Automationdirect.com DL305 Manuel utilisateur

DL305

Analog I/O Modules

Manual NumberD3--ANLG-M

WARNING

Thank you forpurchasing automation equipment fromAutomationdirect.comä.WewantyournewDirectLOGICä

automation equipment to operatesafely.Anyone who installsorusesthisequipmentshouldread thispublication (and

anyother relevantpublications)beforeinstalling oroperating the equipment.

Tominimizethe risk ofpotentialsafetyproblems,you shouldfollowall applicablelocaland nationalcodesthatregulate

the installation and operation ofyourequipment. Thesecodes varyfromarea to area and usually change withtime. It is

your responsibilityto determine whichcodes should be followed,and toverifythat the equipment, installation,and

operation isincompliancewiththe latestrevision of thesecodes.

Ataminimum,you shouldfollowall applicablesectionsof the NationalFireCode,NationalElectricalCode,and the

codesof the NationalElectricalManufacturer’sAssociation (NEMA).Theremaybe localregulatoryorgovernment

officesthatcan also help determine whichcodesand standardsare necessaryforsafeinstallation and operation.

Equipmentdamage orseriousinjuryto personnelcan result fromthe failuretofollowall applicablecodesand

standards.We do notguarantee the productsdescribed inthispublication aresuitableforyourparticularapplication,

nordo we assume anyresponsibilityforyourproductdesign,installation,oroperation.

If you have anyquestions concerning the installation oroperation of thisequipment, orifyou need additional

information,pleasecall usat1--770--844--4200 orFAX 1--770--886--3199.

Thispublication isbased on information thatwasavailable at the timeitwasprinted.AtAutomationdirect.comäwe

constantly strivetoimprove ourproductsand services,sowereservethe right tomakechangestothe productsand/or

publicationsatanytimewithoutnotice and withoutanyobligation.Thispublication mayalso discuss featuresthatmay

notbe availableincertainrevisionsof the product.

Trademarks

Thispublication may containreferencesto productsproduced and/oroffered byothercompanies.The productand

companynamesmaybe trademarked and arethe sole propertyof their respective owners.Automationdirect.comä

disclaimsanyproprietaryinterestinthe marks and namesofothers.

Stage isatrademarkofKoyoElectronics IndustriesCo., LTD.Think&DoSoftwareisatrademarkofThink&Do

Software, Inc.TexasInstrumentsisaregistered trademarkofTexasInstruments, Inc.TI, TIWAY,Series305,Series

405,TI305,and TI405 aretrademarks ofTexasInstruments, Inc.Siemensand SIMATICareregistered trademarks of

Siemens,AG.GEisaregistered trademarkofGeneralElectricCorporation.SeriesOne isaregistered trademarkof

GEFanucAutomation NorthAmerica, Inc.MODBUSisaregistered trademarkofGould, Inc. IBMisaregistered

trademarkof InternationalBusiness Machines.MS-DOSand Microsoft areregistered trademarks ofMicrosoft

Corporation.Windowsand WindowsNTaretrademarks ofMicrosoft Corporation.OPTOMUXand PAMUXare

trademarks ofOPTO22.

All RightsReserved

No partof thismanualshall be copied,reproduced,ortransmitted in anywaywithout the prior,written consentof

Automationdirect.comäIncorporated.Automationdirect.comäretainsthe exclusiverightsto all information

included inthisdocument.

If you contactusinreferencetothismanual,be suretoinclude the revision number.

Title:DL305 Analog I/O Modules,2nd Edition,Rev.C

ManualNumber:D3--ANLG--M

IssueDateEffective Pages Description ofChanges

Original1/94 Cover/Copyright

Contents

Manual Revisions

1-1-- 1-9

2-1-- 2-18

3-1-- 3-20

4-1-- 4-15

5-1-- 5-21

6-1-- 6-12

7-1-- 7-14

8-1-- 8-17

9-1-- 9-16

10-1-- 10-14

A-1-- A-10

OriginalIssue

2nd Edition 3/96 Cover/Copyright

Contents

Manual Revisions

1-1-- 1-9

2-1-- 2-18

3-1-- 3-20

4-1-- 4-15

5-1-- 5-21

6-1-- 6-13

7-1-- 7-14

8-1-- 8-18

9-1-- 9-16

10-1-- 10-14

A-1-- A-10

2nd Edition

Rev.A4/96 Manual Revisions

7--13

8--17

Rev.A

Changed lastinstruction toDOUT3

Rev.B6/98 EntireManual

Manual Revisions

7--10,7--11,7--13 and 8--17

Downsized tospiral

Rev.B

Corrected sequencing examples

Rev.C11/99 3--13,18;4--11,12,17;

5-16to19,24;9-12,13;

10--14to16;Appx.A--11to19

Added example programsforthe D3--350

CPU.

Chapter1:Getting Started

Introduction 1--2.........................................................................

Purpose of thismanual1--3.............................................................

Who shouldread thismanual1--3.......................................................

Howthismanual isorganized 1--3.......................................................

SupplementalManuals1--3.............................................................

DL305 Analog Components 1--4..........................................................

DL305 Analog I/O 1--4.................................................................

ThermocoupleInput1--4...............................................................

TemperatureInput1--4.................................................................

PhysicalCharacteristics 1--5.............................................................

Selecting theAppropriateModule 1--6....................................................

Analog Input1--6......................................................................

Analog Output1--7....................................................................

SpecialInput1--7.....................................................................

Analog MadeEasy -- FourSimpleSteps 1--8...............................................

Analog InputTerminology 1--9............................................................

Channelsper Module 1--9..............................................................

InputRanges1--9.....................................................................

Resolution 1--9........................................................................

InputType 1--9........................................................................

Input Impedance 1--9..................................................................

Conversion Method 1--9................................................................

Conversion Time 1--9..................................................................

LinearityErrorand TotalTolerance(RelativeAccuracy)1--9.................................

Accuracy vs.Temperature 1--9..........................................................

LED Display1--9......................................................................

I/O PointsRequired 1--9................................................................

ExternalPowerSource 1--9.............................................................

BasePowerRequired 1--9..............................................................

Operating Temperature 1--9............................................................

RelativeHumidity1--9.................................................................

TerminalType 1--9.....................................................................

Weight1--9...........................................................................

Analog Output ModuleTerminology 1--10..................................................

Channelsper Module 1--10..............................................................

OutputRanges1--10....................................................................

Resolution 1--10........................................................................

OutputCurrent1--10....................................................................

Output Impedance 1--10................................................................

Load Impedance 1--10..................................................................

Conversion Time 1--10..................................................................

Accuracy 1--10.........................................................................

Accuracy vs.Temperature 1--10..........................................................

LED Display1--10......................................................................

Table ofContents

ExternalPowerSource 1--10.............................................................

BasePowerRequired 1--10..............................................................

Operating Temperature 1--10............................................................

RelativeHumidity1--10.................................................................

TerminalType 1--10.....................................................................

Weight1--10...........................................................................

I/O PointsRequired 1--10................................................................

Chapter2:D3--04AD4-ChannelAnalog Input

ModuleSpecifications 2--2...............................................................

Analog InputConfiguration Requirements2--2............................................

Setting theModule Jumpers 2--3.........................................................

Connecting theFieldWiring 2--3..........................................................

Wiring Guidelines2--3.................................................................

UserPowerSupplyRequirements2--3...................................................

CustomInputRanges2--4..............................................................

CurrentLoop TransmitterImpedance 2--5................................................

RemovableConnector2--6.............................................................

Wiring Diagram2--6...................................................................

ModuleOperation 2--7...................................................................

ChannelScanning Sequence 2--7.......................................................

Understanding the I/O Assignments2--8.................................................

All ChannelScan Output2--8...........................................................

SingleChannelScan Outputs2--9.......................................................

ActiveChannelSelection Inputs2--9.....................................................

Analog DataBits2--10..................................................................

Writing theControlProgram2--11.........................................................

Identifying the Data Locations2--11.......................................................

SingleChannelon EveryScan 2--11......................................................

Reading MultipleChannelsoverAlternating Scans2--12....................................

Single or MultipleChannels2--13.........................................................

Scaling the InputData 2--14.............................................................

Analog and DigitalValue Conversions2--18................................................

Chapter3:F3--04ADS4-ChannelIsolated Analog Input

ModuleSpecifications 3--2...............................................................

Analog InputConfiguration Requirements3--2............................................

Setting theModule Jumpers 3--3.........................................................

JumperLocations3--3.................................................................

Selecting the NumberofChannels3--4...................................................

Selecting InputSignal Ranges3--4......................................................

Connecting theFieldWiring 3--5..........................................................

Wiring Guidelines3--5.................................................................

UserPowerSupplyRequirements3--5...................................................

CustomInputRanges3--5..............................................................

CurrentLoop TransmitterImpedance 3--6................................................

RemovableConnector3--7.............................................................

Wiring Diagram3--7...................................................................

Table ofContents

ModuleOperation 3--8...................................................................

ChannelScanning Sequence 3--8.......................................................

Understanding the I/O Assignments3--9.................................................

ActiveChannelSelection Inputs3--9.....................................................

Analog DataBits3--10..................................................................

Writing theControlProgram3--11.........................................................

Identifying the Data Locations3--11.......................................................

SingleChannelon EveryScan 3--11......................................................

Reading MultipleChannelsoverAlternating Scans3--12....................................

Scaling the InputData 3--13.............................................................

Analog and DigitalValue Conversions3--1................................................

Chapter4:F3--08AD8-ChannelAnalog Input

ModuleSpecifications 4--2...............................................................

Analog InputConfiguration Requirements4--2............................................

Setting theModule Jumpers 4--3.........................................................

JumperLocations4--3.................................................................

Selecting the NumberofChannels4--3...................................................

Connecting theFieldWiring 4--4..........................................................

Wiring Guidelines4--4.................................................................

UserPowerSupplyRequirements4--4...................................................

CurrentLoop TransmitterImpedance 4--4................................................

RemovableConnector4--5.............................................................

Wiring Diagram4--5...................................................................

ModuleOperation 4--6...................................................................

ChannelScanning Sequence 4--6.......................................................

Understanding the I/O Assignments4--7.................................................

ActiveChannelIndication Inputs4--7....................................................

Analog DataBits4--8..................................................................

Writing theControlProgram4--9.........................................................

Identifying the Data Locations4--9.......................................................

SingleChannelon EveryScan 4--9......................................................

Reading MultipleChannelsoverAlternating Scans4--10....................................

Reading MultipleChannelsoverAlternating ScansonaDL350 4--11..........................

Scaling the InputData 4--13.............................................................

Scaling the InputDataonaDL350 4--17..................................................

Analog and DigitalValue Conversions4--18................................................

Chapter5:F3--16AD16-ChannelAnalog Input

ModuleSpecifications 5--2...............................................................

Analog InputConfiguration Requirements5--2............................................

Setting theModule Jumpers 5--3.........................................................

JumperLocations5--3.................................................................

Selecting the NumberofChannels5--3...................................................

Selecting InputSignal Ranges5--4......................................................

GainJumpers5--5.....................................................................

VariableGainAdjustment5--5..........................................................

Table ofContents

Connecting theFieldWiring 5--6..........................................................

Wiring Guidelines5--6.................................................................

UserPowerSupplyRequirements5--6...................................................

CustomInputRanges5--7..............................................................

CurrentLoop TransmitterImpedance 5--8................................................

RemovableConnector5--9.............................................................

Wiring Diagram5--9...................................................................

ModuleOperation 5--10...................................................................

ChannelScanning Sequence 5--10.......................................................

Understanding the I/O Assignments5--11.................................................

ActiveChannelIndicatorInputs5--12.....................................................

Analog DataBits5--13..................................................................

Writing theControlProgram5--14.........................................................

Identifying the Data Locations5--14.......................................................

ExampleProgram5--15.................................................................

ExampleProgramforaDL350 withaConventionalBase 5--16...............................

ExampleProgramforaDL350 withaD3--XX--1Base 5--17..................................

Scaling the InputData 5--20.............................................................

Scaling the InputDataonaDL350 withaConventionalBase 5--24...........................

Broken TransmitterDetection 5--25.......................................................

Analog and DigitalValue Conversions5--26................................................

Chapter6:D3--02DA2--ChannelAnalog Output

ModuleSpecifications 6--2...............................................................

Analog OutputConfiguration Requirements6--2...........................................

Connecting theFieldWiring 6--3..........................................................

Wiring Guidelines6--3.................................................................

UserPowerSupplyRequirements6--3...................................................

Load Requirements6--3................................................................

RemovableConnector6--4.............................................................

Wiring Diagram6--4...................................................................

ModuleOperation 6--5...................................................................

ChannelScanning Sequence 6--5.......................................................

Understanding the I/O Assignments6--6.................................................

Analog DataBits6--7..................................................................

Writing theControlProgram6--8.........................................................

Identifying the Data Locations6--8.......................................................

Calculating the DigitalValue 6--8........................................................

Sending the SameDatatoBothChannels6--11............................................

Sending SpecificDatatoEachChannel6--12..............................................

Analog and DigitalValue Conversions6--13................................................

Chapter7:F3--04DA--1 4-ChannelAnalog Output

ModuleSpecifications 7--2...............................................................

Analog OutputConfiguration Requirements7--2...........................................

Setting theModule Jumpers 7--3.........................................................

JumperLocations7--3.................................................................

Table ofContents

Selecting OutputSignal Ranges7--3.....................................................

Connecting theFieldWiring 7--4..........................................................

Wiring Guidelines7--4.................................................................

UserPowerSupplyRequirements7--4...................................................

Load Requirements7--4................................................................

RemovableConnector7--5.............................................................

Wiring Diagram7--5...................................................................

ModuleOperation 7--6...................................................................

ChannelScanning Sequence 7--6.......................................................

Understanding the I/O Assignments7--7.................................................

ChannelSelection Inputs7--7...........................................................

Analog DataBits7--8..................................................................

Writing theControlProgram7--9.........................................................

Identifying the Data Locations7--9.......................................................

Calculating the DigitalValue 7--9........................................................

Sending DatatoaSingleChannel7--12...................................................

Sequencing the Channel Updates7--13...................................................

Sequencing Example 7--13..............................................................

Analog and DigitalValue Conversions7--14................................................

Chapter8:F3--04DAS 4-ChannelIsolated Analog Output

ModuleSpecifications 8--2...............................................................

Analog OutputConfiguration Requirements8--3...........................................

Setting theModule Jumpers 8--4.........................................................

JumperLocations8--4.................................................................

Selecting InputSignal Ranges8--5......................................................

SpecialOutputSignal Ranges8--6......................................................

Connecting theFieldWiring 8--7..........................................................

Wiring Guidelines8--7.................................................................

UserPowerSupplyRequirements8--7...................................................

Load Requirements8--7................................................................

RemovableConnector8--8.............................................................

Wiring Diagram8--8...................................................................

Combining Voltage Outputs8--8.........................................................

Combining Current Outputs8--9.........................................................

ModuleOperation 8--10...................................................................

ChannelScanning Sequence 8--10.......................................................

Understanding the I/O Assignments8--11.................................................

ChannelSelection Inputs8--11...........................................................

Analog DataBits8--12..................................................................

Writing theControlProgram8--13.........................................................

Identifying the Data Locations8--13.......................................................

Calculating the DigitalValue 8--13........................................................

Sending DatatoaSingleChannel8--16...................................................

Sequencing the Channel Updates8--17...................................................

Analog and DigitalValue Conversions8--18................................................

Table ofContents

Chapter9:F3--08THM--n 8-ChannelThermocoupleInput

Introduction 9--2.........................................................................

AutomaticConversion 9--2.............................................................

HardwareFeatures9--2................................................................

DiagnosticFeatures9--2...............................................................

ModuleSpecifications 9--3...............................................................

Analog InputConfiguration Requirements9--3............................................

Setting theModuleSwitches 9--4.........................................................

JumperLocations9--4.................................................................

Selecting °For°COperation 9--4........................................................

Selecting 0--4095 Operation 9--4........................................................

Connecting theFieldWiring 9--5..........................................................

Wiring Guidelines9--5.................................................................

UserPowerSupplyRequirements9--5...................................................

Wiring Diagram9--5...................................................................

ModuleOperation 9--6...................................................................

ChannelScanning Sequence 9--6.......................................................

Understanding the I/O Assignments9--7.................................................

ActiveChannelIndicatorInputs9--7.....................................................

TemperatureSign Bit9--8..............................................................

Analog DataBits9--8..................................................................

TemperatureInputResolution 9--8.......................................................

Millivolt InputResolution 9--8...........................................................

Writing theControlProgram9--9.........................................................

Identifying the Data Locations9--9.......................................................

AutomaticTemperatureConversion 9--9..................................................

Using the Sign Bit9--11.................................................................

Reading MultipleChannelsonaDL350 withaD3--XX--1Base 9--12..........................

Scaling the InputData 9--14.............................................................

Temperature and DigitalValue Conversions9--18...........................................

Millivoltand DigitalValue Conversions9--18...............................................

Chapter10:F3--08TEMP8-ChannelTemperatureInput

ModuleSpecifications 10--2...............................................................

CompatibleTemperatureProbe Specifications10--3........................................

Analog InputConfiguration Requirements10--3............................................

Setting theModule Jumpers 10--4.........................................................

FactorySettings10--4...................................................................

Selecting the NumberofChannels10--4...................................................

Connecting theFieldWiring 10--5..........................................................

Wiring Guidelines10--5.................................................................

UserPowerSupplyRequirements10--5...................................................

RemovableConnector10--5.............................................................

Wiring Diagram10--5...................................................................

Table ofContents

ModuleOperation 10--6...................................................................

ChannelScanning Sequence 10--6.......................................................

Understanding the I/O Assignments10--7.................................................

ActiveChannelIndicatorInputs10--7.....................................................

Analog DataBits10--8..................................................................

TemperatureInputResolution 10--8.......................................................

Writing theControlProgram10--9.........................................................

Identifying the Data Locations10--9.......................................................

Reading the DigitalValue 10--9...........................................................

Converting the DatatoTemperature 10--10.................................................

Reading TemperaturesBelowZero 10--12..................................................

Storing the Temperature 10--13...........................................................

Reading TemperaturesonaDL350 withaD3--XX--1Base 10--14..............................

Temperature and DigitalValue Conversions10--17...........................................

AppendixA:DL305 DataTypesand MemoryMap

DL330 MemoryMapA--2.................................................................

DL330PMemoryMapA--3................................................................

DL340 MemoryMapA--4.................................................................

I/O PointBit MapA--5....................................................................

ControlRelay Bit MapA--6...............................................................

SpecialRelays A--8......................................................................

DataRegistersA--9......................................................................

DL350 SystemV--MemoryA--11............................................................

DL350 Comm Port2Control Relays A--12.................................................

DL350 MemoryMapA--13.................................................................

DL350 XInput/YOutputBit MapA--14......................................................

DL350 ControlRelay Bit MapA--15.........................................................

DL350 StagetControl/StatusBit MapA--17...............................................

DL350 Timerand CounterStatusBit MapsA--19............................................

Table des matières

Autres manuels Automationdirect.com Système d'E/S

Automationdirect.com

Automationdirect.com Productivity 2000 P2-04AD Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08NE3 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16AD-1 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 1000 P1-04ADL-2 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-32NE3 Manuel utilisateur

Automationdirect.com

Automationdirect.com Stride SIO-MB04THMS Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08NAS Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16NE3 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16ADL-2 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08ADL-2 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-08AD-2 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-06RTD Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 1000 P1-15CDD1 Manuel utilisateur

Automationdirect.com

Automationdirect.com Stride SIO-MB08THMS Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 1000 P1-08NA Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 1000 P1-08ND3 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 3000 P3-08AD Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 1000 P1-16NE3 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-07B Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 1000 P1-15CDD2 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16AD-2 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 1000 P1-4ADL2DAL-1 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 200 Manuel utilisateur

Automationdirect.com

Automationdirect.com Productivity 2000 P2-16NA Manuel utilisateur

Manuels Système d'E/S populaires d'autres marques

WAGO

WAGO 750-344 Manuel utilisateur

Teknim

Teknim TWM-1887 Mode d’emploi

Intelligent Appliance

Intelligent Appliance IA-2662-E Manuel utilisateur

BERGHOF

BERGHOF ECC DIO 16/16 Mode d’emploi

Advantech

Advantech PCM-27J3AU Manuel d'installation et d'exploitation

Festo

Festo CP-E08-M12-CL Manuel utilisateur

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Manuel utilisateur

Hitachi

Hitachi HX-RIO3 Series Manuel utilisateur

NUUO

NUUO SCB-A08 Manuel utilisateur

M-system

M-system R3Y-RS8 Manuel utilisateur

jablotron

jablotron JB-110N Manuel utilisateur

Omron

Omron SYSMAC C200H Manuel utilisateur

DOLD

DOLD SAFEMASTER M Manuel utilisateur

ABB

ABB OPT-MF-001 Manuel utilisateur

Omron

Omron SYSMAC C2000H Manuel utilisateur

Helmholz

Helmholz TB20 Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-AD2 Manuel utilisateur

WAGO

WAGO I/O-SYSTEM 750 Manuel utilisateur