Whirlpool DU8950XT Manuel utilisateur

Contents

Important Safety Instructions..

Operating Instructions

Before starting your dishwasher

Starting your dishwasher

What happens in each cycle

What happens in each option

Proper Loading. .

Adding Detergent and Rinse Aid

For Best Results.

Special Tips .

Common Dishwashing Problems .

If You Need Service Or Assistance

Whirlpool Dishwasher Warranty

01988 Whirlpool Corporation

Page

. 15

. 17

Thank you for buying a Whirlpool appliance.

Please complete and mail the Owner Regis-

tration Card provided with this product.

Then complete the form below. Have this informa-

tion ready if you need service or call with a

question.

Copy model and serial numbers from plate

(see diagram on front cover) and purchase date

from sales slip.

Keep this book and sales slip together in a

handy place.

It is your personal responsibility and

obligation to be sure your dishwasher:

Is installed by a qualified installer.

Has been installed where it is protected from

the elements.

Has been installed on a floor strong enough to

support its weight.

Has been properly connected to electricity, water

and drain.*

Has been properly electrically grounded.*

Has had all hang tags and temporary

labels removed.

Is not used by children or anyone unable to

operate it properly.

Is properly maintained.

‘See Installation Instructions for complete

information.

Model Number

Serial Number

Purchase Date

Service Company Phone Number

ImportantSafetyInstructions

To reduce the risk of fire, electrical shock, or injury when using your

dishwasher, follow basic precautions including the following:

Read all instructions before using

the dishwasher.

Properly connect to electricity and water.

. DISHWASHER MUST BE ELECTRICALLY

GROUNDED. Read the Installation Instruc-

tions for details.

Be sure your dishwasher is installed on a

level floor that will hold the weight, and in an

area suitable for its size and use.

When discarding an old dishwasher, always

remove the door to prevent accidental

entrapment.

REMEMBER, use your dishwasher only for

the job it was designed to do.

Store dishwasher detergent in a cool, dry

place WHERE CHILDREN CAN’T REACH IT

Use ONLY detergents and rinse aids recom-

mended for use in a dishwasher.

Locate sharp items and knives so that they

are not likely to damage door seal or cut the

user.

DO NOT let children play in or on the

dishwasher.

DO NOT reach into the area below the

bottom rack until the heating element has

cooled for at least 20 minutes.

DO NOT wash plastic items unless marked

“Dishwasher Safe” or the equivalent. If not

marked, check manufacturer’s

recommendations.

DO NOT use your dishwasher unless all

enclosure panels are properly in place.

DO NOT sit on, stand on or abuse the dish-

washer door or dish racks.

DO NOT tamper with controls.

If hot water has not been used recently

(usually two weeks or longer), hydro-

gen gases may build up in the water

heater and the hot water pipes. HYDRO-

GEN GAS IS EXPLOSIVE. To prevent

injury or damage, before using your

dishwasher, turn on all hot water

faucets and allow water to run for sev-

era1 minutes. This will allow gases to

escape. Do not smoke or use any open

flame near the faucet while it is open.

Disconnect electrical power to the

dishwasher before attempting to

service.

- SAVE THESE INSTRUCTIONS -

OperatingInstructions

Beforestartingyourdishwasher

Properly load the top and bottom racks, and Check rinse aid dispenser.

silverware and cutlery baskets, See pages 9-11. Push door firmly when closing and it will

Spin the Upper and Lower Spray Arms to make automatically latch.

sure nothing will stop them from turning freely. Run hot water at sink nearest dishwasher until it

Add detergent. is hot. Turn it off.

Operating Instructions

Continued

Cycle selector buttons

0 0 0

Option selector buttons

Cycle control knob

Startingyourdishwasher

1. Push a Cycle Selector Button for the desired

cycle.

2. Push an Option Selector Button for each

desired option. (Use AIR DRY for RINSE &

HOLD Cycle.) The indicators above the buttons

will show which cycle and option(s) have been

selected.

3. Turn Cycle Control Knob clockwise to point to a

desired cycle. You will feel a definite stop at

each cycle mark. The dishwasher will automati-

cally start that cycle.

NOTE: HEAVY WASH and POTS & PANS

Cycles share the same spot on the dial. LOW

ENERGY WASH and CHINA CRYSTAL Cycles

also share a spot on the dial. The Cycle Selec-

tor Button determines which cycle operates.

To add a dish after starting

1. To be sure the added item is washed and

rinsed, make sure the Cycle Control Knob has

not passed LOW ENERGY WASH.

2. Lift up on the door latch to unlatch door and

stop the cycle. Don’t open the door until the

spray arms stop spinning.

3. Open the door and add the dish.

4. Close the door. Do not latch it. Wait 30 sec-

onds for air in the dishwasher to warm up. This

helps reduce the amount of moisture that can

come from the vent when restarting the cycle.

5. Press door firmly to latch it. The dishwasher will

automatically start where it stopped.

NORMALWASH .

DELAY WASH m

WATER HEATING 0

CLEAN 0

Changing a cycle setting

You can change a setting anytime during any

cycle.

1. Lift up on the door latch to unlatch the door and

stop the cycle. Do not open the door until the

spray arm stops spinning.

2. Turn the Cycle Control Knob clockwise to the

cycle you want.

3. Be sure the detergent dispensers are filled

properly for the new cycle.

4. Close and latch the door. The dishwasher will

automatically start the new cycle.

Changing an option

If you want to change a selected option, push the

RESET OPTIONS Button. Reselect an option,

if desired.

Using delay wash

1. Push desired Cycle Selector Button.

2. Push desired Option Selector Button(s).

3. Turn Control Knob clockwise to the number of

hours (from 1to 6 hours) you want the dish-

washer to delay before the selected cycle

starts.

4. Close and latch the door. The DELAY WASH

Signal Light will come on until the selected

cycle starts.

NOTE:

You can add items while time is counting down.

Close and latch the door. The timer will not

advance if the door is unlatched.

RINSE & HOLD and LOW ENERGY WASH

Cycles can’t be delayed.

The clean signal light

The CLEAN Signal Light will come on when a

washing cycle is complete. To turn it off, turn the

Cycle Control Knob clockwise slightly until the

light goes off.

Operating Instructions

Continued

Whathappensin eachcycle

Pots 8 Pans Cycle

Maximum cleaning for cooked- or baked-on foods.

Timer delays while the dishwasher automatically

heats the water to 145°F (63°C) in both washes

and the last rinse (marked

). Cycle time” will be

about 1% to 2 hours, depending on time needed to

heat water.

. RINSE 8 HOLO

RINSE

OR”

Wash’

Heavy Wash Cycle

A double wash for heavily soiled loads. Cycle

time** is about 75 minutes plus the time needed to

heat the water if the HI-TEMP WASH option is

selected.

. RINSE B HOLD

NORMALWASH . RINSE

OR”

I I

Rinse

Wash

I I

Rinse

**Cycle time includes heated dry times

Normal Wash Cycle

For normal, everyday soiled loads. (The Energy

Guide Label data is based on this cycle.) Cycle

time is about 65 minutes plus the time needed to

heat the water if the HI-TEMP WASH option is

selected.

RINSE&HOLD

NORM&WASH 0 RINSE

OR”

Rinse

I I

Wash I

Rinse I

I I

Rinse I

Low Energy Wash Cycle

For pre-rinsed or lightly soiled loads. Cycle time**

is about 60 minutes plus the time needed to heat

the water if the HI-TEMP WASH option is selected.

. RINSE 8 HOLD

NORMAL WASH RINSE

OR”

Rinse

**Cycle time includes heated dry times.

Operating Instructions

Continued

China Crystal Cycle Rinse & Hold Cycle

A light wash and gentle dry for china and crystal.

Unless AIR DRY is selected, the heating element

cycles on and off during the “dry” part of the cycle.

Cycle time** is about 60 minutes plus the time

needed to heat the water if the HI-TEMP WASH

option is selected.

For rinsing a few items to be washed one or more

days later. Cycle time is about 15 minutes. Use

AIR DRY only. Do not use detergent. Do not use

HI-TEMP WASH option.

NORMAL WASH RINSE

Wash

Rinse

Whathappensin eachoption

Hi-Temp Wash

When this option is selected, water for the main

wash and the final rinse is heated to 145°F (63%).

If water is already hot enough, the cycle

continues without delay. The WATER HEATING

Signal Light will be on while the cycle delays for

water heating.

. RINSE 8 HOLD

NORMAL WASH RINSE

OR”

“Cycle time includes heated dry times.

Air Dry

Air in the dishwasher is automatically heated

during the “dry” part of all cycles except RINSE

8 HOLD.

If the AIR DRY Option is selected, air in the

dishwasher is not heated. Using this option helps

save energy, but dishes take longer to dry (over-

night) and some water spotting may result. Some

items (such as plastics) may need towel drying.

For best results, use a liquid rinse aid such as

Jet-Dry.@

ProperLoading

Cup

and

glass

load

Preparation for loading

It is not necessary to rinse dishes before

putting them into the dishwasher. Just

remove large pieces, bones and other hard items.

The POWER CLEAN’ Module will remove food

particles from the water. It contains a chopping

device which will reduce the size of food items.

If hard items such as fruit seeds, nuts and egg

shells enter the POWER CLEAN* Module, you

might hear chopping, grinding, crunching or buzz-

ing sounds. Those sounds are normal when hard

items enter the module. Do not let metallic items

(i.e. pot handle screws) get into the POWER

CLEAN* Module. This could result in damage to

the POWER CLEAN* Module.

Always load dishes so soiled surfaces are

reached by spray from rotating spray arms. Water

must be able to drain off completely for best drying

results. Be careful to separate items so spray can

reach all surfaces.

‘Tmk.

Top rack loading

The top rack is designed for cups, glasses and

smaller items.

Cup and glass load

Place so open ends face down for cleaning

and draining.

Load glasses in top rack only. Bottom rack is

not designed for glasses. Damage may occur.

Place items in the rows between prongs. Plac-

ing them over the prongs can lead to breakage.

Be sure lightweight items are held firmly in place.

China, crystal and other delicate items must not

touch each other during dishwasher operation.

Damage may occur.

Mixed load

Load plastic items only in the top rack.

Only plastic items marked “dishwasher safe”

are recommended.

Load plastic items so the force of the spray does

not move them during the cycle.

Plastic items can be melted in the bottom rack.

Utensil load

Small bowls, pans and other utensils can be

placed in the top rack.

Mixed load

Continued -

Lower

Adjustable top rack

The top rack does not have to be level.

Raise or lower one or both sides to help fit tall

items in the top or bottom rack.

Turn knob clockwise to raise a side.

Turn knob counterclockwise to lower a side.

Bottom rack loading

Items with cooked-on or dried-on food should

be loaded in the bottom rack, with soiled surfaces

facing inward to the spray.

Mixed load

Make sure pot handles and other items do not

stop rotation of either the upper or lower spray

arm. Spray arms must move freely.

Securely place heavily soiled cookware face

down in rack.

Dish load

Place plates, soup bowls, etc., between prongs

and facing inward to the spray.

Do not place items directly over spray tower.

Utensil load

Load cookie sheets, cake pans and other large

items at sides and back. Loading such items in

front may keep water spray from reaching

detergent dispenser and silverware basket.

NOTE:

Do not load glasses, cups or plastic items in the

bottom rack.

When lower rack is removed, replace with

bumpers in front.

Table des matières

Autres manuels Whirlpool Lave-vaisselle

Whirlpool

Whirlpool WDI NC326C S Manuel d'installation et d'exploitation

Whirlpool

Whirlpool DU930PWST - on 24 Inch Full Console... Guide de l'utilisateur

Whirlpool

Whirlpool WBO 3T133 PF X Manuel d'installation et d'exploitation

Whirlpool

Whirlpool GU3600XTVB1 Manuel utilisateur

Whirlpool

Whirlpool DP940PWS Manuel utilisateur

Whirlpool

Whirlpool DU1099XT Series Manuel utilisateur

Whirlpool

Whirlpool WSFC 3M17 X Manuel utilisateur

Whirlpool

Whirlpool DP1040XTXB Instructions de montage

Whirlpool

Whirlpool DU900PCDB4 Manuel utilisateur

Whirlpool

Whirlpool ADP 5740 Manuel utilisateur

Whirlpool

Whirlpool ADP 4540 WH Manuel utilisateur

Whirlpool

Whirlpool ADG 211 Manuel utilisateur

Whirlpool

Whirlpool ADG 6966 IXM Manuel utilisateur

Whirlpool

Whirlpool ADG 7560/1 WP Manuel utilisateur

Whirlpool

Whirlpool ADG 9200 Manuel utilisateur

Whirlpool

Whirlpool 8900 Series Manuel utilisateur

Whirlpool

Whirlpool W10102500A Manuel utilisateur

Whirlpool

Whirlpool WDF520PADM Manuel utilisateur

Whirlpool

Whirlpool DU1099XT1 Manuel utilisateur

Whirlpool

Whirlpool 900 SERIES Manuel utilisateur

Whirlpool

Whirlpool DU810SWPT Manuel utilisateur

Whirlpool

Whirlpool ADP 905/3 WH Manuel utilisateur

Whirlpool

Whirlpool WDF518SAAB Manuel utilisateur

Whirlpool

Whirlpool DU8550XT Manuel utilisateur

Manuels Lave-vaisselle populaires d'autres marques

Electrolux

Electrolux ESI5211LOX Manuel utilisateur

KitchenAid

KitchenAid KUDB230B Manuel utilisateur

Brandt

Brandt BDJ424DB Manuel utilisateur

Asko

Asko DSD767UXXL.AU Manuel utilisateur

Beko

Beko DFN26210W Manuel utilisateur

NEFF

NEFF S153ITX00E Fiche technique

Midea

Midea SV 4.45 wi Manuel utilisateur

LG LDF7932 Manuel utilisateur

Gorenje

Gorenje GV63214 Manuel utilisateur

Hotpoint

Hotpoint HDA1100ZWH Manuel de service

Blomberg

Blomberg LDFN2240W Manuel utilisateur

AEG

AEG FFB83836PM Manuel utilisateur

Cylinda

Cylinda DM3220RFD Manuel utilisateur

Atag

Atag DW8214MB Manuel utilisateur

GE GLD8000 Series Manuel utilisateur

Siemens

Siemens SN23HI02KE Fiche technique

Omega

Omega ODW717X Manuel utilisateur

BORETTI

BORETTI BVW-683 Manuel utilisateur