Whispbar K846W Manuel utilisateur
K846W
Fitting Kit
EN Fitting Instructions for Basic Carrier
x 4 x 2 x 2 x 4
x 4 x 4
Revision No: 3C 1
Fitting Kit K846W
MAX kgs (lbs)
W/P WHD
Mercedes
C-Class Glass Roof, 2dr Coupe 12-15 NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
C-Class Glass Roof, 2dr Coupe 12-15 AU 75 kgs (165 lbs) 75 kgs (165 lbs)
C-Class Glass Roof, 2dr Coupe 12-15 EU 75 kgs (165 lbs) 75 kgs (165 lbs)
C-Class Glass Roof, 2dr Coupe 12-15 ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
C-Class Glass Roof, 2dr Coupe 12-15 US 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class Glass Roof, 2dr Coupe 09-+ NZ 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class Glass Roof, 2dr Coupe 09-+ AU 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class Glass Roof, 2dr Coupe 09-+ EU 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class Glass Roof, 2dr Coupe 09-+ ZA 75 kgs (165 lbs) 75 kgs (165 lbs)
E-Class Glass Roof, 2dr Coupe 09-+ US 75 kgs (165 lbs) 75 kgs (165 lbs)
2
Fitting Kit K846W
X
A B C 1 2 3
C-Class Glass Roof, 2dr Coupe 12-15 (NZ) -430mm 325mm - 795mm 790mm -
-16 -15/16ths" 12 13/16ths" - 31 5/16ths" 31 1/8ths" -
C-Class Glass Roof, 2dr Coupe 12-15 (AU) -430mm 325mm - 795mm 790mm -
-16 -15/16ths" 12 13/16ths" - 31 5/16ths" 31 1/8ths" -
C-Class Glass Roof, 2dr Coupe 12-15 (EU) -430mm 325mm - 795mm 790mm -
-16 -15/16ths" 12 13/16ths" - 31 5/16ths" 31 1/8ths" -
C-Class Glass Roof, 2dr Coupe 12-15 (ZA) -430mm 325mm - 795mm 790mm -
-16 -15/16ths" 12 13/16ths" - 31 5/16ths" 31 1/8ths" -
C-Class Glass Roof, 2dr Coupe 12-15 (US) -430mm 325mm - 795mm 790mm -
-16 -15/16ths" 12 13/16ths" - 31 5/16ths" 31 1/8ths" -
E-Class Glass Roof, 2dr Coupe 09-+ (NZ) -380mm 370mm - 790mm 790mm -
-14 -15/16ths" 14 9/16ths" - 31 1/8ths" 31 1/8ths" -
E-Class Glass Roof, 2dr Coupe 09-+ (AU) -380mm 370mm - 790mm 790mm -
-14 -15/16ths" 14 9/16ths" - 31 1/8ths" 31 1/8ths" -
E-Class Glass Roof, 2dr Coupe 09-+ (EU) -380mm 370mm - 790mm 790mm -
-14 -15/16ths" 14 9/16ths" - 31 1/8ths" 31 1/8ths" -
E-Class Glass Roof, 2dr Coupe 09-+ (ZA) -380mm 370mm - 790mm 790mm -
-14 -15/16ths" 14 9/16ths" - 31 1/8ths" 31 1/8ths" -
E-Class Glass Roof, 2dr Coupe 09-+ (US) -380mm 370mm - 790mm 790mm -
-14 -15/16ths" 14 9/16ths" - 31 1/8ths" 31 1/8ths" -
3
Fitting Kit EN
K846W
First Time Installation
●Remove parts from inside the package and
check. Contact your dealer if any parts are
missing or damaged.
●These instructions show type A crossbar
fitted. They also apply to type B, C and D.
●This kit fits type A, B, C and D.
●Use keys to remove covers.
4
Fitting Kit EN
K846W
●Use hex screwdriver to reverse adjusting
screw 10 turns.
●Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
●Ensure each end of the crossbar is
adjusted equally.
●Attaches to factory-fitted mounting points
●Please check the front of this manual for
information relating specifically to your
vehicle.
●Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
5
Fitting Kit EN
K846W
●Tighten adjusting screw to 3 Nm (2.2 ft lb)
hand tight.
●Remove plastic clamp block by gripping bar
leg with fingers and push firmly with
thumbs until clamp block drops out behind
leg.
●Select plastic internal block (from fitting kit)
and insert into foot.
●Repeat for all legs.
6
Fitting Kit EN
K846W
Fitment
●Open or remove fixed-point covers.
●Select grubscrews and screw into the
vehicle's fixed points.
●Do not over tighten.
●Repeat for all four positions.
7
Fitting Kit EN
K846W
●Place load support over grubscrew as
shown.
●Refer to the underside of the pad for the
part number.
●Letters refer to the pad part numbers and
position.
●It is important to put the pads in the correct
position on the vehicle.
●Pad Part Number:
A = 235 A
B = 236 A
8
Fitting Kit EN
K846W
●Ensure the fixed-point covers sit vertically
in the recess in the pads.
●Place crossbars on pads ensuring the pads
fit into the holes underneath the foot and
the grubscrew passes through the hole in
the foot.
●Repeat for all four positions.
●Tighten the plastic knob. The side with the
nut showing should be facing up.
9
Fitting Kit EN
K846W
●Ensure the plastic knob is in the position
shown when fully tightened.
●Repeat for all legs.
●Check crossbar is securely attached to the
vehicle.
●Use keys to fit and lock covers
CAUTION: Recheck all fasteners immediately after
a load is applied to the crossbars.
Regularly check screws are tight.
10
Table des matières
Autres manuels Whispbar Accessoires automobiles
Whispbar
Whispbar K905W Manuel utilisateur
Whispbar
Whispbar K320W Manuel utilisateur
Whispbar
Whispbar K437W Manuel utilisateur
Whispbar
Whispbar K595W Manuel utilisateur
Whispbar
Whispbar K104W Manuel utilisateur
Whispbar
Whispbar K529W Manuel utilisateur
Whispbar
Whispbar K783W Manuel utilisateur
Whispbar
Whispbar K827W Manuel utilisateur
Whispbar
Whispbar K765 Manuel utilisateur
Whispbar
Whispbar K753W Fitting Kit Manuel utilisateur
Whispbar
Whispbar K129W Manuel utilisateur
Whispbar
Whispbar K906W Manuel utilisateur
Whispbar
Whispbar K927 Manuel utilisateur
Whispbar
Whispbar S44W Manuel d'utilisation et d'installation
Whispbar
Whispbar K948W Manuel utilisateur
Whispbar
Whispbar K374W Manuel d'utilisation et d'installation
Whispbar
Whispbar K998W Manuel d'utilisation et d'installation
Whispbar
Whispbar K665 Manuel utilisateur
Whispbar
Whispbar K301W Manuel d'utilisation et d'installation
Whispbar
Whispbar K945W Manuel utilisateur
