Volt VPL-1012-BBZ Manuel utilisateur

VOLT®Low Voltage Landscape Lighting

VOLT® Brass Regal Path & Area Light

VPL-1012-BBZ

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

VOLT®Regal Path & Area Light

VPL-1012-BBZ

Package Contents

Product Dimensions

INSTALLATION INSTRUCTIONS

A. (1) Fixture Body

B. (1) Fixture Hood

www.voltlighting.com [email protected] • 813.978.3700

9”

3”

25.5”

C. (1) Inner Shade

D. (1) Stake

Parts Required

A. (1) LED Bulb

- 2 - - 3 -

Important: Please Read Before Installation

IMPORTANT SAFETY INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situation.

1. Make sure that the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or

more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL Listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm)

7. If additional lengths of low voltage cable is required, please contact www.

voltlighting.com or call 1-813-978-3700.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn off/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damage shield.

SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

www.voltlighting.com

VOLT®Regal Path & Area Light

VPL-1012-BBZ

[email protected] • 813.978.3700

Install Fixture Body to Stake

Fixture Body

Stake

Pigtail

Wireway Slot

Remove Hat and Inner Shield

Remove the nial and the hat from the

inner shield. Pull the inner shield off of

the xture body to expose the socket.

Finial

Fixture

Body

Inner Shield

Install Lamp

Insert the bulb with the correct

wattage and type marked on the

xture label.

CAUTION: Do not exceed maximum

wattage marked on luminaire label.

NOTE: DO NOT touch bulb with bare

hands. Use a soft cloth to handle bulb.

Socket

Bulb

Install Stake

Board

Stake

Soil

Ground

- 4 - - 5 -

Install Hat and Inner Shield

Push the inner shade onto the xture

body. Place the hat back onto the

inner shield and secure with the nial

previously removed. Hand tighten.

Hat

Fixture

Body

Inner Shield

Determine the desired location for mounting

the xture. Hammer the stake into ground

until ange of stake is ush to grade. To avoid

damage to the stake, place a board on top of

the stake while hammering.

NOTE: If the ground is hard and the stake is

difcult to install, make a crosscut in ground

using a at shovel.

Clear away area in the ground at the

wireway slot on top of the stake. Lay

the luminaire pigtail into the wireway

slot and thread the stem into the

stake. Tighten to secure the base.

Hat

Finial

INSTALLATION INSTRUCTIONS

www.voltlighting.com

VOLT®Regal Path & Area Light

VPL-1012-BBZ

Install/Replace Bulb

Please refer to Step 2 - Step 4 to expose the Lamp and replace it with the

correct wattage and type marked on the xture label.

IMPORTANT: LED Lamp must be protected from moisture and dust at all

times. Always reinstall lens when removed.

- 6 -

Wire Connection

Pigtail

Main Supply Cable

Wire Connectors

Strip both leads from the luminaire pigtail. Using two wire connectors

(sold separately), connect the leads from the luminaire to the main low

voltage supply cable leads.

- 8 -

Specications and product details subject to change without notice.

reserved. [email protected] • 813.978.3700

www.voltlighting.com

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Table des matières

Autres manuels Volt Éclairage paysager

Volt

Volt VAL-9501-4036-BBZ Manuel utilisateur

Volt

Volt All-Star Brass Tommy Light Manuel utilisateur

Volt

Volt 3602 Series Manuel utilisateur

Volt

Volt VAL-180 Manuel utilisateur

Volt

Volt All-Star VAL-1814-40-BBZ Manuel utilisateur

Volt

Volt VWL-705 Manuel utilisateur

Volt

Volt VHS-668-4-BBZ Manuel utilisateur

Volt

Volt VPL-1043-4-BBZ Manuel utilisateur

Volt

Volt VAL-2006-4-BBZ Manuel utilisateur

Volt

Volt VAC-STK-PWR-PGR Manuel utilisateur

Volt

Volt VPL-3025 Series Manuel utilisateur

Volt

Volt VAL-2101-0-BBZ Manuel utilisateur

Volt

Volt VAL-91 Series Instructions d'utilisation et de sécurité

Volt

Volt Big Par36 Brass Black Flood Manuel utilisateur

Volt

Volt VHS-67 Series Manuel utilisateur

Volt

Volt VDL-6008-4-BBZ Manuel utilisateur

Volt

Volt All Star Mini Twinnovator Manuel utilisateur

Volt

Volt VWL-703-BBZ Manuel utilisateur

Volt

Volt VPL-1002 Series Manuel utilisateur

Volt

Volt 390 Series Manuel utilisateur

Volt

Volt Fat Boy Mini Spotlight Manuel utilisateur

Volt

Volt VAL-2049-35-4-BBZ Manuel utilisateur

Volt

Volt STK-17LI Series Manuel utilisateur

Volt

Volt VAL-2015-BBZ Manuel utilisateur

Manuels Éclairage paysager populaires d'autres marques

Intex

Intex SL1006 Manuel utilisateur

LED Group

LED Group ROBUS R2IN13W Manuel utilisateur

Patriot Lighting

Patriot Lighting 343-1484 Manuel utilisateur

Hess

Hess SERA G: SERA S Manuel utilisateur

LIGMAN

LIGMAN JET 44 Manuel utilisateur

LIGMAN

LIGMAN MALTA 1 Manuel utilisateur

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manuel utilisateur

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manuel utilisateur

Saxby Lighting

Saxby Lighting Islay 68784 Manuel

LIGMAN

LIGMAN EU-10016-3 Manuel utilisateur

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manuel utilisateur

LIGMAN

LIGMAN KI-60475 Manuel utilisateur

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manuel utilisateur

Malibu Boats

Malibu Boats CL905K Manuel utilisateur

LIGMAN

LIGMAN NYB-30161 Manuel utilisateur

LIGMAN

LIGMAN SI-80021 Manuel utilisateur

Malibu Boats

Malibu Boats CM110P Manuel utilisateur

U.S.T.E.

U.S.T.E. VISTA 8202 Manuel utilisateur