Wenger Select Lab Manuel utilisateur
Assembly Instructions
Select Lab Adjustable Height
Workstation
Visit the Music Lab Workstations web page at www.wengercorp.com.
Mobile version is shown.
Also available without casters.
Contents
Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Required Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Parts List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Workstation Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Basic Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Mobile Version Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Non-Mobile Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Final Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Optional Rackmount Shelf Assembly . . . . . . . . . . . . . . . . . . . . . . 23
Note: Please read and understand these instructions before starting the assembly.
Note: If you need additional information, contact Wenger Corporation using the information below.
©Wenger Corporation 2018 Printed in USA 2018-07 Part #225D098-02
Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448
Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com
2
Important User Information
General
Copyright © 2018 by Wenger Corporation
All rights reserved. No part of the contents of this manual may be reproduced, copied, or transmitted in any form
or by any means including graphic, electronic, or mechanical methods or photocopying, recording, or information
storage and retrieval systems without the written permission of the publisher, unless it is for the purchaser’s
personal use.
Printed and bound in the United States of America.
The information in this manual is subject to change without notice and does not represent a commitment on the
part of Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may
appear in these instructions.
In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct,
indirect, special, incidental, or consequential damages resulting from the use or defect of these instructions.
The manufacturer reserves the right to change this product at any time.
The information in this document is not intended to cover all possible conditions and situations that might occur.
The end user must exercise caution and common sense when assembling or installing Wenger Corporation
products. If any questions or problems arise, call the Wenger Corporation at (800) 4WENGER (493-6437)
or +1-507-455-4100 worldwide.
Manufacturer
The Select Lab Adjustable Height Workstation is manufactured by:
Wenger Corporation
555 Park Drive
Owatonna, MN 55060
(800) 4WENGER (493-6437) • +1 (507) 455-4100
wengercorp.com
Intended Use
· This product is intended for indoor use in normal ambient temperature and humidity conditions —
it must not be exposed to prolonged outside weather conditions.
· This product is intended to be assembled and used only as described in these instructions.
Warranty
This product is guaranteed free of defects in materials and workmanship for ten full years from date
of shipment. A full warranty statement is available upon request.
Optional power strips, digital locks and other electronic equipment are covered by the
individual manufacturer’s warranty.
3
Required Tools
· Phillips Head Screwdriver
· Rubber or Plastic Mallet
· 3/8” Open-End Wrench or Socket
· Drill
· Side Cutter or Scissors
· 5/32” Hex Insert Bit (supplied)
· 1-3/4” Caster Wrench (supplied)
Safety Precautions
Make sure anyone
assembling the Select
Lab Workstation has read
and understands these
instructions.
!CAUTION
Failure to comply with
Warnings and Cautions in
this document can result
in damage to property or
serious injury.
Throughoutthismanualyoumayndcautionsandwarningswhicharedenedasfollows:
• WARNING means that failure to follow the instruction may result in serious injury or death.
• CAUTION means that failure to follow the instruction may result in serious injury or damage
to property.
Read all of these safety instructions before assembling the Select Lab Adjustable Height Workstation.
!CAUTION
To avoid damage and injury,
more than one person is
needed for assembly.
!CAUTION
4
Hardware Parts List
*Quantities may vary, extras can be discarded.
250A508._
7 x 50mm
Particle Board Screw
(color matched paint)
1
X003583
2-3/8” Grommet
X003706
2” 5-Knuckle
Hinge
X000045
#8 x 5/8”
Pan Head Screw
X002540
8 x 25mm
Wood Dowel
5
2
3
4
100A444
Corner
Bracket
6
X003074
Flush Mount
Handle
X000824
#8-18 x 3/8”
Sheet Metal Screw
X003600
Wiring Clamp
X001503
#10-16 x 3/4”
Sheet Metal Screw
7
8
9
X002971
1/4-20 x 1/2”
Carriage Bolt
11
X003110
1/4-20
Wing Nut
X001442
1/4 x 47/64”
Flat Washer
X001484
1-1/2” Plug
100A534
1-3/4” Caster Wrench
12 13
14 16
X000482
#8 x 5/8
Sheet Metal Screw
(used only on mobile version)
17
X003736
3.75 Dia x 2.50
Clevis Pin
225D234
Door Stop
Bracket
X003456
Push-In
Bumper
15
18
X003738
#6 x 3/4”
Flat Head Screw
20
X001162
#8 x 1-1/4”
Sheet Metal Screw
(used only on mobile version)
X001962
5/32” Hex
Insert Bit
X003751
8-32
Hex Nut
X002998
4” Nylon Tie
26
21 22
27
X003743
1/4-20 x 0.708”
Machine Screw
25
250A508
7 x 50mm
Particle Board Screw
(black paint)
28
10
19
250A515._
1/4-20
Cap Nut
(color matched paint)
23
250A515
1/4-20
Cap Nut
(black paint)
24
5
Workstation Components
Item Description Item Description
29 Shelf Wiring Panel 39 Standard Swivel Caster
30 Front Wiring Panel 40 Adjustable Keyboard Bracket
31 Back Panel 41 Bottom Fixed Shelf
32 Left Side Panel 42 Wiring Access Door
33 Right Side Panel 43 Stiener
34 Desktop 44 Pullout Panel
35 Left Side Support Weldment 45 Headphone Mount
36 Right Side Support Weldment 46 Plain Channel*
37 Mobile Leg Tube 47 Non-Mobile Leg Tube*
38 Swivel Caster with Brake
31
33
35
32
34
37
39
41
38
40
42
44
45
*Used on
Non-Mobile Versions
Only
29 30 36
43
47
46
6
Basic Assembly
1. Connect the Shelf Wiring Panel (29) and Front Wiring Panel (30)
together using six Wood Dowels (5) and
veBlack 7 x 50mm Particle Board Screws (28).
2. Attach the Shelf Wiring Panel to the Back Panel (31)
usingveWoodDowels(5)and
four 7 x 50mm Particle Board Screws (1).
Shelf Wiring
Panel
(29)
Back Panel
(31)
Front Wiring
Panel
(30)
Wood Dowel
(5)
Black
7 x 50mm
Particle Board Screw
(28)
Wood Dowel
(5)
7 x 50mm
Particle Board Screw
(1)
The following assembly procedure shows the Mobile Version of the Adjustable
Height Workstation, the procedure is the same for the Non-Mobile Version unless
otherwise noted.
7
Basic Assembly (continued)
3. Attach four Wiring Clamps (9) to the Back Panel using four
#10-16 x 3/4” Sheet Metal Screws (10).
4. Attach two sets of 5-Knuckle Hinges (3) to the Back Panel using two
#6 x 3/4” Flat Head Screws (20).
Only one set of hinges will be attached if an optional Rackmount Shelf Accessory
will be installed.
Be sure that the screws are seated ush with the hinges.
Wiring Clamp
(9)
#10-16 x 3/4”
Sheet Metal Screw
(10)
This set of hinges will not be attached
if a Rackmount Accessory will be
installed.
5-Knuckle
Hinge
(3)
#6 x 3/4”
Flat Head Screw
(20)
8
Basic Assembly (continued)
5. Insert eight color matched 1/4-20 Cap Nuts (23) into the outside surface
of both the Left Side Panel (32) and Right Side Panel (33).
The outside of the Side Panels do not have dowel holes.
6. With the top facing up (the side without dowel holes), attach two sets of Door Stop Brackets (18)
to the back side of the Desktop (34) using two #8 x 5/8” Sheet Metal Screws (17) in each.
Only one set of brackets will be attached if anoptional Rackmount Shelf Accessory
will be installed.
7. Push/pull a Push-In Bumper (19) into each Door Stop Bracket.
Use two Bumpers where there will be adjoining Wiring Access Doors
Trimotheexcesstailsusingasidecutterorscissors.
Door Stop
Bracket
(18)
Push-In Bumper
(19)
#8 x 5/8”
Sheet Metal
Screw
(17)
Desktop
(34)
This set of brackets will not be
attached if a Rackmount Accessory will
be installed.
Color Matched
1/4-20
Cap Nuts
(23)
Dowel holes are in the
inside of the Side Panels.
Left
Side Panel
(32)
Right
Side Panel
(33)
Dowel holes face down.
9
8. Attach the Front Wiring Panel and Back Panel Assembly to the Right Side Panel (33)
usingthreeWoodDowels(5)andve7x50mmParticleBoardScrews(1).
Leave the Particle Board Screws loose until after Step #9.
9. Use more than one person to attach the Desktop to the Front Wiring Panel and
Right Side Panel using seven Wood Dowels (5) and three 7 x 50mm Particle Board Screws (1).
10. Tighten the Particle Board Screws installed in Step #8.
Basic Assembly (continued)
Desktop
Wood Dowel
(5)
7 x 50mm
Particle Board Screw
(1)
Tighten the
Particle Board Screws.
Right Side
Panel
(33)
Wood Dowel
(5)
7 x 50mm
Particle Board Screw
(1)
These two screws may need to
be removed to complete Step #9.
To avoid damage and injury,
more than one person is
needed for assembly.
!CAUTION
10
11. Attach the Left Side Panel to the Desktop, Back Panel and Front Wiring Panel using
six Wood Dowels (5) and eight 7 x 50mm Particle Board Screws (1).
12. Attach the Left and Right Side Support Weldments
to the Back Panel using
three #8 x 5/8” Sheet Metal Screws (17)
in each.
Left
Side Panel
(32)
Wood Dowel
(5)
7 x 50mm
Particle Board Screw
(1)
Basic Assembly (continued)
Left Side
Support Weldment
Right Side
Support Weldment
#8 x 5/8”
Sheet Metal Screw
(17)
Table des matières
Autres manuels Wenger Ordinateur de bureau
Wenger
Wenger Diva Acoustical Tower Manuel utilisateur
Wenger
Wenger Essential Lab Workstation Manuel utilisateur
Wenger
Wenger Studio Manuel utilisateur
Wenger
Wenger Select Lab Fixed Height Workstation Manuel utilisateur
Wenger
Wenger Percussion Workstation Manuel utilisateur
Wenger
Wenger Essential Lab Manuel utilisateur
