Vivo STAND-V101N Manuel utilisateur

Single Monitor Desk Mount with Extra Long Arm

Scan the QR code with your mobile device or follow the link

for helpful videos and specications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v101n

SKU: STAND-V101N

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

TOOLS NEEDED

22lbs

(10kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

WARNING!

Phillips

Screwdriver

A (x1)

Arm

B (x1)

Clamp

C (x1)

Pole

M-A (x4)

M4x12mm Screw

M-B (x4)

M5x12mm Screw

M-C (x4)

M5 Washer

If you do not understand these directions, or if you have any doubts about the safety of the

installation, please call a qualied technician. Check carefully to make sure there are no missing or

defective parts. Improper installation may cause damage or serious injury. Do not use this product

for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.

We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or

inappropriate use.

D (x1)

Pole Cap

E (x1)

Grommet Plate

F (x3)

Arm Cable Clip

G (x1)

Support Plate

H (x1)

Pole Cable Clip

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

NOTE: SOME HARDWARE MAY NOT BE USED

I (x5)

Rubber Pad

S-A (x3)

M6x16mm Screw

T-A (x1)

4mm Allen Wrench

T-B (x1)

5mm Allen Wrench

T-C (x1)

6mm Allen Wrench

T-D (x1)

8mm Allen Wrench

T-E (x1)

19mm Wrench

ASSEMBLY STEPS

STEP 2

OPTION A: Clamp Installation

Mount Pole (C) to Clamp (B) using

M6x16mm Screws (S-A). Tighten using

4mm Allen Wrench (T-A). Apply the Rubber

Pads (I) to the underside of Clamp (B), then

attach Clamp (B) to the desktop.

OPTION B: Grommet Base Installation

Separate Clamp (B) by removing the

screws in back with 4mm Allen Wrench

(T-A). Remove the screw from the top

of Clamp Bolt (B1), then remove Clamp

Bolt (B1). Apply Rubber Pads (I) to the

bottom of Grommet Base (E). Place

Support Plate (G) onto Clamp Bolt (B1),

then insert Clamp Bolt (B1) through the

grommet hole and thread into Pole (C)

as shown in the diagram.

STEP 1

Insert Pole Cap (D) into the top of Pole (C).

S-A

T-A

STEP 3

Slide Pole Cable Clip (H) and Arm (A) onto Pole (C). Secure Arm (A) to Pole (C) using

5mm Allen Wrench (T-B).

STEP 4

Attach Arm Cable Clips (F) to Arm (A) as shown.

T-B

STEP 5

Insert two screws (M-A or M-B) and M5 Washers (M-C) into the top mounting holes of the

monitor, making sure to leave 3mm of thread exposed. Align screws in monitor over the

slots in the VESA plate. Secure using two more Screws (M-A or M-B) and M5 Washers (M-C)

in the bottom two holes of the monitor. Tighten all four screws using a Phillips screwdriver.

STEP 6

Adjust the tilt joint using 6mm Allen Wrench (T-C).

STEP 7

Store 5mm Allen Wrench (T-B) and 6mm Allen Wrench (T-C) in Pole Cable Clip (H) for

future adjustments.

T-C

T-B

STEP 9

Route cables through Arm Cable Clips (F) and Pole Cable Clips (H).

STEP 8

Tighten the joints in Arm (A) using 8mm Allen Wrench (T-D) with 19mm Wrench (T-E) and

6mm Allen Wrench (T-C).

T-D

T-F

T-C

T-E

LAST UPDATED: 06/01/2022

REV3

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table des matières

Autres manuels Vivo Support et étagère

Vivo

Vivo MOUNT-V002W Manuel utilisateur

Vivo

Vivo STAND-V002C Manuel utilisateur

Vivo

Vivo MOUNT-SONOS3W Manuel utilisateur

Vivo

Vivo STAND-V100G Manuel utilisateur

Vivo

Vivo STAND-V012C Manuel utilisateur

Vivo

Vivo STAND - TV02D Manuel utilisateur

Vivo

Vivo STAND-V002C Manuel utilisateur

Vivo

Vivo MOUNT-VW70G Manuel utilisateur

Vivo

Vivo MOUNT-VP06B Manuel utilisateur

Vivo

Vivo DESK-V000SD Manuel utilisateur

Vivo

Vivo STAND-V002T Manuel utilisateur

Vivo

Vivo STAND-V101 Manuel utilisateur

Vivo

Vivo STAND-V001O Manuel utilisateur

Vivo

Vivo MOUNT-SPSB1 Manuel utilisateur

Vivo

Vivo STAND-V000DC Manuel utilisateur

Vivo

Vivo STAND-V001T Manuel utilisateur

Vivo

Vivo STAND-TV65A Manuel utilisateur

Vivo

Vivo MOUNT-VW2X2A Manuel utilisateur

Vivo

Vivo STAND-V102G2D Manuel utilisateur

Vivo

Vivo DESK-V000KL Manuel utilisateur

Vivo

Vivo MOUNT-UVM02 Manuel utilisateur

Vivo

Vivo STAND-SP04H Manuel utilisateur

Vivo

Vivo MOUNT-POLE05A Manuel utilisateur

Vivo

Vivo STAND-V102D Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur