Welbilt Convotherm UleasyTouch Manuel utilisateur
Combi Oven
Convotherm UI easyTouch
maxx pro / deluxe
Operating instructions UL, USA - Original, ENG
Advancing Your Ambitions
Table of Contents
1 General 5
1.1 About These Operating Instructions 5
1.2 Safety Information That Must Be Read without Exception 6
2 The User Interface at a Glance 7
2.1 How the User Interface Works 7
2.2 Software Layout 8
2.3 Main Menu 10
2.4 Energy Saver Mode 12
3 Individual Cooking Made Easy 13
3.1 Individual Cooking at a Glance 13
3.2 The 'Individual Cooking' menu 14
3.3 How to Set Up a Cooking Profile 18
3.4 Saving a Cooking profile in the Cookbook 19
3.5 The 'Individual Cooking' Process Menu 20
3.6 The 'Individual Cooking' Workflow 23
3.7 The 'Smoker' Cooking Workflow 24
4 Rethermalization Made Easy 25
4.1 Rethermalization at a Glance 25
4.2 The 'Rethermalization' Menu 26
5 Fast cooking with Press&Go 30
5.1 How Press&Go Works 30
5.2 The 'Press&Go' Menu 31
5.3 Selecting Shelf Levels in Press&Go 33
5.4 The 'Press&Go' Cooking Workflow 34
5.5 Canceling a Cooking Sequence 35
6 Automatic Cooking with ConvoSense 36
6.1 How ConvoSense Works 36
6.2 The 'ConvoSense' Menu 37
6.3 Selecting Shelf Levels in ConvoSense 39
6.4 The 'ConvoSense' Cooking Workflow 40
6.5 Canceling a Cooking Sequence 41
7 Using the Cookbook 42
7.1 How the Cookbook Works 42
7.2 The 'Cookbook' Menu 43
7.3 Creating New Product Groups 45
7.4 Deleting a Cooking Profile from the Cookbook 46
8 Cleaning 47
8.1 The Cleaning Sequences at a Glance 47
8.2 The 'Cleaning' Menu 48
8.3 How to Set Up a Cleaning Profile 52
8.4 The 'Cleaning' Process Menu 53
8.5 Fully Automatic Oven Cleaning Workflow 56
Table of Contents
Operating Instructions 3
8.6 Semi-Automatic Oven Cleaning Workflow 57
9 Configuring Settings in Settings 59
9.1 Settings at a Glance 59
9.2 The 'Settings' Menu 60
10 Operating the Combi Oven in the Event of a Malfunction 63
10.1 Working with the Combi Oven in the Event of a Malfunction 63
10.2 The 'Error Messages' Menu 64
Table of Contents
Operating Instructions 4
1 General
1.1 About These Operating Instructions
Purpose
The purpose of these operating instructions is to provide everyone working with/on the combi oven
with an overview of its easyTouch software and how to use it, as well as to enable them to carry out
basic tasks with the software.
Target groups
Name of target group Tasks
Cook Primarily takes care of organizational tasks, such as:
■Entering cooking profile data
■Editing existing cooking profiles in the cookbook
■Coming up with new cooking profiles
■Configuring the unit’s settings
and takes care of all operator tasks as well if necessary.
Operator Actually operates the combi oven, taking care of tasks such as:
■Selecting cooking profiles
■Starting cooking profiles
■Selecting cleaning profiles
Customer documentation parts
Document type Contents
Installation manual ■Describes how to transport, set up, install, and put the unit into opera‐
tion
■Goes over all the hazards involved in the various installation activities
and how to prevent and/or counter them
■Contains technical specifications
Operating manual ■Describes the work sequences and operating steps when cooking and
cleaning
■Includes the maintenance schedule and troubleshooting information
■Goes over all the hazards involved when operating the unit and how to
prevent and/or counter them
Operating instructions ■Describes the unit’s user interface
■Includes the instructions for using the software
Decimal mark used
In order to ensure that all numbers can be properly understood internationally, a decimal point is al‐
ways used.
1 General
Operating Instructions 5
1.2 Safety Information That Must Be Read without Exception
Safety information found in the documentation for the customer
Only the installation manual and operating manual provide safety information for the combi oven.
The installation manual provides safety information for the transportation, setup, installation, placing-
into-operation, and removal-from-service tasks it describes.
The operating manual provides safety information for the cooking, cleaning, and maintenance tasks it
describes.
When using the operating instructions, the operating manual or installation manual should always be
consulted in order to obtain the relevant safety information. When performing activities that go beyond
simply using the software, the safety information in the operating manual and installation manual must
always be observed.
Parts of the customer documentation that must be read without exception
These operating instructions are exclusively limited to describing how to use the unit's user interface.
The various sets of instructions all end when a process in which warnings need to be observed (cook‐
ing and cleaning, for example) starts. For instructions on how carry out the corresponding process,
please refer to the installation manual or to the operating manual.
In order to ensure their safety and the safety of others, everyone working with/on the combi oven must
read and understand the following customer documentation sections before starting any work:
■The 'For Your Safety' section in the installation manual or in the operating manual, depending on
the task being carried out
■The sections in the installation manual or operating manual describing the work that will be carried
out
Failure to take the safety information in the installation and operating manuals into account may result
in death, injury, or property damage.
1 General
Operating Instructions 6
2 The User Interface at a Glance
2.1 How the User Interface Works
How it works
easyTouch is the name of the control interface for your combi oven. You can use the touch screen to
easily operate the corresponding software with your finger.
All of the combi oven’s functions can be accessed using the easyTouch user interface’s various me‐
nus. These menus will provide the functions in the form of buttons.
After selecting functions, both user information and prompts are used to guide the operator in process
menus. If necessary, the operator can make changes to sequences in these process menus.
The process menus will show a sequence’s progress with a progress bar, as well as the relevant time
and temperature information. An acoustic signal, combined with the appropriate user information, will
be used by the unit to signal the end of the sequence.
Optional functions
The software functions described in these operating instructions are not available for all unit versions.
Starten der Software
After you turn on your combi oven using the easyTouch control panel, the unit will run a self-diagnostic
routine. If the software is ready for use, the main menu for selecting an operating mode will appear.
For more information, please refer to 'Main Menu.' on page 10
The following operating modes will be available here:
■Individual cooking
■Rethermalization
■Press&Go
■ConvoSense (optional)
■Cookbook
■Cleaning
If Press&Go mode is set in the software, the combi oven will start the pre-heat function immediately;
please refer to 'Fast Cooking with Press&Go' on page 30 as well.
What do I need for cooking?
To cook food with your combi oven, you will need a cooking profile that is appropriate for the food be‐
ing cooked. You can enter a new cooking profile with the 'Individual cooking' menu. You can also se‐
lect a suitable cooking profile from the ones available in the 'Cookbook' menu and start it.
If 'Press&Go' mode is set in the software, all you have to do is select the cooking profile you want and
start it. All the cooking profiles available in 'Press&Go' are defined in the 'Cookbook.'
Before starting a cooking sequence, read and understand the rules, risks, and hazards associated
with safely using the unit (as described in the operating manual) and follow all the corresponding in‐
structions.
2 The User Interface at a Glance
Operating Instructions 7
2.2 Software Layout
The software’s layout
1 Header
2 Main pane
3 Footer
Top bar
The software’s top bar will show various displays depending on the specific menu and function that
are selected:
Selected cooking profile Shows a selected cooking profile, e.g., croissant, with a pic‐
ture and text
kitchenconnect® Shows whether there is a connection to the cloud
WLAN Shows whether there is a connection to the Internet
Time Shows the current time
2 The User Interface at a Glance
Operating Instructions 8
Main pane
The software’s main pane will show various buttons and displays depending on the specific menu and
function that are selected:
Light gray button Function available / selected, e.g., core temperature
Dark gray button Function not available / not usable
Scrollbar Used for vertical scrolling in order to view additional menu
contents
Used to close the menu Closes the menu
Buttons and displays in the bottom bar
The software’s bottom bar will show various buttons and displays depending on the specific menu and
function that are selected:
Back Navigation buttons
Navigation menu Used to access the navigation menu with all available oper‐
ating modes
Notifications Indicates notifications, as well as how many of them there
are
Used to access the 'Notifications' menu
Clock timer Shown when a time-controlled cooking profile or cleaning
profile is active
Error list Indicates errors, as well as how many of them there are
Used to access the 'Error list' menu
2 The User Interface at a Glance
Operating Instructions 9
2.3 Main Menu
Accessing the main menu
This menu is password-protected and can only be accessed by specific users in order to make
changes to existing cooking profiles if necessary.
Main menu functions
■Provides access to all available operating modes
Main menu layout
1 Main menu
2 Navigation menu
2 The User Interface at a Glance
Operating Instructions 10
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Welbilt Four
Welbilt
Welbilt Convotherm maxx 6.10 Manuel utilisateur
Welbilt
Welbilt Convotherm maxx Cmx eT 6.10 ES Manuel utilisateur
Welbilt
Welbilt Convotherm OES mini easyStart Manuel utilisateur
Welbilt
Welbilt maxx pro Manuel utilisateur
Welbilt
Welbilt Convotherm 4 easyTouch Manuel utilisateur
Welbilt
Welbilt Convotherm OES 6.10 Mini Manuel utilisateur
Welbilt
Welbilt Convotherm 4 easyTouch Manuel utilisateur
Welbilt
Welbilt Convotherm OES mini easyTouch Manuel utilisateur
Welbilt
Welbilt Merrychef conneX Manuel utilisateur
Welbilt
Welbilt Convotherm OES 10.10 mini easyTouch Manuel utilisateur
Welbilt
Welbilt Convotherm OES mini easyTouch Series Manuel utilisateur
Welbilt
Welbilt Convotherm maxx Cmx eT 6.10 ES Manuel utilisateur
Welbilt
Welbilt Convotherm 4 easyTouch Manuel utilisateur
Welbilt
Welbilt Convotherm OES 6.10 Mini Manuel utilisateur
Welbilt
Welbilt Convotherm OES mini 6.06 Manuel utilisateur
Welbilt
Welbilt Convotherm 4 easyTouch Manuel utilisateur
Welbilt
Welbilt Lincoln Impinger 1600 Series Manuel utilisateur
Welbilt
Welbilt Convotherm maxx pro Series Manuel utilisateur
Welbilt
Welbilt MERRYCHEF eikon e2s Manuel utilisateur
Welbilt
Welbilt Convotherm 4 easyTouch Manuel utilisateur
