Whelen Engineering Company WeCanX V2V Manuel utilisateur

Page 1

Form No.14D18B (061121)

Installation Guide:

WeCanX™ V2V Sync Module

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Internet: www.whelen.com

Sales e-mail: [email protected]

Customer Service e-mail: [email protected]

For warranty information regarding this product, visit www.whelen.com/warranty

Automotive: Serial Communications

WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or

other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Form No.14D18B (061121)

Installation Guide:

WeCanX™ V2V Sync Module

51 Winthrop Road,

Chester, Connecticut 06412-0684

Phone: (860) 526-9504

Internet: www.whelen.com

Sales e-mail: [email protected]

Customer Service e-mail: [email protected]

For warranty information regarding this product, visit www.whelen.com/warranty

Automotive: Serial Communications

WARNING: This product can expose you to chemicals including Lead which is known to the State of California to cause cancer and birth defects or

other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Mounting the V2V Module

WINDOW

MOUNTING

Mounting to Dash, Rear Deck or other surface:

Mounting to Vehicle:

It is recommended you mount the module to the dashboard or rear deck of the vehicle however it can be mounted to any surface or

window. If mounted to a window it is recommended to use VELCRO® hook & loop tape. The module be mounted face upmust

(side with logo). This is the side that receives the signal. If mounted to a window, the face must point out of the vehicle.

8 X 3/4 Phillips

Pan Head

Sheet Metal

Screw

Mounting Surface

Front (side with logo)

of Module must face up

IMPORTANT: Module must be

mounted inside the vehicle in

a location not exposed to

excessive heat or weather.

It is the responsibility of the

installation technician to

make sure the installation

and operation of this product

will not interfere with or

compromise the operation or

efficiency of any other vehicle

equipment!

IMPORTANT!

Before returning the vehicle

to active service, visually

confirm the proper operation

of this product, as well as all

vehicle components or

equipment.

Mounting the V2V Module

WINDOW

MOUNTING

Mounting to Dash, Rear Deck or other surface:

Mounting to Vehicle:

It is recommended you mount the module to the dashboard or rear deck of the vehicle however it can be mounted to any surface or

window. If mounted to a window it is recommended to use VELCRO® hook & loop tape. The module be mounted face upmust

(side with logo). This is the side that receives the signal. If mounted to a window, the face must point out of the vehicle.

8 X 3/4 Phillips

Pan Head

Sheet Metal

Screw

Mounting Surface

Front (side with logo)

of Module must face up

IMPORTANT: Module must be

mounted inside the vehicle in

a location not exposed to

excessive heat or weather.

It is the responsibility of the

installation technician to

make sure the installation

and operation of this product

will not interfere with or

compromise the operation or

efficiency of any other vehicle

equipment!

IMPORTANT!

Before returning the vehicle

to active service, visually

confirm the proper operation

of this product, as well as all

vehicle components or

equipment.

Page 2

RED

GRY

GRN

BLK

GRY

BLK/WHT

GRN

J18

Core Main Box

(+)

Battery

Fuse @

1 AMP

(-)

S eciﬁcationsp:

Input Voltage: +12 VDC

Current Draw: 30 mA

Wire as shown installing a

customer supplied fuse into

the power wire. Plug the

connector into J18 of Core

Main Box and operate using

tthe Core system.

V2V Sync Module:

V2V SYNC MODULE

MOUNT THIS SIDE

FACING TOWARD WINDOW

FOR GPS ACCURACY:

DIAGNOSTIC INDICATOR:

RED: No GPS

GREEN: GPS / Weak Signal

GPS / Strong SignalBLUE:

RED

GRY

GRN

BLK

GRY

BLK/WHT

GRN

J18

Core Main Box

(+)

Battery

Fuse @

1 AMP

(-)

S eciﬁcationsp:

Input Voltage: +12 VDC

Current Draw: 30 mA

Wire as shown installing a

customer supplied fuse into

the power wire. Plug the

connector into J18 of Core

Main Box and operate using

tthe Core system.

V2V Sync Module:

V2V SYNC MODULE

MOUNT THIS SIDE

FACING TOWARD WINDOW

FOR GPS ACCURACY:

DIAGNOSTIC INDICATOR:

RED: No GPS

GREEN: GPS / Weak Signal

GPS / Strong SignalBLUE:

Autres manuels Whelen Engineering Company Unité de contrôle

Whelen Engineering Company

Whelen Engineering Company WPA Series Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company CenCom Core-S C399S Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company 295SDA1 Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company CenCom Core-R CEM4HC Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company BETA1 Series Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company CanTrol Guide de dépannage

Whelen Engineering Company

Whelen Engineering Company WPKM1 Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company PCC4W Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company 295HFSA6 Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company PCCS9NP Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company CenCom Core C399 Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company WeCan Series Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company E-2010 Manuel utilisateur

Whelen Engineering Company

Whelen Engineering Company CenCom Core C399 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur