Waterbird ITSC1000 Manuel utilisateur

www.waterbird.at

Control Unit

User Manual

Version 1.0

www.waterbird.at

Table of Contents

1. Control Unit ITSC1000 ................................................................................................................. - 1 -

1.1 Technical Data ..................................................................................................................... - 1 -

1.2 Interface Definition ............................................................................................................. - 2 -

1.3 Mounting and Dismounting on Slider ................................................................................. - 4 -

Mounting Bracket........................................................................................................................ - 4 -

Mounting of Control Unit ............................................................................................................ - 4 -

Dismounting of Control Unit ....................................................................................................... - 4 -

1.4 Handling and Safety Instructions ........................................................................................ - 5 -

1.5 Troubleshooting .................................................................................................................. - 6 -

1.6 Regulatory Hints .................................................................................................................. - 7 -

2. Mobile App .................................................................................................................................. - 9 -

2.1 Operating Systems............................................................................................................... - 9 -

Android........................................................................................................................................ - 9 -

iOS................................................................................................................................................ - 9 -

2.2 Connecting to Control Unit.................................................................................................. - 9 -

2.3 System Initialization .......................................................................................................... - 10 -

2-Point-Initialization .................................................................................................................. - 10 -

1-Point-Initialization .................................................................................................................. - 10 -

2.4 System Control .................................................................................................................. - 11 -

Speed and Acceleration Control................................................................................................ - 11 -

Positioning................................................................................................................................. - 11 -

Emergency Stop......................................................................................................................... - 11 -

2.5 Camera Settings................................................................................................................. - 12 -

Shutter....................................................................................................................................... - 12 -

Focus.......................................................................................................................................... - 12 -

External Light............................................................................................................................. - 12 -

2.6 Timelapse .......................................................................................................................... - 13 -

Record Time............................................................................................................................... - 13 -

Movie Length............................................................................................................................. - 13 -

Interval ...................................................................................................................................... - 13 -

Pictures...................................................................................................................................... - 13 -

2.7 Features............................................................................................................................. - 14 -

www.waterbird.at

Ping-Pong Mode ........................................................................................................................ - 14 -

Step-By-Step Mode.................................................................................................................... - 14 -

2.8 Settings.............................................................................................................................. - 15 -

Initialization............................................................................................................................... - 15 -

Timelapse .................................................................................................................................. - 15 -

Controller Settings..................................................................................................................... - 15 -

2.9 Control Unit Firmware Update.......................................................................................... - 16 -

Multi Slider –User Manual

www.waterbird.at - 1 -

1. Control Unit ITSC1000

The ITSC1000 Control Unit is a controller for timelapse and digital motion control for video

and photo equipment. It allows to control up to 3 industrial class stepper motors and the

triggering of shutter and focus of a connected camera. Most models of popular cameras are

supported. Auxiliary input and output port for light control and motor control via an analog

voltage is also available.

For controlling the outputs the Control Unit has a built in Bluetooth® Smart 4.2 BLE compliant

module that allows the connection to a BT LE (Low Energy or 4.0 or higher) capable

Smartphone or Tablet. Applications for controlling the Unit are available for Android™ and iOS

powered devices on App Stores.

1.1 Technical Data

Operating Parameters

Temperature Range

20°C to +50°C (-4°F to 122°F)

Maximum Relative Humidity

90%, noncondensing

Ports & Connection

Supply Connector

5.5/2.1mm or 5.5/2.5mm (Outer/Inner diameter)

DC barrel - center positive

Supply Voltage

9 –16 Vdc stabilized voltage

Supply Current

Source shall be capable of providing minimum 2A

Motor Output

3 x Molex 22-05-3041

(fitting to Motor Connector Molex 22-01-3047)

Motor Type

Bipolar 4-wire stepper Motor

maximum 12V and 1,4A rated recommended

with a minimum isolation voltage of 24V

Camera Trigger Port

2,5mm (3/32”) Stereo Klinke / TRS

Sleeve: GND, Ring: Focus, Tip: Shutter

Internal pull-up 3,3V , Maximal Voltage: 5Vdc

Auxiliary Port

3,5mm (1/8”) Stereo Klinke / TRS

Sleeve: GND, Ring: Aux 2 In/Out, Tip: Aux 1 In/Out

Internal pull-up 3,3V , Maximal Voltage: 5Vdc

USB Port

USB Micro B

Used for Firmware Updates and future use

Max Voltage 5Vdc, no supply of motors via USB

Multi Slider –User Manual

www.waterbird.at - 2 -

1.2 Interface Definition

A, B, C) Motor Connectors

These are the connectors for connecting the bipolar stepping motors.

The Motor of the Slider carriage needs to be connected at Port A.

Motor Connector

Connected Motor

Motor of the Slider carriage

Not activated, for future use (e.g. Pan/Tilt, Up/Down or rotating)

1) Supply DC Connector

The Supply DC Connector is the power source for Motor and Logic part. A stabilized DC voltage

between 9 –16 Vdc must be used. Typically 12V or 14V Battery packs are recommended.

2) Camera Trigger Connector

Control Unit can control a camera through the wired remote shutter port with 2.5mm Klinke

(3/32” Male TRS) connector. Standard Cables are available for most camera models on the

market.

Control Unit can control a camera through the wired remote shutter port with 2.5mm Klinke

(3/32” Male TRS) connector. Standard Cables are available for most camera models on the

market.

The Camera Trigger Connector provides control over the focus and shutter trigger only, it is

not possible to control ISO, aperture, or other settings of the camera over this port. If you set

your camera to bulb mode the control unit can control the shutter speed (if your camera

supports this mode).

3) LED Indicator

The blue LED Indicator shows the current status of the Control Unit. If no light is visible the

Control Unit is unpowered or in Bootloader Mode.

Multi Slider –User Manual

www.waterbird.at - 3 -

If the blue LED Indicator is flashing the Control Unit is waiting for a connection to a Control

device (e.g. Smartphone or Tablet).

If the blue LED Indicator is constantly on, the Control Unit is connected and ready to be used.

4) USB Connector

The USB connector can be used to control the Control Unit via a PC (Software planned to be

released in the future) and for firmware updates. Powering the Control Unit via USB is only

possible for firmware updates, no Motor control is possible if no power is available on the

Supply DC Connector.

5) Auxiliary Connector

This Port can be used to connect accessories like a manual knob or external controls e.g. to

control a light that is switching on and off before and after the picture taken for long duration

time-lapse.

6) Reset + Motor Off Button

This button can be pressed to reset the internal processor of the Control Unit. This causes also

a sudden stop of all connected Motors. You can use it if the System does not react as desired

to prevent from damaging equipment. Please take care that the Motors will not be powered

after pressing. And in case of vertical usage and high load the carriage could be pulled down

by gravity. After pressing the button the initialization of the slider needs to be repeated via

the App.

Multi Slider –User Manual

www.waterbird.at - 4 -

1.3 Mounting and Dismounting on Slider

Mounting Bracket

Together with the Control Unit comes a specialy designed mounting bracket to be mounted

on the carriage of the Slider System.

If you have bought the Control Unit as standalone device you first need to fix the mounting

bracket on your slider system with two countersunk screws.

If you have bought the set with Multi Slider the mounting plate is already fixed on the slider

carriage.

Mounting of Control Unit

To mount the Control Unit on the Mounting Bracket, first push the Control Unit on the

mounting bracket so it is aligned with the hooks, then push the Control Unit to the right side

as shown in picture till the snap-fit is in place.

Dismounting of Control Unit

To dismount the Control Unit from the Mounting Bracket, first push down the snap-fit with a

finger and move the Control Unit to the left while still holding down the snap-fit.

Multi Slider –User Manual

www.waterbird.at - 5 -

1.4 Handling and Safety Instructions

The Control Unit is designed to be mounted with the included mounting bracket. Do not use

another method of fixing the Control Unit to the Slider.

Do not use the Control Unit in wet or humid environment like rain, snow, spray or waterfalls

without extra protection against humidity intrusion in the electronic.

Do not install this Unit near a heater, inflammable material or oily or dusty location or in a

location continuously exposed to direct sunlight or in a location where gas may leak.

Do not cover the Control Unit with Metal Objects to ensure proper operation of the wireless

communication.

Do not attempt to repair, disassemble, or modify the Unit by yourself. There are no serviceable

parts inside and opening the Unit will void the warranty.

Remove all foreign substances such as dust or water from the power plug terminals using a

dry cloth on a regular basis. - Unplug all connectors and clean it with a dry cloth without

alcohol or other solvents.

Do not pull or excessively bend the cables. Do not twist or tie the cables. Do not hook the

cables over a metal object or place a heavy object on the cables. Do not pull the cables, when

unplugging unplug the connector by holding the plug. Do not put force on the cables in any

direction when connected to the Control Unit, this can damage the Control Unit and

connectors.

Before switching on the power to the Control Unit ensure that the Motors can spin feely and

no harm to humans, animals or objects is possible in case the connected motors start moving.

Do not use the Control Unit if it is damaged, the isolation on the cables is damaged or it shows

any abnormality like excessive heat dissipation that damaged the plastic housing.

It is normal that the Control Unit gets warm during operation. To avoid overheating do not

cover the Control Unit with thermally insulating material and allow free airflow.

Multi Slider –User Manual

www.waterbird.at - 6 -

1.5 Troubleshooting

Camera does not trigger/focus when function in app is used.

Please check the trigger cable if properly plugged into the control unit’s CAM socket

and to the camera.

Check if the Camera is switch on.

If focusing is not working check if the camera/lens is set to manual focus.

Some cameras require settings in the menu to allow external trigger cable to be used,

please check with the manual of your camera.

Motor does not start when function in app is used.

Please check if the motor cable is properly plugged into the control unit’s Motor socket

and the right socket is used (Socket A for Slider).

Check if the power supply is connected. If only USB is connected the Control Unit may

connect to the App, but the Motors will not work.

Check if supply voltage is in range 9-16 Vdc (The battery may be empty.)

Check if any error information is shown in the App.

Multi Slider –User Manual

www.waterbird.at - 7 -

1.6 Regulatory Hints

INSTRUCTION ABOUT THE WEEE MARK

Correct Disposal of This Product (Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems) This marking on the

product, accessories or literature indicates that the product and its electronic

accessories (cables, adapters,..) should not be disposed of with other household

waste at the end of their working life. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, please separate these items from other types of

waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their

local government office, for details of where and how they can take these items for

environmentally safe recycling. Business users should contact their supplier and check the

terms and conditions of the purchase contract. This product and its electronic accessories

should not be mixed with other commercial wastes for disposal.

USA:

Table des matières

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur