Vivo STAND-V100G Manuel utilisateur

Pneumatic Arm Single Monitor Desk Mount

Scan the QR code with your mobile device or follow the link

for helpful videos and specifications related to this product.

Instruction Manual

https://vivo-us.com/products/stand-v100g

SKU: STAND-V100G

[email protected]om www.vivo-us.com 309-278-5303

Chat live with an agent!

GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

PACKAGE CONTENTS

TOOLS NEEDED

4.4-26.4lbs

(2-12kg)

DO NOT EXCEED WEIGHT CAPACITY.

Failure to do so may result in serious injury.

Phillips

Screwdriver

A (x1)

Arm

B(x1)

VESA Plate

C(x1)

Pole

J (x1)

Support Plate

NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED

D(x1)

Base

E(x1)

Clamp

Brace

F (x1)

Clamp

G(x1)

Cover

H (x1)

Carriage Bolt

I (x1)

Grommet Base

K (x1)

M8 Nut

M-A (x4)

M4x12

M-B (x4)

M5x12

M-C (x4)

D5 Washer

WARNING!

If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a

qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may

cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do

not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly

or inappropriate use.

TIPOVER WARNING

SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:

• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR

STAND.

• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL

USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.

WARNING: CHOKING HAZARD

SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

S (x1)

6mm Allen

Wrench

L (x1)

M8 Washer

M (x3)

M6x16

R (x1)

4mm Allen

Wrench

N (x3)

M6x12

O (x2)

M6x10

P (x4)

Pad

Q (x1)

Cable Clip

T (x1)

Wrench

ASSEMBLY STEPS

STEP 1

OPTION A: Clamp Installation

Attach the pole (C) to the base (D) using

M6x16mm bolts (M) and tighten with the

4mm Allen wrench (R). Attach clamp brace

(E) to the base using M6x12mm bolts (N),

and tighten with the 4mm Allen wrench (R).

Apply pads (P) to each corner of the base.

For 3/8” - 2-5/32” (10-55mm) desktop

thickness, attach the clamp (F) to the

upper position on the clamp brace using

M6x10mm bolts (O) and tighten with the

4mm Allen wrench (R).

For 2” - 3-11/32” (50-85mm) desktop

thickness, attach the clamp (F) to the

lower position on the clamp brace using

M6x10mm bolts (O) and tighten with the

4mm Allen wrench (R).

Place the mount with clamp on the desk

edge and tighten the hand bolt. Place the

cover (G) on the back of the clamp.

OPTION B: Grommet Installation

Drop the carriage bolt (H) down through

the center hole of the grommet base (I),

making sure the counter-sink holes are

on the underside of the base. Attach the

grommet base with carriage bolt to the

base (D) using M6x12mm bolts (N), and

tighten with the 4mm Allen wrench (R).

Apply pads (P) to each corner of the base.

If a grommet hole is not present in the

desktop, drill a hole through the desktop

using a 3/8” (10mm) bit. Place the base

over the hole, then secure by attaching

the support plate (J) to the carriage bolt

protruding from underneath the desk using

the M8 nut (K) with M8 washer (L). Tighten

the M10 nut using the wrench (T).

STEP 2

Slide the cable clip (Q) and arm (A) down onto

the pole. Tighten the arm to the pole using the

6mm Allen wrench (S).

STEP 3

Attach the VESA plate (B) to the monitor using bolts (M-A or

M-B) with washers (M-C), making sure the arrow is facing

towards the top of the monitor, and tighten with a Phillips

screwdriver.

STEP 5

If needed, adjust the gas spring in the arm (A) to support the monitor using

the 6mm Allen wrench (S). While holding the arm in the straight forward

position, turn the screw in back clockwise to decrease support, and

counter-clockwise to increase.

CAUTION - To avoid damage to the monitor

and mount, always keep the arm in a horizontal

position while making adjustments.

STEP 4

Pull back the release lever on the support

bracket, then place the monitor with VESA

plate (B) into the support.

STEP 6

STEP 7

Adjust tilt support by turning the bolt on the side of the tilt joint using the 6mm Allen wrench (S).

Use the cable clips on the arm and pole to organize cables.

LAST UPDATED: 08/24/2020

Open Monday - Friday 7:00am - 7:00pm CST,

our dedicated support team can oer immediate assistance with rapid response times. If any

parts are received damaged or defective, please contact us. We are happy to replace parts to

ensure you have a fully functioning product.

FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com

[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M

- 23% within < 15m

- 38% within < 30m

- 61% within < 1hr

- 83% within < 2hr

- 92% within < 3hr

Love your new VIVO setup and want to share?

Tag us in your photo! @vivo_us

AVG. RESOLUTION TIME (within oice hrs): < 15 M

www.vivo-us.com

Chat live with an agent!

AVG. RESOLUTION TIME (within oice hrs): 5M 4S

309-278-5303

Table des matières

Autres manuels Vivo Support et étagère

Vivo

Vivo PP-CP-02H Manuel utilisateur

Vivo

Vivo MOUNT-KB03 Manuel utilisateur

Vivo

Vivo MOUNT-V001A Manuel utilisateur

Vivo

Vivo STAND-V006F Manuel utilisateur

Vivo

Vivo STAND-V004TG Manuel utilisateur

Vivo

Vivo STAND-SIT1BW Manuel utilisateur

Vivo

Vivo MOUNT-REC01 Manuel utilisateur

Vivo

Vivo STAND-V000D Manuel utilisateur

Vivo

Vivo MOUNT-PLAY3B Manuel utilisateur

Vivo

Vivo STAND-V101E Manuel utilisateur

Vivo

Vivo STAND-V100C Manuel utilisateur

Vivo

Vivo STAND-V012T Manuel utilisateur

Vivo

Vivo DESK-100E-RB Manuel utilisateur

Vivo

Vivo STAND-V012F Manuel utilisateur

Vivo

Vivo STAND-V001L Manuel utilisateur

Vivo

Vivo STAND-V101D Manuel utilisateur

Vivo

Vivo STAND-TV09B Manuel utilisateur

Vivo

Vivo STAND-V002LW Manuel utilisateur

Vivo

Vivo STAND-V000S Manuel utilisateur

Vivo

Vivo STAND-V003M Manuel utilisateur

Vivo

Vivo STAND-V002WD Manuel utilisateur

Vivo

Vivo DESK-V000M Manuel utilisateur

Vivo

Vivo DESK-V000SD Manuel utilisateur

Vivo

Vivo STAND-V103 Manuel utilisateur

Manuels Support et étagère populaires d'autres marques

Salamander

Salamander Acadia AC/W/L400/WH Manuel utilisateur

Fohhn

Fohhn VAT-09 Guide de l'utilisateur

ricoo

ricoo FS0522 Manuel utilisateur

AMSOIL

AMSOIL BMK-22 Guide rapide

Kargo Master

Kargo Master 48220 Manuel utilisateur

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Manuel utilisateur

ricoo

ricoo S1222 Manuel utilisateur

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Manuel utilisateur

VidaBox

VidaBox VB MNT FFS2 Manuel utilisateur

Welch Allyn

Welch Allyn 48960 Manuel utilisateur

Arkon

Arkon CM035-ST-2 Manuel utilisateur

PROEL

PROEL PLWIN60C Manuel utilisateur

Agilent Technologies

Agilent Technologies E2609B Manuel utilisateur

Mustang

Mustang MV-ARM4 Manuel utilisateur

Mounting Solutions

Mounting Solutions WRM-320 Manuel utilisateur

Pyle

Pyle PMKSPAD1 Manuel utilisateur

ShelterIt

ShelterIt 21208 Manuel utilisateur

SPL

SPL RackPack?4 1040 Manuel utilisateur