Wetco BNT165 Series Manuel utilisateur

Table of Contents

Introduction………………………………………………………………………………………………...1

Main Functions…………………………………………………………………………………………….1

Specifications……………………………………………………………...………………………………2

Programming………………………………………………………………………………………………3

1．Key Definition………………………………………...…………………………………………..3

2．Setting Methods………………………………………………………………………………….3

3．Inquiry Function………………………………………………………………………………….4

4．System Initialization……………………………………………………………………………..4

5．Menu Diagram at Different Regeneration Modes……………………………………………5

6．Default Settings………………………………………………………………………………….7

Manual Regeneration…………………………………………………………………………………….7

Water Hardness Adjustment (Optional for Softener Valve)……………………………………..……8

Optional Parts……………………………………………………………………………………………..8

1. Inlet/Outlet Screw Standards……………………………………………………………………..8

2. Inlet/Outlet Screw Adaptor (Optional)……………………………………………………………8

3. Inlet/Outlet Connections Types…………………………………………………………..……….9

4. Drain Line Flow Controls (DLFC) and Injector…………………………………………………10

5. Bypass Assembly…………………………………………………………………..……………..12

Valve Powerhead Assembly………………………………………………………………………….13

Valve Body Assembly……………………………………………………………………………………16

Bypass Assembly…………………………………………………………………………………….….19

General Valve Installation……………………………………………………………………………….21

Trouble Shooting……………………………………………………………………………………...…22

BNT165/BNT265 Series Valve Operation Manual

- 1 -

Introduction

This valve is controlled with simple, user-friendly electronics displayed on a LCD screen. The

main page displays the current time. In addition, the main page also shows key valve information

including: regeneration mode, volume remaining (meter mode), regeneration days remaining

(timer mode).

BNT165 Series Outline BNT265 Series Outline

Bnt165 Key Pad Bnt265 Key Pad

Main Functions

●Valve Operation Mode:

1. SOFTENER: Standard water softener operation.

2. FILTER: Automatic backwashing filters such as Multi-Media Depth or

Carbon Filter.

●Regeneration Mode:

1. Calendar Clock 2. Meter Immediate 3. Meter Delayed

4. Meter Override

●Water Hardness can be adjusted:

BNT165/BNT265 Series Valve Operation Manual

- 2 -

User can adjust the mixing valve to get proper water hardness (optional for

softener valve).

●Display Format:

Metric format and US format are available to meet the different customers’

requirements.

●Three factory setting defaults are available:

1. Large capacity mode (ab. L.CAPA.)………fit the large size tank;

2. Medium capacity mode (ab. M.CAPA.)…...fit the medium size tank;

3. Small capacity mode (ab. S.CAPA.)………fit the small size tank.

●Auto-locking:

All keys will be locked after 3 minutes during the stand-by status, press and

hold “MENU” key for 3 seconds to unlock.

Specifications

●Hydrostatic Test Pressure ………....350 psi (24.15 bar)

●Working Pressure…………………...20~125 psi (1.38~8.62 bar)

●Working Temperature……………….1℃~39℃

●Riser Pipe Diameter Required……..1.050 inch (26.7mm)

●Electrical Adapter……………………Input:AC110V/AC240V，50Hz/60Hz; Output:AC12V

●Pressure Tank Thread………..……..2.5″NPSM

●Inlet/Outlet Connector……………....1″, 3/4″, 1/2″ (PPR, PPO, Brass)

BNT165 Series Dimensional Drawing (unit: inch, mm in brackets)

BNT165/BNT265 Series Valve Operation Manual

- 3 -

BNT265 Series Dimensional Drawing (unit: inch, mm in brackets)

Programming

1．Key Definition:

Menu key “ ”:

●Press this key to enter or exit the menu.

●Press and hold this key for 3 seconds to unlock when the screen was locked at

standby status.

Set/Regen. key “ ”:

●Press this key to select a program or to save the settings.

●Press and hold the key for 3 seconds to enter the manual regeneration interface

at standby status.

Up and Down key “ ”, “ ”:

●Press the key to increase or decrease the value of the settings.

●Press the key to enter the previous or the next menu.

2．Setting Methods:

●Press the key “ ” to enter the menu.

●Press the key “ ” or “ ” to select a parameter.

●Press the key “ ” to make the parameters flashing.

●Press the key “ ” or “ ” to change the value.

●Press the key “ ” to save the setting.

●Press the key “ ” or “ ” to select another parameter.

●Follow the above steps to change another parameter.

●Press the key “ ” to exit settings.

You can only change the flashing parameters.

Program will be back to standby status if any key was not operated in 1 minute.

Without being operated in 3 minutes, the keys will be locked.

BNT165/BNT265 Series Valve Operation Manual

- 4 -

3．Inquiry Function:

Press the key “ ”and “ ” simultaneously at the standby status, the screen will

display different regeneration information at different regeneration mode.

●Calendar Clock:

The first raw shows the days remaining of one regeneration cycle.

The second raw shows regeneration time.

D-07

02:00 AM

●Meter Immediate, Meter Delayed, Meter Override:

The first raw is the volume remaining of one regeneration cycle in meter. “G”

refers to Gallon

The second raw is total usage.

1300G

0000800G

4．System Initialization:

When power is first supplied, the valve may take about two minutes to initialize,

and the valve will show:

WAITING

PLEASE

Any key will be overridden at this time. When the valve reaches the service

position, it will display:

Regeneration Mode: Calendar Clock

09:00 AM

CC-07

Current Time

Regeneration Days Remaining

Calendar Clock

Regeneration Mode

Regeneration Mode: Meter Immediate

09:00 AM

MI-0900G

Current Time

Volume Remaining

Meter Immediate

Regeneration Mode Gallon

Regeneration Mode: Meter Delayed

09:00 AM

MD-0900G

Current Time

Gallon

Meter Delayed

Regeneration Mode

Volume Remaining

BNT165/BNT265 Series Valve Operation Manual

- 5 -

Regeneration Mode: Meter Override

09:00 AM

MO-0900G

Current Time

Gallon

Meter Override

Regeneration Mode

Volume Remaining

5. Menu Diagram at Different Regeneration Modes:

There is no “BRINE DURATION” and “REFILL DURATION”in filter valve.

METER

OVERRIDE

TIME

REG. TIME

REG. DAYS

REG. CAP.

BACK WASH

BRINE

RINSE

REFILL

LOAD

DEFAULT

CURRENT TIME

REGEN. TIME

DEFAULT 02:00

REGEN. DURATION

REGEN. CAPACITY

BACKWASH DURATION

BRINE&DRAW

DURATION

RINSE DURATION

REFILL DURATION

LOAD DEFAULT DATA

CALENDAR

CLOCK

TIME

REG. TIME

REG. DAYS

BACK WASH

BRINE

RINSE

REFILL

LOAD

DEFAULT

METER

IMMEDIATE

TIME

REG. CAP.

BACK WASH

BRINE

RINSE

REFILL

LOAD

DEFAULT

METER

DELAYED

TIME

REG. TIME

REG. CAP.

BACK WASH

BRINE

RINSE

REFILL

LOAD

DEFAULT

REGEN. MODE

REGIONAL

METRIC REGIONAL

Press MENU Key

L CAPA. M CAPA. S CAPA.

END

L CAPA.

FOR LARGER TANK

M CAPA.

For MIDDLE TANK

S CAPA.

FOR SMALLER TANK

BNT165/BNT265 Series Valve Operation Manual

- 6 -

PARAMETER

OPTIONS

DESCRIPTION

REGIONAL

METRIC

This option controls which unit format should be displayed in

the valve display.

(REGENERATION

MODE)

CALENDAR

CLOCK

The unit will initiate a regeneration at the next pre-set

regeneration time based on the interval of regeneration days.

METER

IMMEDIATE

The unit will initiate a regeneration immediately after the

volume remaining reaches zero.

METER

DELAYED

This is the most common setting. When the volume

remaining reaches zero, the system will initiate a

regeneration at the next pre-set regeneration time.

METER

OVERRIDE

When the volume remaining reaches zero, the system will

initiate a regeneration at the next pre-set regeneration time. If

the days between regeneration are reached before the

volume remaining reaches zero, the system will override the

meter setting and initiate a regeneration.

MO-DA-YE

(MONTH-DATE-YE

AR)

This setting is the current date. The date is used to track the

last time the system regenerated.

TIME

This setting is the current time of day.

REG. TIME

(REGENERATION

TIME)

This setting controls the time when a regeneration cycle will

start.

REG. DAYS

(REGENERATION

DAYS)

This value is the interval (days) between regenerations. It is

used to determine how many days between regenerations

REG. CAP.

This value is the total capacity between regenerations. It is

used to determine how many gallons can be used between

regenerations

BACKWASH

This setting controls the length of time for the unit to clean the

bed by reversing the flow of water upwards through the bed

and out to the drain.

BRINE

This setting controls the length of time for the unit to draw

regeneration (brine for softeners) from the brine tank and

slowly rinse it from the top to bottom of the media tank.

RINSE

This setting controls the length of time to give the tank a final

rinse from the top to the bottom in order to remove any last

traces of the regeneration from the tank.

REFILL

This setting controls the length of time which the brine valve

will open to refill the brine tank with water in order to produce

the regeneration solution for the next regeneration cycle. The

water accurately measured through the valves brine line flow

control to make a precise quantity of regeneration solution.

LOAD DEFAULT

This setting allows the current settings to be erased and

changed back to the default settings.

BNT165/BNT265 Series Valve Operation Manual

- 7 -

6．Default Settings.

Three default settings are available:

●Large capacity mode (L-CAPA.)…….….fit the larger size tank;

●Medium capacity mode (M-CAPA.)…....fit the medium size tank;

●Small capacity mode (S-CAPA.)………fit the smaller size tank.

Default value as follows:

Large

Capacity

Medium

Capacity

Small

Capacity

BACKWASH DURATION (minute)

BRINE DURATION (minute)

RINSE DURATION (minute)

REFILL DURATION (minute)

4.3

2.9

2.1

REGEN. DAYS (day)

REGEN. CAPACITY (Gallon)

FOR METER VALVE

1200

800

525

Manual Regeneration

Press and hold the key “ ” for 3 seconds to unlock screen.

In stand-by position, you can press and hold the key ‘■’for 5 seconds to into the manual

regeneration interface:

MAN.REG.

DELAY

MAN.REG.

IMMEDIAT

(1) If you choose ‘DELAY’ and press key ‘ ’ to exit, the valve will regeneration in next

REGEN. TIME (default is 02:00);

Note: The regeneration mode "METER IMMEDIATE" has no 'DELAY' choice here.

(2) If you choose ‘IMMEDIAT’ and press key ‘ ’ to exit, the valve will regeneration

immediately.

When regeneration started, the screen will display:

BACKWASH

--------

“BACKWASH”starts flashing. When the valve reaches “BACKWASH”position,

“BACKWASH”stops flashing. Dash line (the second raw) will be shortened on the way of

regeneration. Pressing any key will automatically advance the valve to the next cycle position:

BRINE, Screen will display:

BRINE

--------

Valve will be advanced to the rest of the regeneration (RINSE and REFILL) just like the

above steps.

BNT165/BNT265 Series Valve Operation Manual

- 8 -

Water Hardness Adjustment (Optional for Softener Valve)

Users can adjust the Water Hardness Adjustment Nut to get their desired water

hardness (optional for softener valve)

Operation methods:

Rotate the Water Hardness Adjustment Nut in a clockwise direction. The bigger

rotation angle, the higher water hardness.

Optional Parts

The following optional parts are used for both Bnt165 and Bnt265.

1．Inlet/Outlet Screw Standards:

Table I

BSP Screw

NPT Screw

Straight

900 Elbow

Straight

900 Elbow

1/2"、3/4"、1"

3/4",1"

3/4"

２．Inlet/Outlet Screw Adaptor (Optional):

No.

Name

No.

Name

PPR Adaptor 1＇

Nylon tri-pieces

4F×2F×4M

PPR Adaptor 3/4

Adaptor Ⅲ

Connect Screw NPT1M

PPR Adaptor 1/2

Adaptor Ⅲ

Connect Screw NPT6M

Adaptor (American standard 1＇

black)

Adaptor Ⅲ

Universal plug

Adaptor (American standard 6＂)

Adaptor Ⅲ

Connect screw 4F

Adaptor (American standard 4＂)

Adaptor Ⅲ

BNT165/BNT265 Series Valve Operation Manual

- 9 -

Elbow screw 6M

Adaptor Ⅲconnect screw 1M

Adaptor Ⅲ

Elbow screw 4M

Adaptor Ⅲconnect screw 6M

Adaptor Ⅲ

Elbow screw NPT6M

Adaptor Ⅲconnect screw 4M

Adaptor Ⅲ

Elbow screw 1M

３．Inlet/Outlet Connections Types:

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Wetco Unité de contrôle

Wetco

Wetco Water Specialist 1.5EI Mode d’emploi

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur