WAGO 750-650 Manuel utilisateur

Fieldbus Independent

I/O Modules

Serial Interface RS 232 C

750-650 (/xxx-xxx)

Manual

Version 1.0.4

ii • General

WAGO-I/O-SYSTEM 750

I/O Modules

WAGO Kontakttechnik GmbH & Co. KG

Hansastraße 27

D-32423 Minden

Phone: +49 (0) 571/8 87 – 0

Fax: +49 (0) 571/8 87 – 1 69

E-Mail: [email protected]

Web: http://www.wago.com

Technical Support

Phone: +49 (0) 571/8 87 – 5 55

Fax: +49 (0) 571/8 87 – 85 55

E-Mail: [email protected]

Every conceivable measure has been taken to ensure the correctness and com-

pleteness of this documentation. However, as errors can never be fully ex-

cluded, we would appreciate any information or ideas at any time.

E-Mail: [email protected]

We wish to point out that the software and hardware terms as well as the

trademarks of companies used and/or mentioned in the present manual are

generally trademark or patent protected.

Content •iii

WAGO-I/O-SYSTEM 750

I/O Modules

Content

1.1 Scope........................................................................................................4

2I/O Modules.................................................................................................5

2.1 Special Modules.......................................................................................5

4 •0BI/O Modules

Scope

WAGO-I/O-SYSTEM 750

I/O Modules

1.1 Scope

This manual describes the Digital Input Module 750-650 (/xxx-xxx) Serial

Interface RS 232 C of the modular WAGO-I/O-SYSTEM 750.

Handling, assembly and start-up are described in the manual of the Fieldbus

Coupler. Therefore this documentation is valid only in the connection with the

appropriate manual.

750-650 (/xxx-xxx) [Serial Interface RS 232 C] •5

Variations

WAGO-I/O-SYSTEM 750

I/O Modules

2 I/O Modules

2.1 Special Modules

2.1.1 750-650 (/xxx-xxx) [Serial Interface RS 232 C]

2.1.1.1 Variations

Item-No. Designation Description

750-650 RS 232 C/ 9600/ N/ 8/ 1 Baud rate: 9600 baud;

Parity: none; data bits: 8, stop bits: 1

750-650/000-001 RS 232 C/ 9600/ N/ 8/ 1/

5 byte Baud rate: 9600 baud;

Parity: none; data bits: 8,

stop bits: 1, user data: 5 byte

750-650/000-002 RS 232 C/ 9600/ E/ 7/ 2 Baud rate: 9600 baud;

Parity: Even; data bits: 7, stop bits: 2

750-650/000-004 RS 232 C/ 4800/ E/ 7/ 1 Baud rate: 4800 baud;

Parity: Even; data bits: 7, stop bits: 1

750-650/000-006 RS 232 C/ 9600/ E/ 8/ 1 Baud rate: 9600 baud;

Parity: Even; data bits: 8, stop bits: 1

750-650/000-009 RS 232 C/ 2400/ E/ 8/ 1 Baud rate: 2400 baud;

Parity: Even; data bits: 8, stop bits: 1

750-650/000-010 RS 232 C/ 19200/ N/ 8/ 1 Baud rate: 19200 baud;

Parity: None; data bits: 8, stop bits: 1

750-650/000-011 RS 232 C/ 19200/ E/ 8/ 1 Baud rate: 19200 baud;

Parity: Even; data bits: 8, stop bits: 1

750-650/000-012 RS 232 C/ 2400/ N/ 8/ 1 Baud rate: 2400 baud;

Parity: None; data bits: 8, stop bits: 1

750-650/000-013 RS 232 C/ 4800/ E/ 7/ 2 Baud rate: 4800 baud;

Parity: Even; data bits: 7, stop bits: 2

750-650/000-014 RS 232 C/ 2400/ E/ 7/ 2 Baud rate: 2400 baud;

Parity: Even; data bits: 7, stop bits: 2

750-650/000-015 RS 232 C/ 4800/ E/ 8/ 1 Baud rate: 4800 baud;

Parity: Even; data bits: 8, stop bits: 1

750-650/000-016 RS 232 C/ 9600/ O/ 7/ 2/

5 byte Baud rate: 9600 baud;

Parity: Odd; data bits: 7,

stop bits: 2, user data: 5 byte

750-650/003-000 RS 232 C Baud rate and handshake parameterizable

with WAGO-I/O-CHECK 2

6 • 750-650 (/xxx-xxx) [Serial Interface RS 232 C]

View

WAGO-I/O-SYSTEM 750

Busklemmen

2.1.1.2 View

TxD

RTS

13 14

750-650

RxD

CTS

RTS

Data contacts

RxD

CTS

Common

(ground)

Shield

(screen)

TxD

Function

TxD

Shield

(screen)

RxD

Common

(ground)

Fig. 2.1.1-1: View g065000e

2.1.1.3 Description

This interface allows the connection of any device which is equipped with a

RS 232 C serial interface.

The wiring to the communication partner is made by the connections TxD,

RxD, if necessary RTS and CTS as well as ground (earth).

The shield (screen) is directly connected to the carrier rail.

The interface works in accordance with the TIA/EIA-232-F, CCITT V.28/DIN

66259-1 standard.

The connected device may directly communicate over the fieldbus coupler/-

controller with the control unit. The active communication channel works

independently of the higher-level fieldbus system and allows full duplex

operation up to 19200 baud.

Three green LEDs signal readiness for operation and troublefree internal bus

communication as well as the condition of the signal transmission.

The RS 232 interface guarantees high interference immunity because of the

electrically isolated signals.

Any configuration of the specialty modules is possible when designing the

fieldbus node. Grouping of module types is not necessary.

Busklemmen • 7

750-650 (/xxx-xxx) [Serial Interface RS 232 C]

WAGO-I/O-SYSTEM 750

Busklemmen

Attention

This module has no power contacts. For field supply to downstream I/O

modules, a supply module will be needed.

The serial interface module 750-650 and its variations can be used with all

couplers/controllers of the WAGO-I/O-SYSTEM 750 (except for the economy

types 750-320, -323, -324 and -327).

This description is valid from hardware and software version XXXX4108...

and up. The version is specified in the manufacturing number, which is part of

the lateral marking on the module.

8 • 750-650 (/xxx-xxx) [Serial Interface RS 232 C]

Display Elements

WAGO-I/O-SYSTEM 750

Busklemmen

2.1.1.4 Display Elements

LED Channel State Function

off No operational readiness or the

internal data bus communication is

interrupted

A Function

green Operational readiness and trouble-free

internal data bus communication

off 1) signal transfer TxDB TxD

green no signal transfer TxD

off 1) signal transfer RxDD RxD

green no signal transfer RxD or open input

Fig. 2.1.1-2: Display

Elements g065002x

1) The pulses are so short that the off status cannot or only hardly be

recognized with the eyes.

2.1.1.5 Schematic Diagram

Shield

(screen)

TxD RxD

RTS CTS

TxD

RTS

CTS

RxD

Function

Logic

RS 232 C

Shield

(screen)

0V 0V

750-650

Fig. 2.1.1-3: Schematic Diagram g065001e

Busklemmen • 9

750-650 (/xxx-xxx) [Serial Interface RS 232 C]

WAGO-I/O-SYSTEM 750

Busklemmen

2.1.1.6 Technical Data

Module Specific Data

Transmission channel 1 TxD / 1 RxD, full duplex

Baud rate 1200 ... 19200 baud

Bit skew < 3 %

Current consumption max. 55 mA

RS 232 C-line length max. 15 m

Buffer 120 byte in / 16 byte out

Voltage supply via system voltage DC /DC

Isolation 500 V (System/Supply)

Bit width 1 x 40 bits data

1 x 8 bits control/status

Dimensions (mm) W x H x L 12 x 64* x 100

* from upper edge of 35 DIN rail

Weight ca. 55 g

Standards and Regulations (cf. Chapter 2.2 of the Coupler/Controller Manual)

EMC-Immunity to interference (CE) acc. to EN 50082-2 (96)

EMC-Emission of interference (CE) acc. to EN 50081-1 (93)

EMC-Immunity to interference

(Ship building) acc. to Germanischer Lloyd (01)

EMC-Emission of interference

(Ship building) acc. to Germanischer Lloyd (01)

Approvals (cf. Chapter 2.2 of the Coupler/Controller Manual)

CULUS (UL508)

ABS (American Bureau of Shipping)

BV (Bureau Veritas)

DNV (Det Norske Veritas) Cl. B

GL (Germanischer Lloyd) Cat. A, B, C, D

KR (Korean Register of Shipping)

LR (Lloyd's Register) Env. 1, 2, 3, 4

NKK (Nippon Kaiji Kyokai)

PRS (Polski Rejestr Statków)

RINA (Registro Italiano Navale) (only for 750-650)

CULUS (ANSI/ISA 12.12.01) Class I Div2 ABCD T4

10 • 750-650 (/xxx-xxx) [Serial Interface RS 232 C]

Functional description

WAGO-I/O-SYSTEM 750

Busklemmen

DEMKO / IEC I M2 / II 3 G/D Ex nA IIC T4

Conformity Marking

More Information

Detailed references to the approvals are listed in the document "Overview

Approvals WAGO-I/O-SYSTEM 750", which you can find on the CD ROM

ELECTRONICC Tools and Docs (Item-No.: 0888-0412)

or in the internet under: http://www.wago.com Documentation 

WAGO-I/O-SYSTEM 750 System Description

2.1.1.7 Functional description

The interface module is designed to operate with all WAGO I/O fieldbus

couplers. The serial interface module allows the connection of RS 232-

Interface devices to the WAGO I/O SYSTEM. The RS 232 Interface module

can provide gateways within the fieldbus protocol. This allows serial

equipment such as printers, barcode readers, and links to local operator

interfaces to communicate directly by the fieldbus protocol with the PLC or

PC Master. This module supports no higher level of protocol. Communication

is made completely transparent to the fieldbus allowing flexibility in further

applications of the serial interface module. The communication protocols are

configured at the Master PLC or PC.

The 120 byte input buffer provides for high rates of data transmission. When

using lower rates of transmission speed you can collect the received data, with

less priority, without loosing data.

The 16 byte output buffer provides for faster transmission of larger data

strings.

Attention

The data transmission takes place at 9.600 baud. 1 startbit, 8 databits and 1

stopbit will be transmitted. No parity is available. The user controls data via

the RTS and CTS signals. These signals are generated in the module

depending on the loading status of the buffers. These controls can be

deactivated by means of an external jumper. RTS and CTS are to be

connected.

Attention

For testing purposes the Windows terminal emulation can be used. A

cable with a 9- pole sub-D socket is required. Pin 5 is connected to input

"common". Pin 2 is connected to TxD and Pin 3 to RxD. RTS and CTS of

the module are connected. A hardwarehandshake between the terminal

emulation and the PLC is not possible.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels WAGO Système d'E/S

WAGO

WAGO 750-496 Manuel utilisateur

WAGO

WAGO I/O System 750 750-483 Manuel utilisateur

WAGO

WAGO I/O-SYSTEM 750 Manuel utilisateur

WAGO

WAGO 750-496 Manuel utilisateur

WAGO

WAGO 765-1505/100-000 Manuel utilisateur

WAGO

WAGO I/O-SYSTEM 750 Manuel utilisateur

WAGO

WAGO I/O SYSTEM 750 750-641 Manuel utilisateur

WAGO

WAGO 750 Series Manuel utilisateur

WAGO

WAGO 750-482/000-001 Manuel utilisateur

WAGO

WAGO 750-880 Manuel de service

WAGO

WAGO I/O-SYSTEM 750-666/000-003 Manuel utilisateur

WAGO

WAGO 750-540 Manuel utilisateur

WAGO

WAGO I/O System 750 750-622 Manuel utilisateur

WAGO

WAGO I/O SYSTEM 750 Manuel utilisateur

WAGO

WAGO WAGO-I/O-SYSTEM 752 Manuel utilisateur

WAGO

WAGO 750-440 Manuel utilisateur

WAGO

WAGO 750-344 Manuel utilisateur

WAGO

WAGO I/O-SYSTEM 750-517 Manuel utilisateur

WAGO

WAGO 750-402 Manuel utilisateur

WAGO

WAGO 750 Series Manuel utilisateur

WAGO

WAGO 750 Series Manuel utilisateur

WAGO

WAGO LONWORKS 750-319 Manuel utilisateur

WAGO

WAGO 750-341 Manuel utilisateur

WAGO

WAGO I/O SYSTEM 750 Manuel utilisateur

Manuels Système d'E/S populaires d'autres marques

Teknim

Teknim TWM-1887 Mode d’emploi

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuel utilisateur

BERGHOF

BERGHOF ECC DIO 16/16 Mode d’emploi

Advantech

Advantech PCM-27J3AU Manuel d'installation et d'exploitation

Festo

Festo CP-E08-M12-CL Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuel utilisateur

Hitachi

Hitachi HX-RIO3 Series Manuel utilisateur

NUUO

NUUO SCB-A08 Manuel utilisateur

M-system

M-system R3Y-RS8 Manuel utilisateur

jablotron

jablotron JB-110N Manuel utilisateur

Omron

Omron SYSMAC C200H Manuel utilisateur

DOLD

DOLD SAFEMASTER M Manuel utilisateur

ABB

ABB OPT-MF-001 Manuel utilisateur

Omron

Omron SYSMAC C2000H Manuel utilisateur

Helmholz

Helmholz TB20 Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-AD2 Manuel utilisateur

Automationdirect.com

Automationdirect.com DL305 Manuel utilisateur

Contec

Contec PIO-16L(PCI)H Manuel utilisateur