Henny Penny Smoker Box Manuel utilisateur
Installation
Manual
Smoker Box
FM06-080A • 8/23/2018
en-US
2Installation Instructions
Directory of Contents
3Installation Instructions
1Introduction......................................................................... 5
1.1About this manual ............................................................................ 5
1.1.1Explanation of signs .................................................................................. 6
1.2Use of the unit................................................................................... 7
1.3Warranty............................................................................................ 7
2Safety instructions ............................................................. 8
3Description of the unit ..................................................... 10
3.1Overview of the unit ....................................................................... 10
3.2Unit and connection data............................................................... 10
4Attaching and removing the unit .................................... 11
4.1Minimum clearances and ambient conditions............................. 11
4.2Attaching the unit........................................................................... 12
4.3Removing the unit .......................................................................... 12
5Operating controls ........................................................... 14
5.1Smoking .......................................................................................... 14
5.2After smoking ................................................................................. 17
6Cleaning ............................................................................ 18
7Maintenance...................................................................... 20
FM06-080A
Directory of Contents
4Installation Instructions
FM06-080A
Introduction
5Installation Instructions
1 Introduction
1.1 About this manual
The installation instructions are part of the unit and contain
information on safe installation of the unit.
Observe the following notes and adhere to them:
•Read the installation instructions completely prior to installation.
•Make the installation instructions available to the installation fitter
at the operating site at all times.
•Preserve the installation instructions throughout the service life of
the unit.
•Insert any additions from the manufacturer.
•Pass on the installation instructions to any subsequent operator of
the unit.
Target group The target group of the installation instructions is trained qualified
personnel that is familiar with installing and operating the unit.
Figures All figures in this manual are intended as examples. Discrepancies
can arise between this and the actual unit.
FM06-080A
Introduction
6Installation Instructions
1.1.1 Explanation of Signs
DANGER Imminent danger
Failure to comply will lead to death or very severe injuries.
WARNING Potential danger
Failure to comply can lead to death or very severe injuries.
CAUTION Dangerous situation
Failure to comply can lead do slight to moderately severe injuries.
NOTICE Property damage
Failure to comply can cause property damage.
INFORMATION Information
Notes for better understanding and operation of the unit.
Symbol / sign Meaning
•Listing of information.
Action steps which can be performed in
any sequence.
1.
2.
Action steps which must be performed
in the specified sequence.
Result of an action performed or
additional information relating to it.
FM06-080A
Introduction
7Installation Instructions
1.2 Use of the Unit
This unit is intended to be used solely for commercial purposes,
particularly in commercial kitchens.
1.3 Warranty
The warranty is void and safety is no longer assured in the event of:
•Improper conversion or technical modifications of the unit,
•Improper use,
•Improper startup, operation or maintenance of the unit,
•Problems resulting from failure to observe these instructions.
FM06-080A
Safety Instructions
8Installation Instructions
2 Safety Instructions
The unit complies with applicable safety standards. Residual risks
associated with operation or risks resulting from incorrect operation
cannot be ruled out and are mentioned specifically in the safety
instructions and warnings.
The operator must be familiar with regional regulations and observe
them.
The installation fitter must be familiar with regional regulations and
observe them.
Observe the safety information in these mounting instructions as well
as the "Safety information" section of the operating instructions.
Hot surfaces Risk of burns from hot surfaces
•Protect arms and hands by wearing suitable protective gloves.
•Do not touch heating elements, hot surfaces or accessories
immediately after use.
•Allow surfaces to cool prior to cleaning.
Fire prevention Risk of fire from overheating
•Observe the unit during operation.
Firefighting
•In the event of a fire, disconnect the unit from the electrical supply
mains.
Organizational measures Risk of property damage and personal injury from lack of
organizational measures
•Prior to starting the installation tasks, notify any operator present
about the procedure.
Improper installation Risk of property damage and personal injury from improper
installation
•Install the unit only as specified in these installation instructions.
Fire prevention Risk of fire from combustible surfaces
•Observe general fire prevention regulations.
•Set up the unit only on a non-combustible surface.
•When setting up the unit in close proximity to heat-sensitive
substances or substances that pose a risk of fire, observe fire
prevention regulations.
•Ceilings above the unit must be noncombustible.
Commissioning Risk of property damage and personal injury from improper
commissioning
•Only use the unit in conjunction with a permitted Combisteamer.
FM06-080A
Safety Instructions
9Installation Instructions
Improper cleaning Risk of chemical burns from cleaning agent
•Follow the instructions of the cleaning agent manufacturer.
Risk of property damage from improper cleaning
•Clean the unit after using it.
•Do not clean the unit with a high-pressure cleaner or water jet.
•Do not shock the unit by cooling it abruptly.
•Do not immerse the housing in water.
•Clean the unit regularly.
FM06-080A
Description of the Unit
10 Installation Instructions
3 Description of the Unit
3.1 Overview of the Unit
ab
c
ed
fg
a Connecting pipe e Seal
b Firebox f Brush
c Smoker box g Funnel
d Connection line
3.2 Unit and Connection Data
SmokeInside
Electrical Connection
Type of connection 1N 230 V AC 50/60 Hz
Connected load (W) 245
Fuse (A) 16
FM06-080A
Table des matières
Autres manuels Henny Penny Four
Henny Penny
Henny Penny FlexFusion Manuel utilisateur
Henny Penny
Henny Penny GCC-620 Manuel utilisateur
Henny Penny
Henny Penny FSHN610 Mode d'emploi
Henny Penny
Henny Penny CLIMAPLUS LCS Instructions d'utilisation
Henny Penny
Henny Penny FlexFusion FGE 615 Mode d'emploi
Henny Penny
Henny Penny ESC-615 SmartCombi Mode d’emploi
Henny Penny
Henny Penny ESC-615 SmartCombi Manuel utilisateur
Henny Penny
Henny Penny SCD-8 Manuel utilisateur
Henny Penny
Henny Penny GCC-220 Manuel utilisateur
Henny Penny
Henny Penny SCO-100 Manuel utilisateur
Henny Penny
Henny Penny FlexFusion FSEN605 Manuel utilisateur
Henny Penny
Henny Penny FlexFusion GAS PLATINUM COMBI Series Manuel utilisateur
Henny Penny
Henny Penny FlexFusion FPE-615 Mode d'emploi
Henny Penny
Henny Penny FlexFusion Electric SpaceSaver Manuel utilisateur
Henny Penny
Henny Penny FlexFusion SpaceSaver Plus FSE- 610 Manuel utilisateur
Henny Penny
Henny Penny Electric SpaceSaver Plus 610 Manuel utilisateur
Henny Penny
Henny Penny FlexFusion SpaceSaver Plus FSE-610 Manuel utilisateur
Henny Penny
Henny Penny ClassicCombi ECC-215 Manuel utilisateur
Henny Penny
Henny Penny FlexFusion PLATINUM COMBI Manuel utilisateur
Henny Penny
Henny Penny GCC-120 Manuel utilisateur
