Whadda DS1302 Manuel utilisateur

USER MANUAL

DS1302 real-time clock module

WPI301

whadda.com

Introduction

To all residents of the European Union

Important environmental information about this product

This symbol on the device or the package indicates that disposal of the device after its

lifecycle could harm the environment. Do not dispose of the unit (or batteries) as unsorted

municipal waste; it should be taken to a specialized company for recycling. This device

should be returned to your distributor or to a local recycling service. Respect the local

environmental rules.

If in doubt, contact your local waste disposal authorities.

Thank you for choosing Whadda! Please read the manual thoroughly before bringing this

device into service. If the device was damaged in transit, do not install or use it and contact

your dealer.

Safety Instructions

Read and understand this manual and all safety signs before using this appliance.

For indoor use only.

•This device can be used by children aged from 8 years and above, and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if

they have been given supervision or instruction concerning the use of the device in a

safe way and understand the hazards involved. Children shall not play with the device.

Cleaning and user maintenance shall not be made by children without supervision.

General Guidelines

•Refer to the Velleman®Service and Quality Warranty on the last pages of this manual.

•All modifications of the device are forbidden for safety reasons. Damage caused by

user modifications to the device is not covered by the warranty.

•Only use the device for its intended purpose. Using the device in an unauthorized way

will void the warranty.

•Damage caused by disregard of certain guidelines in this manual is not covered by the

warranty and the dealer will not accept responsibility for any ensuing defects or

problems.

•Nor Velleman Group nv nor its dealers can be held responsible for any damage

(extraordinary, incidental or indirect) –of any nature (financial, physical…) arising from

the possession, use or failure of this product.

•Keep this manual for future reference.

What is Arduino®

Arduino®is an open-source prototyping platform based on easy-to-use hardware and

software. Arduino®boards are able to read inputs –light-on sensor, a finger on a button or a

Twitter message –and turn it into an output –activating of a motor, turning on an LED,

publishing something online. You can tell your board what to do by sending a set of

instructions to the microcontroller on the board. To do so, you use the Arduino

programming language (based on Wiring) and the Arduino®software IDE (based on

Processing). Additional shields/modules/components are required for reading a twitter

message or publishing online. Surf to www.arduino.cc for more information.

Product Overview

The DS1302 trickle-charge timekeeping chip contains a real-time clock/calendar and 31

bytes of static RAM. It communicates with a microprocessor via a simple serial interface.

The real-time clock/calendar provides seconds, minutes, hours, day, date, month, and year

information. The end of the month date is automatically adjusted for months with fewer

than 31 days, including corrections for leap year. The clock operates in either the 24-hour

or 12-hour format with an AM/PM indicator.

Specifications

•power supply: 1 x CR2032 (included)

•TTL compatible: VCC = 5 V

•temperature range: 0 °C to +70 °C

Features

•manages all timekeeping functions: real-time clock counts seconds, minutes, hours,

date of the month, month, day of the week, and year with leap year

•31 x 8 battery-backed general-purpose RAM

•simple serial port interfaces to most microcontrollers: simple 3-wire interface

•single-byte or multiple-byte (burst mode) data transfer for read or write of clock or

RAM data

•low power operation extends battery backup run time: 2.0 V to 5.5 V full operation

•uses less than 300 µA @ 2.0 V

Connection

Arduino®

WPI301

I/O

SCLK

5 V

VCC

GND

Pin Layout

Input. The CE signal must be asserted high during a read or a write. This pin has

an internal 40 kΩ (typ) pulldown resistor to ground. Note: Previous data sheet

revisions referred to CE as RST. The functionality of the pin has not changed.

I/O

Input/push-pull output. The I/O pin is the bidirectional data pin for the 3-wire

interface. This pin has an internal 40 kΩ (typ) pulldown resistor to ground.

SCLK

Input. SCLK is used to synchronize data movement on the serial interface. This

pin has an internal 40 kΩ (typ) pulldown resistor to ground.

VCC

Primary power supply pin in dual supply configuration. VCC1 is connected to a

backup source to maintain the time and date in the absence of primary power.

The VMA301 operates from the larger of VCC1 or VCC2. When VCC2 is greater

than VCC1 + 0.2 V, VCC2 powers the WPI301. When VCC2 is less than VCC1, VCC1

powers the WPI301.

GND

Ground.

Example

Before being able to use the sample program, an additional library needs to be installed. Go

to Sketch > Include Library > Manage Libraries...

Put "DS1302" in the search bar and install the RTC library by Makuna (should be the first

result).

Whadda WPI301 DS1302 Real-time clock module example

This demo sets the time on the DS1302 RTC module to the compiled time of the sketch.

After this is configured the time returned by the DS1302 module is periodically printed on

the serial monitor

Check whadda.com for more information including a wiring diagram for this demo.

// CONNECTIONS:

// DS1302 CLK/SCLK --> 7

// DS1302 DAT/IO --> 6

// DS1302 RST/CE --> 5

// DS1302 VCC --> 3.3v - 5v

// DS1302 GND --> GND

#include <ThreeWire.h>

#include <RtcDS1302.h>

ThreeWire myWire(6,7,5); // IO, SCLK, CE

RtcDS1302<ThreeWire> Rtc(myWire);

void setup ()

{

Serial.begin(57600);

Serial.print("compiled: ");

Serial.print(__DATE__);

Serial.println(__TIME__);

Rtc.Begin();

RtcDateTime compiled = RtcDateTime(__DATE__, __TIME__);

printDateTime(compiled);

Serial.println();

//Rtc.SetDateTime(compiled);

if (!Rtc.IsDateTimeValid())

{

// Common Causes:

// 1) first time you ran and the device wasn't running yet

// 2) the battery on the device is low or even missing

Serial.println("RTC lost confidence in the DateTime!");

Rtc.SetDateTime(compiled);

}

if (Rtc.GetIsWriteProtected())

{

Serial.println("RTC was write protected, enabling writing now");

Rtc.SetIsWriteProtected(false);

}

if (!Rtc.GetIsRunning())

{

Serial.println("RTC was not actively running, starting now");

Rtc.SetIsRunning(true);

}

RtcDateTime now = Rtc.GetDateTime();

if (now < compiled)

{

Serial.println("RTC is older than compile time! (Updating DateTime)");

Rtc.SetDateTime(compiled);

}

else if (now > compiled)

{

Serial.println("RTC is newer than compile time. (this is expected)");

}

else if (now == compiled)

{

Serial.println("RTC is the same as compile time! (not expected but all is fine)");

}

void loop ()

{

RtcDateTime now = Rtc.GetDateTime();

printDateTime(now);

Serial.println();

if (!now.IsValid())

{

// Common Causes:

// 1) the battery on the device is low or even missing and the power line was

disconnected

Serial.println("RTC lost confidence in the DateTime!");

}

delay(10000); // ten seconds

}

#define countof(a) (sizeof(a) / sizeof(a[0]))

void printDateTime(const RtcDateTime& dt)

{

char datestring[20];

snprintf_P(datestring,

countof(datestring),

PSTR("%02u/%02u/%04u %02u:%02u:%02u"),

dt.Month(),

dt.Day(),

dt.Year(),

dt.Hour(),

dt.Minute(),

dt.Second() );

Serial.print(datestring);

}

whadda.com

Modifications and typographical errors reserved - © Velleman Group nv. WPI301_v01

Velleman Group nv, Legen Heirweg 33 - 9890 Gavere.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Whadda Unité de contrôle

Whadda

Whadda WPI405 Manuel utilisateur

Whadda

Whadda WPM402 Manuel utilisateur

Whadda

Whadda WPI430 Manuel utilisateur

Whadda

Whadda WPI302 Manuel utilisateur

Whadda

Whadda WPI425 Manuel utilisateur

Whadda

Whadda WPSE325 Manuel utilisateur

Whadda

Whadda WPM400 Manuel utilisateur

Whadda

Whadda WPM349 Manuel utilisateur

Whadda

Whadda WPI317 Manuel utilisateur

Whadda

Whadda WPSE353 Manuel utilisateur

Whadda

Whadda WPI322 Manuel utilisateur

Whadda

Whadda WPM307 Manuel utilisateur

Whadda

Whadda Arduino 3.3 V Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur