WIN Enterprises PC/104-PLUS Manuel utilisateur
1
User’s Manual
Version 1.2
PC/104-PLUS Module
Model Number MB-73030
AMD Geode LX800 Low Power PC/104+ SBC with VGA/LCD, Two 10/100 LAN,
Audio & SSD
2
Table of Contents
Chapter 1. General Information ......................................................................3
1-1. Introduction..............................................................................................3
1-2. Specification.............................................................................................3
1-3. MB-73030 Package...................................................................................4
1-4. Board Layout............................................................................................5
1-5. Board Dimension .....................................................................................6
Chapter 2. Installation .....................................................................................8
2-1. Location of Connectors...........................................................................8
2-2. List of Connectors ...................................................................................8
2-3. Location of Jumpers................................................................................9
2-4. List of Jumpers ........................................................................................9
2-5. Connector Pin Assignment and Jumper Settings...............................10
Chapter 3. BIOS Setup......................................................................................18
3.1 Quick Setup .............................................................................................18
3.2 Entering the CMOS Setup Program.......................................................18
3.3 Menu Options ..........................................................................................19
3.4 Advanced BIOS Features Setup.............................................................22
3.5 Advanced Chipset Features Setup ........................................................24
3.6 Integrated Peripherals Setup .................................................................24
3.7 Power Management Setup......................................................................30
3.8 PNP/PCI Configuration ...........................................................................31
3.9 PC Health Status .....................................................................................33
3.10 Load Fail-Safe Defaults.........................................................................34
3.11 Load Optimized Defaults.......................................................................35
3.12 Supervisor/User Password...................................................................35
Appendix A: Programming the Watchdog Timer ...........................................38
Appendix B: System Resource........................................................................40
Appendix C: Installing CompactFlash Memory..............................................42
Appendix D: Cable List.....................................................................................43
3
Chapter 1. General Information
1-1. Introduction
The MB-73030 is a full function of the PC/104+ embedded format SBC board using the
AMD CS5536 chipset, it supports the AMD LX800 500 MHz processor. The MB-73030
supports CRT, 24-bit TFT panels, one Ultra ATA-66 IDE devices, one CF socket, the
Dual Intel® 82551ER Ethernet chipset and an AC-97 Audio Interface.
The onboard features include one RS-232 and one RS-232/422/485 serial port, one
bi-directional parallel port, four USB 2.0 ports, also a watchdog timer and PC/104+
( both PCI & ISA) connector for flexible expansion capabilities. In addition, the onboard
SSD interface supports a 50-pin CompactFlash™ socket for TypeI/II CompactFlash
Cards and a memory support 200-pin DDR SO-DIM.
1-2. Specification
Specifications
General Functions
CPU AMD Geode LX800 processor
BIOS Insyde® 512KB Flash BIOS
Chipset AMD CS5536
I/O Chipset Winbond 83627HG
Memory One 200-pin DDR SO-DIMM socket support up to 1GB DDR
333/400 Memory
Enhanced IDE Support up to one Ultra ATA-66 IDE devices
Parallel port Support SPP/ECP/EPP
Serial port One RS-232 and one RS-232/422/485 serial ports.
IR interface Support one IrDATx/Rx header
KB/Mouse connector keyboard/ mouse pin-header
USB connectors Support four USB 2.0 ports( two on external Connector, two
on Pin-header)
Battery Lithium battery for data retention up to 10 years(in normal
condition)
Watchdog Timer Software programmable, 1-255 level
PC/104+ Connector PC/104+ connectors for both PCI & ISA
Power management APM 1.2 compliant
Flat Panel/CRT Interface
VGA Chipset AMD Geode LX-800
Display memory Share system memory 2~254MB
Display type Simultaneous supports CRT and 24-bit TFT LCD
Resolution CRT Resolution support up to 1920 x 1440 @ 32bpp or
1660 x1200 @ 32bpp CRT & LCD simultaneous: up to 1024
x 768 @ 18bpp (60Hz)
4
Ethernet Interface
Chipset Dual Intel 82551ER
Ethernet interface PCI 100/10 Mbps Ethernet controller
SSD Interface One 50-pin CompactFlash™ socket
Sound Adaptor (optional R-031)
Chipset OptionalAC 97 codec
Audio controller SoundBlaster Pro Hardware and Direct Sound Ready AC97
Digital Audio
Audio interface Mic in and Speaker out
Software Driver Supports for Windows 95, Windows 98 and windows NT
Mechanical and Environmental
Power supply voltage VCC (4.75V to 5.25V),
Max. power requirements +5 V @2.2A,
Operating
temperature 32 to 140°F (0 to 60°C)
Board size 95.9mm x115.6mm
Weight 0.6 lb. (0.3 Kg) Net Weight
1-3. MB-73030 Package
Please make sure that the following items have been included in the package before
installation.
MB-73030 PC/104+ Embedded SBC board
Quick Installation Guide
Cables
oIDE Cable
oCOM Cable
oPower Cable(ATX 20P)
oKB/Mouse Cable
oUSB Cable
oVGA Cable
oDual LAN Adaptor R051
oLAN Cable between R051 & MB-73030
CD-ROM which contains the following folders:
oManual (in PDF format)
oLAN Driver
oVGA Driver
oAudio Driver
oBIOS Utility
If any of these items are missing or damaged, please contact your dealer at once.
Save the shipping materials and carton for shipping or storage the board. After you
unpack the board, inspect it to assure an intact shipment. Press down all the
integrated circuits to make sure they are properly seated in their sockets. Do not apply
power to the board if it appears to have been damaged.
5
Leave the board in its original packing until you are ready to install
Precautions
Please make sure you properly ground yourself before handling the MB-73030 board or
other system components. Electrostatic discharge can be easily damage the
MB-73030 board.
Do not remove the anti-static packing until you are ready to install the MB-73030 board.
Ground yourself before removing any system component from it protective anti-static
packaging. To ground yourself, grasp the expansion slot covers or other unpainted
parts of the computer chassis.
Handle the MB-73030 board by its edges and avoid touching its component.
1-4. Board Layout
6
1-5. Board Dimension
Board Dimension (mm) (Component Side)
7
Board Dimension (mm) (Solder Side)
8
Chapter 2. Installation
2-1. Location of Connectors
2-2. List of Connectors
Connectors Description Connectors Description
CN1 Main Power Connector CN12 AC 97 Audio Connector
CN2 ATX Power Connector CN13 COM1 Connector (Pin Header)
CN3 IR Connector CN14 Flat Panel Inverter Connector
CN4 GPIO Connector CN15 LAN Connector
CN5 ATX Power Control Connector CN16 PC/104 Plus Connector( PCI)
CN6 Power LED /HDD
LED/Reset/Speak Out Connector CN17 PC/104 Connector
CN7 Flat Panel Connector CN18 IDE Connector 44pin
CN8 KB/Mouse Connector CN19 USB 1/2 Connector(Pin Header)
CN9 Auxiliary Power Connector CN20 USB 3/4 Connector(Pin Header)
CN10 COM2 Connector (Pin Header) CN21 Parallel Connector(Pin Header)
CN11 VGA Connector (Pin Header) CN22 COM2 –RS422/RS485 Connector
(Pin Header)
9
2-3. Location of Jumpers
2-4. List of Jumpers
Pin Define Pin Define
JP1 Memory Speed Selection JP6 Watchdog Select
JP2 LCD Panel Voltage Select JP7 COM2 RI/Voltage Select
JP3 AT/ATX Power Select(5VSB) JP8 Clear CMOS
JP4 AT/ATX Power Select JP9 COM1 RI/Voltage Select
JP5 CF Slave/Master JP10 COM2 RS-232/422/485 Selec
JP11 DDR 2.6V/2.5V Voltage Select
10
2-5.Connector Pin Assignment and Jumper Settings
CN1: Main Power Connector Pin Assignment
1 +5V
2 +5V
3 Ground
4 Ground
5 +12V
CN2: ATX Power Connector
Pin Assignment
1 5V Standby
2 Ground
3 PS_On
CN3: IR Connector
The IrDA connector (CN24) can be configured to support a wireless infrared module.
With this module and application software such as Laplink or a WIN95/98 direct cable
connection, you can transfer files to or from Loptops, Notebooks, PDAs, and printers.
This connector supports HPSIR (115.2kbps, 2 meters) and ASK-IR (56Kbps). Connect
an infrared module to the IrDA connector and enable the infrared function in the BIOS
setup. Pin Assignment
1 Vcc
2 NC
3 IR Receiver
4 Ground
5 IR Transmitter
CN4 GPIO Connector Pin Assignment
1 +5V
2 GPI1
3 GPI2
4 GPI3
5 GPI4
6 GPO1
7 GPO2
8 GPO3
9 GPO4
10 Ground
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels WIN Enterprises Unité de contrôle
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
