Volt All-Star VAL-1814-40-BBZ Manuel utilisateur

VOLT®Low Voltage Landscape Lighting

VOLT®All-StarTM Downlight

VAL-1814-40-BBZ

INSTALLATION INSTRUCTIONS

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

- 1 -

Package Contents

Product Dimensions

Important: Please Read Before Installation

INSTALLATION INSTRUCTIONS

This luminaire is intended for installation in accordance with local codes

and the National Electric Code (NEC). Failure to adhere to these codes and

instructions may result in serious injury, property damage and void the

warranty.

These instructions do not intend to cover all variations in installation,

operation maintenance or mounting situations.

1. Make sure the power is turned OFF before installing or servicing this

luminaire.

2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M)

or more from pool, spa or fountain.

3. This luminaire is intended to be used only with a power supply

(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.

4. Wiring connections must be made with UL listed wire connectors that are

suitable for outdoor use.

5. Position the low voltage wire and wire connector so that it is located

within 6 inches (15.2 cm) from a building structure, a luminaire or

tting.

6. The main low voltage cable is intended for shallow burial - less than 6

inches (152 mm).

7. If additional lengths of low voltage cable are required, please contact

www.voltlighting.com or call 1-813-978-3700.

A. (1) Fixture Body

B. (1) Glare Guard

C. (1) Allen Key

www.voltlighting.com [email protected] • 813.978.3700

3.25”

Important Safety Instructions

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS

Lighted lamp is HOT!

WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.

1. Turn o/unplug and allow to cool before replacing lamp.

2. Lamp gets HOT quickly! Contact only switch/plug when turning on.

3. Do not touch the hot lens, guard or enclosure.

4. Keep lamp away from materials that may burn.

5. Do not touch lamp at any time. Use a soft cloth. Oil from skin may

damage lamp.

6. Do not operate the luminaire tting with a missing or damaged shield.

SAVE THESE INSTRUCTIONS

- 2 - - 3 -

5”

6.25”

7.63”

2.5”

VOLT®All-StarTM Downlight

VAL-1814-40-BBZ

INSTALLATION INSTRUCTIONS

www.voltlighting.com [email protected] • 813.978.3700

Install Base

Pull the supply wire through

the gap on the base. Attach the

base onto the tree by securing

with the screws. Tighten with a

screwdriver.

Place the supply wire through the base and thread the base onto the

xture body. Make sure the gap on the base and the xture body are

in the same direction. Tighten the lock nut against the base.

Fixture Body

Lock Nut

Supply Wire

Tree

Base

Screw

Gap

- 4 - - 5 -

Install Fixture to Base

Remove Glare Guard

Loosen the set screw and remove

the glare guard from the xture

body.

REMOVE

Fixture Body

Set Screw

Glare Guard

Remove Lens

Rotate the lens to remove it

from the xture body.

Fixture Body

Lens

Wire Connection

Strip both leads from the luminaire

pigtail. Using two wire connectors (sold

separately), connect the leads from the

luminaire to the main supply cable leads.

Main Supply Cable

Wire Connectors

Fixture

Pigtail

VOLT®All-StarTM Downlight

VAL-1814-40-BBZ

INSTALLATION INSTRUCTIONS

www.voltlighting.com

- 6 -

[email protected] • 813.978.3700

- 7 -

Bulb Installation

Install MR16 Bulb

Insert the MR16 bulb with the

correct wattage and type marked

on the xture label and secure

into place.

CAUTION: Do not exceed

maximum wattage marked on

luminaire label.

MR16 Bulb

Socket

Install Lens

Place the lens back onto the

xture body and rotate it until it

is secured properly.

Fixture Body

Lens

Install Glare Guard

Install the glare guard back onto

the xture body and secure with

previously removed set screw.

Hand tighten until snug.

Fixture Body

Set Screw

Glare Guard

By using an Allen wrench, loosen

the set screw on the knuckle

and adjust the xture body to

the desired direction. Once the

desired direction is achieved,

tighten the set screw to secure.

ROTATE

Adjust Fixture Direction

Fixture Body

Allen Wrench

Set Screw

Remove the glare guard and the lens to expose the MR16 bulb and replace it

with the correct wattage and type marked on the xture label. Then,

reinstall the lens and the glare guard.

IMPORTANT: MR16 bulb must be protected from moisture and dust at all

times. Always reinstall the lens and the glare guard when removed.

Install/Replace Bulb

VOLT®All-StarTM Downlight

VAL-1814-40-BBZ

- 8 -

Specications and product details subject to change without notice.

[email protected] • 813.978.3700

www.voltlighting.com

IS-VAL-1814-ver1.pdf

Help Hotline:

1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

Autres manuels Volt Éclairage paysager

Volt

Volt VAL-1004-BBZ Manuel utilisateur

Volt

Volt VPL-1050-4-BBZ Manuel utilisateur

Volt

Volt VPL-370 Series Manuel utilisateur

Volt

Volt VHS-6720-X-BBZ-R1 Manuel utilisateur

Volt

Volt VPL-1043-4-BBZ Manuel utilisateur

Volt

Volt All Star Mini Twinnovator Manuel utilisateur

Volt

Volt VSDL-6013-BBZ Manuel utilisateur

Volt

Volt VPL-1019-26-4-BBZ Manuel utilisateur

Volt

Volt VFL-4002-ABZ Manuel utilisateur

Volt

Volt VSM-2407 Manuel utilisateur

Volt

Volt VDL-6007 Manuel utilisateur

Volt

Volt VAL-2000-4-BBZ Manuel utilisateur

Volt

Volt VSM-2407 Manuel utilisateur

Volt

Volt 3602 Series Manuel utilisateur

Volt

Volt VPL-1048-4-BBZ Manuel utilisateur

Volt

Volt VFL-4001-LI-ABZ Manuel utilisateur

Volt

Volt VUL-6703 BBZ Series Manuel utilisateur

Volt

Volt STK-17LI Series Manuel utilisateur

Volt

Volt VWL-510 Series Manuel utilisateur

Volt

Volt VSPL-9001-25-BBZ Manuel utilisateur

Volt

Volt VHS-6726-8-BRB Manuel utilisateur

Volt

Volt VSAC-PANEL1-SBK Manuel utilisateur

Volt

Volt VHS-6719-BBZ Manuel utilisateur

Volt

Volt VAL-2002 Manuel utilisateur

Manuels Éclairage paysager populaires d'autres marques

Intex

Intex SL1006 Manuel utilisateur

LED Group

LED Group ROBUS R2IN13W Manuel utilisateur

Patriot Lighting

Patriot Lighting 343-1484 Manuel utilisateur

Hess

Hess SERA G: SERA S Manuel utilisateur

LIGMAN

LIGMAN JET 44 Manuel utilisateur

LIGMAN

LIGMAN MALTA 1 Manuel utilisateur

Cooper Lighting

Cooper Lighting MCGRAW-EDISON WBG Manuel utilisateur

Cooper Lighting

Cooper Lighting Invue 42 - 175W Manuel utilisateur

Saxby Lighting

Saxby Lighting Islay 68784 Manuel

LIGMAN

LIGMAN EU-10016-3 Manuel utilisateur

Cooper Lighting

Cooper Lighting McGraw-Edison ZD Credenza Manuel utilisateur

LIGMAN

LIGMAN KI-60475 Manuel utilisateur

Cooper Lighting

Cooper Lighting Generation CLB25MWW5C373 Manuel utilisateur

Malibu Boats

Malibu Boats CL905K Manuel utilisateur

LIGMAN

LIGMAN NYB-30161 Manuel utilisateur

LIGMAN

LIGMAN SI-80021 Manuel utilisateur

Malibu Boats

Malibu Boats CM110P Manuel utilisateur

U.S.T.E.

U.S.T.E. VISTA 8202 Manuel utilisateur