programmable Control System. It is a compact design to

meet the demanding performance requirements of today‘s business and

industrial applications.

1.2 Feature

3.5-inch Form Factor ( 146mm x 102mm)

Supports Intel®Atom D2700 2.13GHz processor

System memory up to 4GB DDR3 800/1066, SO-DIMM

Intel NM10 Chipset

Intel®Graphic Accelerator 3650 Integrated Graphics Engine.

Dual Broadcom BCM57780 GbE controller

2 x Mini PCIe(one for wireless, one for SATA SSD), 4 X COM, 6 x

USB2.0, 1 x SATA, 8 x GPIO ports, 1 x DVI

Table des matières

Autres manuels Winmate Carte mère

Winmate

Winmate IK70 Manuel utilisateur

Winmate

Winmate I771 Manuel utilisateur

Winmate

Winmate IK32 Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Winmate

Winmate I330 Manuel utilisateur

Winmate

Winmate IB32 Manuel utilisateur

Winmate

Winmate IF70 Mini-ITX SBC Manuel utilisateur

Winmate

Winmate IH32 Manuel utilisateur

Winmate

Winmate ID31 Manuel utilisateur

Winmate

Winmate OMIW Manuel utilisateur

Winmate

Winmate IP70 Manuel utilisateur

Winmate

Winmate A831 Manuel utilisateur

Winmate

Winmate IV70 Manuel utilisateur

Winmate

Winmate FA30-210 Manuel utilisateur

Winmate

Winmate IB70 Manuel utilisateur

Winmate

Winmate IV70 Manuel utilisateur

Winmate

Winmate FA30-200 Manuel utilisateur

Winmate

Winmate IB70 Manuel utilisateur

Winmate

Winmate IK70 Manuel utilisateur

Winmate

Winmate IP32S Manuel utilisateur

Winmate

Winmate IH70 Manuel utilisateur

Winmate

Winmate I370 Manuel utilisateur

Winmate

Winmate IT70 Manuel utilisateur

Winmate

Winmate IK32 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur