1Remove the Atom and its accessories from the packaging.
2A Screw the right pedal onto the right crank. Tighten
clockwise securely using the provided spanner N.B. The
cranks have a standard screw tment, allowing you to
customise the Atom with pedals of your choice.
2B Screw the left pedal onto the left crank. Tighten anti-
clockwise securely using the spanner.
3A Take the Tri-bar assembly and insert the two ends into the
Tri-bar clamps with device holder out in front of the bike.
3B Level up the two Tri-bar ends in their clamps, tighten the
securing screw using the 4mm Allen key.
3C Insert the two plastic bungs into the open ends of the
Tri-bar ends.
04 GET READY
TO RIDE
BUILD
4Take the metal Tri-pad cups, rest them on the blocks
and screw into place to secure. Remove the velcro from
the back of the pads (without removing the protective
layer). Once off, remove the protective layer and afx to
the metal Tri-pad cup. You can now fasten the Tri-pads
in position on to the velcro.
5Before riding the Atom ensure all bolts are tight and the
handlebar xings are secure.
6Plug your Atom into a wall outlet using the power
adaptor provided. Make sure the switch on both the wall
outlet and the rear of the Atom are turned on.
