WIKA TGS55 Manuel utilisateur
DE
EN
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
ES
FR
Bimetal thermometer,
model TGS55
Gas-actuated thermometer with
capillary, model TGS73
Thermometers with inductive contacts 831,
for hazardous areas, models TGS55, TGS73
Thermometer mit Induktivkontakt 831, für explosions-
gefährdete Bereiche, Typen TGS55, TGS73
Thermomètres avec contacts inductifs 831, pour
zones explosives, types TGS55, TGS73
Termómetros con contacto inductivo 831, para zonas
potencialmente explosivas, modelos TGS55, TGS73
2
14327097.02 09/2019 EN/DE/FR/ES
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
DE
EN
ES
FR
Operating instructions
Models TGS55, TGS73
Page 3 - 34
Betriebsanleitung
Typen TGS55, TGS73
Seite 35 - 64
Mode d‘emploi
Types TGS55, TGS73
Page 65 - 94
Manual de instrucciones
Modelos TGS55, TGS73
Página 95 - 124
© 06/2019 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d‘emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta!
EN
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
14327097.02 09/2019 EN/DE/FR/ES
3
Contents
Contents
1. General information 5
2. Design and function 6
2.1 Overview . . . . . . . . . . . . . . . . . . 6
2.2 Description . . . . . . . . . . . . . . . . . 6
2.3 Scope of delivery . . . . . . . . . . . . . . . 7
3. Safety 7
3.1 Explanation of symbols . . . . . . . . . . . . . 7
3.2 Intended use . . . . . . . . . . . . . . . . . 8
3.3 Improper use . . . . . . . . . . . . . . . . . 9
3.4 Responsibility of the operator . . . . . . . . . . . 9
3.5 Personnel qualification . . . . . . . . . . . . .10
3.6 Personal protective equipment . . . . . . . . . . .10
3.7 Labelling, safety marks . . . . . . . . . . . . . 11
3.8 Ex marking . . . . . . . . . . . . . . . . .12
3.9 Specifications and temperature limits . . . . . . . .13
3.10 Special conditions for safe use (X conditions). . . . . .15
4. Transport, packaging and storage 16
4.1 Transport . . . . . . . . . . . . . . . . . . 16
4.2 Packaging and storage . . . . . . . . . . . . .16
5. Commissioning, operation 17
5.1 Use of thermowells. . . . . . . . . . . . . . . 19
5.2 Thermal contact medium. . . . . . . . . . . . . 20
5.3 Electrical connection . . . . . . . . . . . . . . 20
5.4 Adjusting the set pointers . . . . . . . . . . . .21
EN
14327097.02 09/2019 EN/DE/FR/ES
4WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
Contents
Declarations of conformity can be found online at www.wika.com.
6. Faults 22
7. Maintenance and cleaning 25
7.1 Maintenance . . . . . . . . . . . . . . . . .25
7.2 Cleaning . . . . . . . . . . . . . . . . . .26
8. Dismounting, return and disposal 27
8.1 Dismounting . . . . . . . . . . . . . . . . .27
8.2 Return . . . . . . . . . . . . . . . . . . .28
8.3 Disposal . . . . . . . . . . . . . . . . . . 29
9. Specifications 29
9.1 Standard cable socket . . . . . . . . . . . . .29
9.2 Inductive contact model 831 . . . . . . . . . . . 30
9.3 Associated isolating amplifiers . . . . . . . . . . . 31
9.4 Contact thermometer . . . . . . . . . . . . . .31
Annex: EU declaration of conformity 33
EN
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
14327097.02 09/2019 EN/DE/FR/ES
5
1. General information
■
The thermometers with switch contacts described in these operating
instructions have been designed and manufactured using state-of-
the-art technology. All components are subject to stringent quality and
environmental criteria during production. Our management systems
are certied to ISO 9001 and ISO 14001.
■
These operating instructions contain important information on
handling the instrument.Working safely requires that all safety
instructions and work instructions are observed.
■
Observe the relevant local accident prevention regulations and
general safety regulations for the instrument's range of use.
■
The operating instructions are part of the product and must be kept
in the immediate vicinity of the instrument and readily accessible to
skilled personnel at any time. Pass the operating instructions on to the
next operator or owner of the instrument.
■
Skilled personnel must have carefully read and understood the
operating instructions prior to beginning any work.
■
The general terms and conditions contained in the sales
documentation shall apply.
■
Subject to technical modications.
■
Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant data sheet: TV 25.01 (model TGS55)
TV 27.01 (model TGS73)
- Application consultant: Tel.: +49 9372 132-0
Fax: +49 9372 132-406
1. General information
EN
14327097.02 09/2019 EN/DE/FR/ES
6WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
2. Design and function
2.1 Overview
Example: model TGS55 Example: model TGS73
2. Design and function
Adjustable pointer
Case
Dial
Switch contact model 831
Stem
Cable socket
Adjustment key
Capillary
2.2 Description
These thermometers with inductive contact(s) have been designed
specically for applications in hazardous areas. WIKA manufactures
and qualies these instruments in accordance with the EN 13190 and
DIN 16196 standards.
EN
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
14327097.02 09/2019 EN/DE/FR/ES
7
Switch contact model 831
The built-in electrical inductive contacts are non-contact slot-type
inductive proximity sensors, which are powered from isolating ampliers
with certied intrinsically safe circuits. On exceeding the adjustable limit
values, their output circuits are either opened or closed.
2.3 Scope of delivery
Cross-check scope of delivery with delivery note.
3. Safety
3.1 Explanation of symbols
WARNING!
... indicates a potentially dangerous situation that can result in
serious injury or death, if not avoided.
CAUTION!
... indicates a potentially dangerous situation that can result in
light injuries or damage to property or the environment, if not
avoided.
DANGER!
... identies hazards caused by electrical power. Should the
safety instructions not be observed, there is a risk of serious
or fatal injury.
WARNING!
... indicates a potentially dangerous situation that can result in
burns, caused by hot surfaces or liquids, if not avoided.
2. Design and function / 3. Safety
EN
14327097.02 09/2019 EN/DE/FR/ES
8WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
Information
... points out useful tips, recommendations and information for
ecient and trouble-free operation.
3.2 Intended use
The instruments serve for temperature measurement in the chemical
and petrochemical industries, oil and gas industries and also for the
energy and shipbuilding industries.Through the high ingress protection
of the thermometer (IP65) and its liquid dampening, operation under
high vibration conditions is possible. In addition they full the high
requirements for resistance against aggressive media.The contact
thermometer, with up to 3 integrated model 831 inductive contacts,
displays the process temperature on-site and opens/closes circuits at
dened temperature values.
The instrument oers many application possibilities for gaseous and
liquid aggressive media that are not highly viscous or crystallising.
Only use the instrument in applications that lie within its technical
performance limits (e.g. temperature limits, material compatibility, ...).
→ For performance limits, see chapter 9 “Specications”.
The instrument has been designed and built solely for the intended use
described here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on
operation contrary to the intended use.
3. Safety
EN
WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
14327097.02 09/2019 EN/DE/FR/ES
9
3.3 Improper use
WARNING!
Injuries through improper use
Improper use of the instrument can lead to hazardous
situations and injuries.
▶Refrain from unauthorised modications to the instrument.
▶Do not use the instrument with abrasive or viscous media.
Any use beyond or dierent to the intended use is considered as
improper use.
Do not use this instrument in safety or emergency stop devices.
3.4 Responsibility of the operator
The instrument is used in the industrial sector.The operator is therefore
responsible for legal obligations regarding safety at work.
The safety instructions within these operating instructions, as well as the
safety, accident prevention and environmental protection regulations for
the application area must be maintained.
The operator is obliged to maintain the product label in a legible
condition.
To ensure safe working on the instrument, the operating company must
ensure
■
that suitable rst-aid equipment is available and aid is provided
whenever required.
■
that the operating personnel are regularly instructed in all topics
regarding work safety, rst aid and environmental protection
and know the operating instructions and, in particular, the safety
instructions contained therein.
■
that the instrument is suitable for the particular application in
accordance with its intended use.
■
that personal protective equipment is available.
3. Safety
EN
14327097.02 09/2019 EN/DE/FR/ES
10 WIKA operating instructions models TGS55, TGS73 with 831 (Ex)
3.5 Personnel qualication
WARNING!
Risk of injury should qualication be insucient
Improper handling can result in considerable injury and
damage to equipment.
▶The activities described in these operating instructions
may only be carried out by skilled personnel who have the
qualications described below.
Skilled personnel
Skilled personnel, authorised by the operator, are understood to
be personnel who, based on their technical training, knowledge
of measurement and control technology and on their experience
and knowledge of country-specic regulations, current standards
and directives, are capable of carrying out the work described and
independently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g.
of aggressive media.
3.6 Personal protective equipment
The personal protective equipment is designed to protect the skilled
personnel from hazards that could impair their safety or health during
work.When carrying out the various tasks on and with the instrument,
the skilled personnel must wear personal protective equipment.
Follow the instructions displayed in the work area regarding personal
protective equipment!
The requisite personal protective equipment must be provided by the
operating company.
3. Safety
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels WIKA Thermomètre
WIKA
WIKA CTH63I0 Manuel utilisateur
WIKA
WIKA CTH 6200 Manuel utilisateur
WIKA
WIKA 53 Series Manuel utilisateur
WIKA
WIKA CTH 6200 Manuel utilisateur
WIKA
WIKA TG58SA Mode d'emploi
WIKA
WIKA CTR3000 Manuel utilisateur
WIKA
WIKA TF-LCD Manuel utilisateur
WIKA
WIKA TR21 Manuel utilisateur
WIKA
WIKA 53 Series Manuel utilisateur
WIKA
WIKA TR Series Manuel utilisateur
WIKA
WIKA CTH 6450 Manuel utilisateur
WIKA
WIKA 53 Series Manuel utilisateur
WIKA
WIKA CTH6300 Manuel utilisateur
WIKA
WIKA CTR3000 Manuel utilisateur
WIKA
WIKA TR30 Manuel utilisateur
WIKA
WIKA TF44 Manuel utilisateur
WIKA
WIKA 70 Manuel utilisateur
WIKA
WIKA TR57-M Manuel utilisateur
WIKA
WIKA F73.100 Manuel utilisateur
WIKA
WIKA Intelli Therm TGT73.100 Manuel utilisateur
