Vocality V150 Manuel utilisateur

Page 1 of 5

Configuration Guide : V150

The V150 shares option cards with the V200. All option cards that operate in the

V150 can operate in the V200, and all except the V200 PSU Card will work in the

V150. This guide outlines some sample configurations, the essential minimal

configurations, and the parts required.

Basic “Legal” Configuration

Unlike the V100, which had in-built serial data and IP ports, the V150 chassis offers

no actual ports apart from the power socket(s) and the connection socket for the

M&C cable.

The V150 ships in one of two power configurations:

VI68150 Chassis

or with the factory fitted redundant second power supply fitted:

VI68150 Chassis

VI68160 V150 Redundant PSU

If ordered without redundant power, the hole (above/right of the main IEC inlet) is

filled. If ordered with redundant power, the hole is replaced with a cable “pigtail”

connector with an IEC socket extending from the rear of the unit, for the second

power supply. There is no point sharing one IEC inlet for two power supplies if you

are going to have potential power issues outside the Vocality unit.

A basic “legal” configuration does not need the redundant second power supply. It

does, however, need a Standard CPU Card.

This minimum configuration offers a single IP port, and a single serial data port.

Whilst physically minimal, it could still be used as a powerful VoIP gateway device

with SIP license. The items used in this configuration (exclusive SIP licenses) are:

VI68150 Chassis

VI68151 Standard CPU Card

Page 2 of 5

Basic Voice Configuration

The V150 above is equipped with a Standard CPU Card. The Vocality range includes

a number of modules which can convert a Standard CPU Card into another card – an

Analogue Voice Card, or an Ethernet Switch Card, for example.

ALERT

1 STATUS 2 ENET DATA

CHANNELS 1-8

1234

5678

The Analogue Voice Card is a combination of a Standard CPU Card and the voice

module used in the V50plus.

The Analogue Voice Card delivers 4 enabled voice ports (the bottom row) whilst a

feature key can be used to soft-enable the top row of voice ports. IP Router and

serial data functionality is, of course, present in the unit.

The four port configuration is as follows.

VI68150 Chassis

VI68153 FXS Analogue Voice Card

For an eight voice port configuration, you will need the added feature key –

SWF/VOICE8 – to activate the second bank of 4 ports. Note: only the bottom 4

channels support 4 wire audio as well as 2 wire support.

Digital Voice Application

The Digital Voice Card for the V150 currently operates as a standalone card, which

can be installed in either (or both) the second and third option slots. Therefore, 1 or

2 x E1/T1 configurations are possible. The first option slot requires a Standard CPU

Card.

VI68150 Chassis

VI68151 Standard CPU Card

VI68207 Digital Voice Base Card (10 Channels) x 2

VI68715 Digital Voice Daughter Card (Expansion to full T1/E1) x 2

ALERT

1 STATUS 2 ENET DATA

CHANNELS 1-8

1234

5678

E1/T1

ALERT

UTP STATUS TX

E1/T1

ALERT

UTP STATUS

Page 3 of 5

Sample USA DoD Application (1)

This application is a sample application which could be used in a US DoD application.

It is shown because of the US DoD requirements for secure STU III and STE voice.

This configuration uses a basic chassis with an Analogue Voice Card installed. Also

installed on that card (in the first slot) is an 8 channel SVR Card – Secure Voice

Relay. This card allows all 8 ports to deliver STU III or analogue STE support. The

first of two routers is presented on this card.

ALERT PORTS 1 TO 4

EXPANSION

STATUS

DATA

ALERT

1 STATUS 2 ENET DATA

CHANNELS 1-8

1234

5678

ALERT

1 STATUS 2 ENET DATA

CHANNELS 1-8

1234

5678

The second slot has an Ethernet Switch Card, which uses an Ethernet module

connected to a Standard CPU Card to deliver a card with serial data and an 8 port

Switch presentation of the integrated router. The Ethernet port is disabled and re-

routed to the 8 port switch card.

Finally, for crypto serial data applications, we have included a 12 port serial data

card – shown here in the right hand slot. This card delivers 12 x 10Mbps serial data

ports, which are presented via 3 x Quadrapuss cables (high density connectors going

to 4 x HD DB15 connectors).

The parts list for this combination is:

VI68150 Chassis

VI68153 FXS Analogue Voice Card

SWF/VOICE8 Analogue Voice SWF > 8 Voice

VI68718/8 Secure Voice Relay 8 (Voice Card Add-On Module)

VI68154 Ethernet Switch Card

VI68204 High Speed Quad Data Card

VI68205 High Speed Quad Data Expansion Card

VI68160 V150 Redundant PSU (Optional)

Sample USA DoD Application (2)

The Digital Voice Card can be upgraded with a 30 channel SVR Card – Secure Voice

Relay. This allows up to 60 (or 48 using 2 x T1) channels to concurrently deliver STU

III, analogue STE and digital STE connectivity through a single V150 chassis. Such a

configuration could be used if IP is being used as a link aggregate, and secure voice

needs to be delivered over the link (eg. secure voice over IP-based satellite)

VI68150 Chassis

VI68151 Standard CPU Card

VI68207 Digital Voice Base Card (10 Channels) x 2

VI68715 Digital Voice Daughter Card (Expansion to full T1/E1) x 2

VI68718/30 Secure Voice Relay 30 (Voice Card Add-On Module) x 2

ALERT

1 STATUS 2 ENET DATA

CHANNELS 1-8

1234

5678

E1/T1

ALERT

UTP STATUS TX

E1/T1

ALERT

UTP STATUS

Page 4 of 5

Sample Satellite News Gathering Application

Vocality provides capabilities that make its products appealing to satellite news

gathering organisations.

The V25 and V50plus platforms are small, handheld (or desktop) devices which are

ideally suited to integration into non-standard flight cases, or being tucked into a

travel case or bag ready for a news assignment. A more formal installation, with the

comfort of an AC power supply and a rack mount environment calls for the V150.

It’s very rare that a day to day news gathering application requires more than 8

voice ports. The configuration shown above is a tradition one for a news gathering

vehicle.

Small Application (Day to Day News Comms)

VI68150 Chassis

VI68153 FXS Analogue Voice Card

This application supports IP or serial aggregates, with up to 4 telephony interfaces

which can be configured as 2 wire or 4 wire.

Large Application (Major Events)

VI68150 Chassis

VI68153 FXS Analogue Voice Card – Quantity 1 to 3

SWF/VOICE8 Feature Key unlocking channels 5 to 8 – Quantity 1 to 3

SWF/PEP TCP Acceleration

This application supports IP or serial aggregates, and because it’s for a major event,

there may be higher link bandwidths and demand for high TCP utilisation hence the

inclusion of the TCP PEP Accelerator. The FXS Analogue Voice Card delivers 2 and 4

wire audio on the base 4 channels, with 2 wire comms on the second bank of 4. The

V150 will take up to 3 voice configurations of this type – delivering a maximum of 24

voice circuits of which 12 can be configured to be 4 wire.

Page 5 of 5

Migrating Option Cards between V50plus, V150 and V200

(Analogue FXS Voice Module)

Modules are free standing feature devices that enhance a V50plus, or a Standard

CPU Card with a functionality.

An Analogue FXS Voice Card as used in the V150 comprised a Standard CPU Card

and an Analogue FXS Voice Module.

This Module can be taken from an Analogue FXS Voice Card and installed into a

V50plus.

(Standard CPU Card)

Likewise, a Standard CPU Card can be upgraded with an Analogue FXS Voice Module

to create an Analogue FXS Voice Card.

(Analogue FXS Voice Card)

This installation work can only be performed by an engineer who has attended

Vocality’s maintenance product course.

All option cards (horizontally) loaded into a V150 can be migrated to the V200

(vertically loaded).

These are just a few of the example configurations which can be achieved using the

V150. For more information, visit www.vocality.com

Table des matières

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur