WIKA PU-448 Manuel utilisateur
E
F
D
GB
Programming unit model PU-448 with magWIK
Programming unit for temperature transmitter
and resistance thermometer, model PU-448
Programmiereinheit für Temperatur-Transmitter
und Widerstandsthermometer, Typ PU-448
Unité de programmation pour transmetteur de
température et sonde à résistance, type PU-448
Unidad de programación para transmisor de
temperatura y termorresistencia, modelo PU-448
Operating instructions
Betriebsanleitung
Mode d'emploi
Manual de instrucciones
14003501.02 02/2014 GB/D/F/E
E
F
D
GB
WIKA operating instructions programming unit PU-4482
© 2011 WIKA Alexander Wiegand SE & Co. KG
All rights reserved. / Alle Rechte vorbehalten.
WIKA®is a registered trademark in various countries.
WIKA®ist eine geschützte Marke in verschiedenen Ländern.
Prior to starting any work, read the operating instructions!
Keep for later use!
Vor Beginn aller Arbeiten Betriebsanleitung lesen!
Zum späteren Gebrauch aufbewahren!
Lire le mode d'emploi avant de commencer toute opération !
A conserver pour une utilisation ultérieure !
¡Leer el manual de instrucciones antes de comenzar cualquier trabajo!
¡Guardar el manual para una eventual consulta!
Operating instructions model PU-448
Page
3 - 18
Betriebsanleitung Typ PU-448
Seite
19 - 34
Mode d'emploi type PU-448
Page
35 - 50
Manual de instrucciones modelo PU-448
Página
51 - 66
GB
1. General information 4
2. Specications 6
3. Transport, packaging and storage 7
4. Commissioning, operation 8
5. Connecting PU-448 programming unit 8
6. Virtual COM ports of the PU-448 10
7. LED diagnostics 15
8. Conguration of the models T12, T24,
TR21, TR30, TR31, TR33, TR34 temperature
transmitters or resistance thermometers 16
9. Maintenance 16
10. Disposal 17
Appendix: EC declaration of conformity 18
Declarations of conformity can be found online at www.wika.com.
WIKA operating instructions programming unit PU-448 3
14003501.02 02/2014 GB/D/F/E
Contents
Contents
GB
4WIKA operating instructions programming unit PU-448
14003501.02 02/2014 GB/D/F/E
1. General information
1.1 Intended use
thermometers.
solely for the intended use described here and may only be used
accordingly.
1.2 Description
production facilities of electronic temperature probe and sensor
and checks, for each contact, the connection between PC and
programming unit as well as the connection between the programming
unit and the transmitter.
Coloured LED's indicate to the operator the current status of the
pinpointed.
resistance thermometers.
1. General information
GB
WIKA operating instructions programming unit PU-448 5
14003501.02 02/2014 GB/D/F/E
measured.
patented magWIK quick connector.
resistance thermometers with coupler connectors, suitable adapter
cables are available.
1.3 Product label
Explanation of symbols
Before mounting and commissioning the instrument,
ensure you read the operating instructions!
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant
European directives.
For instruments with a serial number > S#10000, the new resistance
For instruments with the serial number < S#10000, the compatibility
with these models cannot be guaranteed.
1. General information
GB
6WIKA operating instructions programming unit PU-448
14003501.02 02/2014 GB/D/F/E
2. Specications
Specications Model PU-448
Software
connector
Electrical parameters
Voltage supply
connected transmitters/resistance
thermometers are powered through the
is needed.
Power supply
Connection to computer
Connection to transmitter
2 x banana plugs Ø 2 mm
Adapter cable for M12 connector
Adapter cable for angular DIN connector,
form A
Output voltage
Ambient conditions
Operating temperature 0 ... 50 °C
Storage
Humidity
Dimensions
Case 75 x 33.3 x 15 mm, ABS industrial case
documentation.
2. Specications
GB
WIKA operating instructions programming unit PU-448 7
14003501.02 02/2014 GB/D/F/E
3. Transport, packaging and storage
3.1 Transport
Check the programming unit for any damage that may have been
caused by transport. Obvious damage must be reported immediately.
3.2 Packaging
Do not remove packaging until just before mounting.
3.3 Storage
Permissible conditions at the place of storage:
Avoidance of exposure to the following factors:
Direct sunlight or proximity to hot objects
Soot, vapour, dust and corrosive gases
the conditions listed above. If the original packaging is not available,
pack and store the instrument as described below:
packaging.
bag containing a desiccant inside the packaging.
3. Transport, packaging and storage
GB
WIKA operating instructions programming unit PU-448
14003501.02 02/2014 GB/D/F/E
4. Commissioning, operation
administrator rights are required.
Software installation WIKA_TT, WIKA_T12 and WIKAsoft-TT
5. Connecting PU-448 programming unit
5.1 magWIK quick connector
4. Commissioning, operation / 5. Connecting ...
GB
WIKA operating instructions programming unit PU-448
14003501.02 02/2014 GB/D/F/E
5.2 Adapter cable for M12 connector
5.3 Adapter cable for angular DIN connector, form A
14005537.01
5. Connecting PU-448 programming unit
GB
10 WIKA operating instructions programming unit PU-448
14003501.02 02/2014 GB/D/F/E
administrator rights are required.
6. Virtual COM ports of the PU-448
between COM3 and COM10.
be set.
The setting of the COM ports is carried out as follows:
1. Click on “Start”
2. Search for
the term “Control panel”
and open it via the
box.
6. Virtual COM ports of the PU-448
Table des matières
Langues :
Autres manuels WIKA Carte mère
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
