WHISPER KOOL Ceiling Mount 4000 Instructions d'installation et d'utilisation

CEILING MOUNT

ADDENDUM

2/3/2020

Ceiling Mount 4000

Ceiling Mount 8000

Ceiling Mount Twin

with regard to the hardware and manual are subject to the restrictions and limitations imposed by the copyright laws of

the USA. Under copyright laws, this manual may not be copied, reproduced, translated, transmitted, or reduced to any

printed or electronic medium or to any machine-readable form, for any purpose, in whole or in part, without the written

consent of WhisperKOOL.

Every effort has been made to ensure that the information in this manual is accurate. WhisperKOOL is not responsible for

printing or clerical errors.

WhisperKOOL reserves the right to make corrections or improvements to the information provided and to the related

hardware at any time, without notice.

Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a

recommendation. WhisperKOOL assumes no liability with regard to the performance or use of these products.

We manufacture, test and certify 100% of our wine cooling units in

the USA. By sourcing the best components and closely controlling our

manufacturing processes, we can assure the highest-quality,

lowest defect manufacturing rates in the industry.

Conforms to ANSI/UL Std 427

Certied to CAN/CSA Std C22.2 No. 120

TABLE OF CONTENTS

Filter ............................................................. 3

Line Set, Drain Tube, and Electrical Connections ................. 4

Additional Access Holes .......................................... 4

2 Speed Switch ................................................... 5

Insulation Blanket Installation ................................... 6

Wiring Diagrams ................................................. 8

with regard to the hardware and manual are subject to the restrictions and limitations imposed by the copyright laws of

the USA. Under copyright laws, this manual may not be copied, reproduced, translated, transmitted, or reduced to any

printed or electronic medium or to any machine-readable form, for any purpose, in whole or in part, without the written

consent of WhisperKOOL.

Every effort has been made to ensure that the information in this manual is accurate. WhisperKOOL is not responsible for

printing or clerical errors.

WhisperKOOL reserves the right to make corrections or improvements to the information provided and to the related

hardware at any time, without notice.

Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a

recommendation. WhisperKOOL assumes no liability with regard to the performance or use of these products.

Page 2 | 1-800-343-9463 CM-A 020320

WARNING

The evaporator unit (fan coil unit) must be insulated using the insulation blanket provided in

accordance with this manual. Refer to the insulation blanket installation instructions.

Failure to follow the instructions provided will result in a poor vapor barrier, water

damage, rust, and system corrosion which will void the warranty on your unit.

The evaporator unit (fan coil unit) must be insulated using fiberglass insulation (R19or

higher) in addition to the provided insulation blanket. This includes the cavity between the

ceiling joists. A warm attic environment will reduce the capacity of the cooling system, as the

system will absorb heat from the attic in addition to the heat load from the wine cellar. This, in

effect, will significantly reduce the cooling system’s ability to cool the wine cellar.

Failure to properly insulate the evaporator unit may cause condensation to form on the

surface of the housing and water damage to the surrounding structure, the cooling unit, and

possibly the wine cellar.

To avoid these issues, install the insulation kit and insulate the surface of the evaporator unit

that is located outside of the wine cellar using fiberglass insulation.

*Additional insulation is required!

www.whisperkool.com | Page 3

Ceiling Mount - Addendum

Washable lter is installed from the factory on the return side of the grille, secured via Velcro strips.

FILTER

Page 4 | 1-800-343-9463 CM-A 020320

LINE SET, DRAIN TUBE, and ELECTRICAL CONNECTIONS

• Line set, drain tube and electrical connections have been relocated to be accessible from the bottom (cellar side / grille

side) located on return side of unit.

• Can be accessed by removing the grille.

• Flare ttings have been added to the line set.

• Liquid line – ¼” are tting.

• Suction line – ½” are tting.

• Connect Flare nuts from line set to system using Crescent wrenches or torque wrench.

• Pressure test is mandatory after connecting line set to the unit.

• Verify there are no leaks before beginning vacuum and charging process.

ADDITIONAL ACCESS HOLES

• Top access holes.

• 1 large hole for line set.

• 1 small hole for electrical.

• Note: do not run electrical wiring through same hole as line set.

• Side access holes.

• 1 large hole for line set.

• 1 small hole for electrical.

• Note: do not run electrical wiring through same hole as line set.

• Use the provided plug to cover the small hole not in use.

• Use the provided sticker (4”x 4”) to cover the large hole not in use.

• Use the provided strain relief clamp to route electrical wiring into unit.

• Seal around line set hole with cork tape, or other insulation to ensure proper seal.

• Note: side access holes will be applicable only if utilizing the ush mounting option.

www.whisperkool.com | Page 5

Ceiling Mount - Addendum

2 SPEED SWITCH

• The WhisperKool Ceiling mount now comes equipped with a 2-speed fan switch.

• Located on the electrical panel. Access by removing grille and internal access panel.

• Speed is sent from factory set to High. Flip the switch to adjust down to Medium speed.

Page 6 | 1-800-343-9463 CM-A 020320

INSULATION BLANKET INSTALLATION

1. Once mounting bracket location has been selected and installed, proceed to the insulation blanket installation.

2. Spray adhesive onto the sides of the portions of the evaporator unit and mounting bracket which protrude into

the attic. See spray adhesive directions for proper tack time before proceeding to step 3 (see illustration).

3. Wrap insulation piece (A) around the sides of the evaporator unit. Make sure the bottom edge of the insulation is

flush with the top edge of the mounting bracket (see illustration).

4. Set insulation in place by pressing firmly on all surfaces of the insulation that come in contact with the sides of the

evaporator unit (see illustration).

5. Using a utility knife, cut holes in the insulation for the line set,

wiring, and drain line if needed.

6. If necessary, cut the insulation to size using the top edge of the

An external Insulation Blanket is included with the purchase of each Ceiling Mount. It is mandatory that the insulation blanket

be installed on the exterior of the Ceiling Mount unit prior to unit installation in the ceiling.

• Ceiling Mount evaporator dimensions (including insulation blanket): 36.25”L x 15”W x 13”H.

• Whisperkool recommends constructing the frame using dimensions which include the insulation blanket to ensure

proper fitment.

*Tools required: spray adhesive, utility knife, cork tape, foil tape

11.25”

14.25”

68”

Insulation Blanket

Mini Ceiling Mount blanket dimensions

Ceiling Mount blanket dimensions

22”

102” 35.75”

14.25”

11”

Insulation Blanket

If needed, trim excess insulation around all edges.

www.whisperkool.com | Page 7

Ceiling Mount - Addendum

INSULATION BLANKET INSTALLATION, CONTINUED

before proceeding to step 8.)

8. Set piece (B) in place by pressing firmly on all surfaces of the insulation that come in contact with the top of the

evaporator unit (see illustration).

9. Using a utility knife, cut holes in the insulation for line set, wiring, and drain line if needed.

10. Once insulation is installed, apply foil tape to all seams, covering them completely.

11. Inspect insulation for damage/defects. If damaged, repair with foil tape.

12. Apply cork tape or equivalent to areas where the line set, wiring, and drain line enter the unit.

If needed, trim excess insulation around all edges.

evaporator unit as a template. Remove excess insulation. Proceed to piece (B) installation.

7. Spray the top of the evaporator unit with spray adhesive. (See spray adhesive directions for proper tack time

Page 8 | 1-800-343-9463 CM-A 020320

WIRING DIAGRAMS

Black

Green

White

Brown

Blue

White

Ref.

Solenoid

Green

Condensate

Pump

Yellow

Black

White

Black

Control Panel

Ground Stud.

Unit Ground

Stud

White

115V Line

115V Neutral

Ground

Reservoir

Green

12345

24v

Transformer

Blue

Ceiling Mount

24V Thermostat Conversion Kit

1 2 3 4 5

Fan

Relay

1 4

Line

Neutral

Fan

Solenoid

12345

Black

White

Black

White

Yellow

Blue

Yellow

Green

Red

24V

Thermostat

Field Installed

LEGEND

Factory Installed

Solenoid or

Compressor

Relay

Blue

Black

146mm

AFL

Blower

GREEN

BLACK

WHITE

YELLOW

BROWN

GREY

Capacitor

BLUE

CONDENSATE

PUMP

BLACK

YELLOW

BLACK

1 4

BLACK

GREEN

BLUE

WHITE

(4)

Ref.

Solenoid

GREEN

WHITE

BLACK

WHITE

115V LINE

115V NEUTRAL

GROUND

1 2 3 4 5

RESERVOIR

BLACK

(1)

1 4

WHITE

BLACK

12345

BLACK

BLUE

BLACK

LINENEUTRAL CNC

NO C NC NO C NO C NO

NEUTRAL LINE OUT 2 OUT 3

OUT 1

OUT 4

B Probe

Evap

ELIWELL RTN400

PANASONIC

Pb1Pb2Pb3 CPB CPBCPB

12V

GND

KEYB

13 4 5 6 7 8 9 10 11 12 13 14

KDT PLUS DISPLAY

146mm

AFL

Blower

GREEN

BLACK

BLUE

WHITE

YELLOW

BROWN

GREY

Capacitor

BLACK

BROWN

VERSION 3

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WHISPER KOOL Refroidisseur de vin

WHISPER KOOL

WHISPER KOOL SC Series Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Extreme Platinum Series Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Platinum Split Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Platinum Mini Split Manuel utilisateur

WHISPER KOOL

WHISPER KOOL SLIMLINE LS Manuel utilisateur

WHISPER KOOL

WHISPER KOOL QUANTUM Series Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Platinum Split Version 4 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL PLATINUM MINI Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Platinum Split H.E. PS4000 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL SC 2000i Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Mini Split Manuel utilisateur

WHISPER KOOL

WHISPER KOOL CEILING MOUNT 8000 H.E. Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Self-Contained Extreme Ti Manuel utilisateur

WHISPER KOOL

WHISPER KOOL XLT SERIES XLT 1600 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL 17-1103 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL SC PRO Series Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Twin Ceiling Mount H.E. CM9000 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL 2800 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL SS7000 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL EXTREME 5000TIR Manuel utilisateur

WHISPER KOOL

WHISPER KOOL 2000i Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Platinum Split Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Ceiling Mount H.E. CM4000 Manuel utilisateur

WHISPER KOOL

WHISPER KOOL Mini Platinum Split H.E. PSMINI Manuel utilisateur

Manuels Refroidisseur de vin populaires d'autres marques

U-Line

U-Line Echelon Wine Captain 2075WC Manuel du propriétaire

Haier

Haier WS50GA Manuel utilisateur

Cavist

Cavist 62 Manuel utilisateur

Kenmore

Kenmore 461.99130 Manuel utilisateur

Miele

Miele KWT 6422 iG Manuel utilisateur

Danby

Danby DWC113BLSDB Manuel utilisateur

Caple

Caple Wi6128 Manuel utilisateur

Avanti

Avanti WC1001 Manuel utilisateur

Frigidaire

Frigidaire FFWC38F6LS Manuel utilisateur

Titan

Titan TT-W2454SZ Manuel d'installation

Klarstein

Klarstein Botella 166 Uno Manuel utilisateur

Costway

Costway FP10130WL Manuel utilisateur

Lemair

Lemair LWC59 Manuel utilisateur

Haier

Haier JC-125GEA Manuel utilisateur

Caple

Caple WCi46B Manuel utilisateur

Climadiff

Climadiff CLI24 Guide rapide

Viking

Viking VCWB301LSS Manuel utilisateur

Caple

Caple WC6511 Manuel utilisateur